Advanced designs and researches for manufacturing : selected, peer reviewed papers from the 2nd International Conference on Materials and Products Manufacturing Technology (ICMPMT 2012), September 22-23, 2012, Guangzhou, China
著者
書誌事項
Advanced designs and researches for manufacturing : selected, peer reviewed papers from the 2nd International Conference on Materials and Products Manufacturing Technology (ICMPMT 2012), September 22-23, 2012, Guangzhou, China
（Advanced materials research, v. 605-607）
Trans Tech Publications, c2013
- : [set]
- Part 1
- Part 2
- Part 3
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The studies presented here cover the topics of product design, manufacturing and analysis, management and production scheduling, supply chains, CAD/CAM/CAE, reliability, fault diagnostics and quality monitoring, measurement techniques, technologies and equipment, dynamic analysis of mechanical systems and mechanical transmissions, fluid power transmission and control, mechatronics, industrial robotics, control technologies and intelligent systems, electronic and microelectronic technology, embedded systems, signal and intelligent information processing, software and computers in research and engineering solutions.
目次
Preface and Conference Organization
Chapter 1: Product Design, Manufacturing and Analysis
The Optimization Design of Overhead Traveling Crane's Box Girder
Requirement Forecasting of Equipment's Maintenance Spares-Parts Based on Exponential Smoothing Method
The Combined-Matching Design of the Tower Body of Tower Crane
To Analyze The Influence Factors on Energy Saving of Hybrid Bus
Optimization Design of Shading Shed Transmittance in Highway Tunnel Entrance
Application Study of the Virtual Tactile Design in Product Design
Optimization Design of Stack Package Warpage Based on Moldflow Software
A Parametric Study of the General Profile for Hydrodynamic Journal Bearings
The Exploration of Recycling Design of Furniture Products Based on Structure
Application of Improved Genetic Algorithm to Traffic Equipment's Rush-Repair in the Wartime
Application of Fractal Graphics in Fashion Design
Design of the Process and Equipment of Melt PEK Filter
Optimization Design Research on Manual Piston Pump
The Assembly Design of Non-Ball Mills
Static Analysis of Stator Housing of Screw Drilling Rig
Design of Non-Ball Mill Based on the Green Conception
Thermal Design and Simulation for Lithium-Ion Power Battery Pack Assembly
Preliminary Perform of PDM Technology in Automotive Design
Research on Storage Life of Electronic Equipment Based on Goodness of Fit Test Method
Optimizing Design of New Kind Acoustic Horns for Ultrasonic Machining Based on Finite-Element Method
Research of a Variety of Fuel Injection Timing Control Experiment Station for Automotive Engine
Virtual Shaping Design of Electrically Driven Hunting Cart
Application of Advanced Materials in Sports Engineering
A New Design Approach for PSS Conceptual Development
The Analysis of the Fly Shear Head Motion Track
Innovative Design of Portable Public Transport System for University Students
Appearance Design Research of Home Sealing Machine for Bagged Food
The Gate of General Top-Open Freight Train Security Investigation
The Application of Gray Clustering and Information Axiom Integrated in the Scheme Evaluation of Mechanical Products
Application of Accuracy Engraving Technique in the Complex Curved Surface Mould Processing
Collaborative Optimization on Structural Parameters of Scroll Compressor
Single Inlet Pressure Swirl Nozzle Stationary Wave Pattern and Quality Optimization
Application Boundary Element Method to Compute the Potential of the Eight-Needle Electrodes
Thermal Layout Optimization of Stacked Chip Based on Ant Colony Algorithm
Developing Size Specifications of 3D Body Models for Males Aged between 7 and 18
Assembly Line Balancing the Comparison of COMSOAL and MSNSH Technique in Motorcycle Manufacturing Company
A Novel Roller Chain Sleeve Crevice Identification and Orientation Device Design and Test
Study of Wheat Straw Weaving Process and Decorative Effect
The Analysis on Motion in Quiescence of Packaging Container Molding
Robust Design of an Ultra-Thin Centrifugal Fan on Fuzzy-Based Taguchi Method
Research on Key Technologies in the Field of Wood Saving and Substitution in Packaging of Electromechanical Products
Inverter Based on Improved Z-Source Structure for Off-Grid Type Wind Power Generation
Structure Design and Modeling for a Picking Bananas Manipulator
Reinforced Techniques Analysis of Goaf-Side Entry at Isolated Island Coal Face Based on FLAC Numerical Simulation
Design of the Spring Fixture for Aging Treatment
A Framework for Life Cycle Cost Estimation of a Product Family at the Early Stage of Product Development
Design of a Type of Semi-Automation Stretcher-Vehicle
Marine Oil Spill Emergency Response Research
Design and Kinematic Analysis of a New Grapple Mechanism
Classification of Men's Shoulder Shapes Based on Pyramid Method
Extraction of Design Factors of Product Family Based on Customer Needs
Strength Finite Element Analysis and Test Research of Steel Package Rotation Table Beam and Tumbler
Fuzzy Information Axiom in Conceptual Design Scheme Evaluation of Handling Equipments
Test Research on the New Electromechanical Axial-Flow Pump with Advantages of Small Vibration and Noise
Innovation Design Method of Product Base on Materials Innovation Technologies
Study On the Design Methods of Fast Moving Consumer Goods
Intelligent Design of Mechanical Products Based on Function-Knowledge-Structure
Development of Parts Family Manage System Based on PDM in Large-Scale Air Separation Equipment
An Efficient Torlerance Robust Design Method Based on Taguchi Theory
Research on Electric Power Equipment Preventive Maintenance Cycle on the Basis of Economic Life Cycle Costing
T91 High Temperature Reheater Piping Leakage Analysis
Accessories' Matching Design Study and Development
Evaluation Model of Aircraft Maintenance Mode Based on Improved AHP
Design and Realization of Hand-Held Smart Electrothermal Umbrella Applied New Materials
Research on Individualized Requirement Modeling Oriented to the Dynamic Synchronization
The Research and Application of Seeding Machine's Dislocation Type Seeding Device
Design of a Kind of Drilling Machine for Semicircle Shaft
Stability Analysis of Pumper and Finite Element Analysis of Ladder Structure for a Scaling Ladder Pumper
A Novel Approach to Evaluate the Stability of Production Manufacturing System Based on Petri-Net and Analytic Hierarchy Process
Research and Design of a Novel Mobile Police Station
Design and Simulation of Visual Miniature Loop Heat Pipe
Improvements in Manufacturing Processes in a Graphical Analysis as Result of Kaizen Events
A Comparison Study of Small Displacement Torsor and Analysis Line Methods for Functional Tolerance Analysis
Ontology-Based Knowledge Representation for Mechanical Products
The Conceptual Design of Table Jaw Based on Functional Principle Design
The Tolerance Optimization Design of Displacement Pump
Customer Evaluation and Selection Method of Real-Time Innovative Design Based on the Network
Study of Regenerative Braking Model and Simulation of a Car
DFSS of a Diagonal Impeller
A Fast Point-Sampled Model Denoising Algorithm for Product Design
The Finite Element Analysis on the Crossbeam of Full Automatic Hydraulic Tile Press
Optimization of Micro Wind Turbine for Dental Fiber Handpiece Based on the Taguchi Method
Stress Analysis of the Adhesive Used in a Hard Disk Drive Bearing Assembly Using Finite Element Model
Innovative Design of Hydraulic Driving Drum for Belt Transfer Machine
Study on the Novel Spinning Technology of Broken Silk Fancy Yarn
An Investigation on Development of Seat Cooling Fan for Vehicle
Design and Research on Wind-Solar-Diesel Hybrid Generating System at High Altitude
A New Cast Stone Roller Kiln and its Combustion Control Approach
High-Efficiency Solar Power Supply Design
Simulation Research about Web Press Paper Tape the Second Time Tension Control Based on MATLAB
Research on Ride Comfort of Nonlinear Vehicle Suspension
Collaborative Design Optimization of Main Movement System of Hydraulic Piston Engine
Study on Torque Converter with Adjustable Guide Vanes of Hydrodynamic Speed-Adjusting Wind Turbines
Analyzing on the Principles of Intelligent Furniture Design
Analysis of Fabric Reconstruction Problem in the Apparel Production Design and Manufacture
Pilot Investigation on the Driving Posture Comfort among Malaysian Drivers
Product Style Map - An Effective Tool for Product Strategy Planning
Chapter 2: Management and Production Scheduling
Research on Exhibition Logistics Information System Designing
The Intelligent Forecasting Method of Mine Equipment Maintenance Plan
Flexible Job-Shop Scheduling Problem under Uncertainty Based on QPSO Algorithm
Information on Risks and Prevention of the Supply Chain in E-Commerce Environment
The Architecture for Solving the Cross-Domain Keywords During New Product Development
Spare Parts Production Planning Model Based on Fuzzy Programming
Value Chain Theory and its Application in Steel Enterprises
Business Process Management for Information System Implementation in Discrete Manufacturing Workshops Based on Multi-Agent Simulation
Research on Confidence Degree of Enterprise Alliance under the Environment of Network-Based Manufacturing
Scheduling to a Common Due Date on Unrelated Parallel-Machine with Deteriorating Jobs
The Research of Heuristic Algorithm for Flow Shop Scheduling Problem
Research on the Application of Operation Characteristic Curve in the Sampling Inspection for Foods in Prepackages with Fixed Content
Study on Coal Lean Mining Theory and Practice
A Multi-Issue Negotiation Based Task Allocation in Virtual Enterprise
Chapter 3: Supply Chain
Introduction of IOT Technology in a Logistic System for High-End Wine Sales
Study on Supply Chain Performance Evaluation Method of Equipment Spare Parts
Optimization of Port Supply Chain Super Network under Electronic Commerce
Study on Chinese Container Associates and its Construction Strategy
Energy-Saving Technologies of WSN
Study of Container Transport Planning Model and Algorithm
Modeling and Optimization of Traceability System for Agriculture Products Supply Chain
Design of Manufacturing Logistics Service Platform in a Certain Area
Chapter 4: CAD/CAM/CAE
To Solve Mechanical Working Space by Applying Graphic Integration in ADAMS
A Rapid Design System for the Transmission System of Mounter Worktable Based on Second Development of SolidWorks
Model and Finite Element Analysis of a Bus Body
Optimization Design of a Bus Body Frame
Modeling Method and Application in Digital Mockup System towards Mechanical Product
The Application of AutoCAD Software in Forestry
A New Way of Virtual Prototype Design and Analysis for Tractor Steering System
Offshore Platform Deck Crane Fatigue Analysis Based on Abaqus
Simulation of Crank-Rocker Mechanism on Finite Element by ANSYS
Characteristic Study on Temperature Field of Hydrostatic Bearing of Hydroforming Machine
Study on the Design Method of Testing Fixture for Bent Tube Based on UG
Parameterized Modeling of Circumferential MEFP Warhead Based on Characteristics
Research on the Virtual Assembly-Disassembly and Repair of the Automobile Drive Axle
3D Modeling and Motion Simulation of Single Surface Corrugated Machine Based on SolidWorks
ANSYS Application in Modal Analysis of Bus Body Frame
Calculation of Tilting Torque for Converter Based on Solidworks
A Single-Phase Electric Harmonic Monitoring System Design Based on the LabVIEW
Optimization and Application of STL Model Slicing Algorithm in Rapid Prototyping
Motorcycle Modeling with SimMechanics
System Dynamic Characteristic Simulation of Spacecraft Propulsion System Based on AMESim
Study on Parametric Assembly Modeling of Standard Parts with Assembly Level of Mold Based on UG Secondary Development
ANSYS-Based Finite Element of Rear Frame in Underground Transport Vehicle
Chapter 5: Reliability, Fault Diagnostics and Quality Monitoring
The Common Mode Failure Analysis Based on Markov Model
Research on Intelligence Inspections of Gear Profile Deviation
Research on Reliability Qualification Test of Mechanical and Electric Equipment Onboard
Research on Fault Diagnosis for Bearing of CNC Machine Tools
Multiple Reference Impact Testing for Bridge Assessment with Drop Hammer
An Independent Component Analysis Based Defect Detection for the OLED Display
Fault Diagnosis of Valve Train of Internal Combustion Engine Based on the Artificial Neural Network and Support Vector Machine
A Note on the Early Failure Period for CNC Machining Tools
High Order Spectrum Characteristics of the Elevator Fault
Field Test of Wellbore Anti-Collision Monitoring System
The PHM Research of Vessels Equipment Based on Condition
Large Pendulum Shaft Failure Analysis and Countermeasure Research
Electromagnetic Nondestructive Testing in Cracked Defects of Oil-Gas Casing Based on Ant Colony Neural Network
The Research and Analysis on Valve Reliability of Reciprocating Compressor
The Reliability Estimation of Double-Parameter Exponential Distribution on Zero-Failure Data
Application of Measurement System Analysis in Controlling the Gun Maintenance Quality
Research on Parameter Distribution of Interval Deleted Data with Turnbull Estimation
Stress Analysis of Ultra-Supercritical and Electrical Three-Way Valve Body Intensity in a High Pressure Heater Using FEM
Credibility Measure and Assessment Method of Equipment Severity to Voltage Sag
Discussion about Circuit Board Fault Diagnosis Based on D Algorithm
Research on Fault Diagnosis Based on TEAMS
Mechanism Movement Reliability Analysis of Galting Gun
Sensitive Equipment Failure Assessment Caused by Voltage Sags Using Interval Probability
Tooth Surface Contact Fatigue Reliability Analysis of Cycloidal Gear Based on Monte-Carlo
Fault Location for Transmission Line with Shunt Reactors
Impacts of Protection Cooperation on Voltage Sag Frequency and Sensitive Equipment Trips
Fracture Reason Analysis for Helical Gear Shaft of Converter Tilting Mechanism Senior Reducer
Fault Diagnosis System of the Fire Control System Based on Fuzzy Neural Network
The Fatigue Life Research on the Crossbeam of Automatic Hydraulic Tile Press
The Fault Diagnosis Model of FMS Workflow Based on Adaptive Weighted Fuzzy Petri Net
Safety Analysis and Design of Wireless Monitoring System
Chapter 6: Measurement Techniques, Technologies and Equipment
Recognition of Branch Insulation Parameters in Coal Mine Distribution Network using Least Squares Method
Application of Sliding Window-Genetic Programming Algorithm in Alert and Forecast for Mine Safety Monitoring
Camera Calibration of Binocular Vision Based on Virtual 1D Target
The Electronic Measuring System Design of Identifying Freshwater Fish Meat with Different Freshness
Chapter 6: Measurement Techniques, Technologies and Equipment
A Low Frequency and High-Precision Microbarograph Monitoring System
Research on Key Technologies of the Needle Loom Condition Monitoring System
Determination of Multi-Element in Egg of Poyang Lake Anas platyrhynchos by ICP-AES
Method of Disease Diagnosing Based on SVM and Rough Set
The Design of Pressure Meter Based on Ultralow-Power Consumption Technique
Road Load Spectrum Collection and Analysis of AMT Actuating Mechanism
Research on the Computational Algorithms for Layer Wound Linear Variable Differential Transformers
Classification of Floral Origins of Honey by NIR and Chemometrics
Modeling and Simulation of the Dissolved Oxygen Monitoring System in Aquaculture
Researches on the Size Measurement of Mechanical Parts Based on Image Processing
Feature Extraction of Leaf Images for Mite Disease in Cotton Fields
Research of Ultrasonic Flow Detection Method Based on Hydrodynamics Analysis
Research on Non-Invasive Measurement of Optical Parameters of the Tissues by Support Vector Machine
Determination of Trimethylamine in Air by Cataluminescence-Based Gas Sensor
Monitoring and Research of Power Ultrasonic Honing Vibration Frequency
Granary Temperature and Humidity Detection System Based on MCU
Flow Rate Measurement Method and Apparatus of Thick Pastes
Principle Error Analysis of Three-Point Supporting Type Barycenter Measurement System
Design of Data Acquisition and Storage System for Digital and Analog Signal Based on FPGA
Study on the Attenuation Behavior of Acoustic Wave in ER Fluid
An Measuring and Evaluation Method of Coaxiality Error for Large-Scale Holes
Vehicle Braking Efficiency On-Line Monitoring and Evaluation with MFDD
FEM Study on the Dynamic Effects of CMM Geometric Errors
Design of Measurement System for Solid Propellant Kneading Machine's Pot Temperature
Sizing System for Automatic Construction of Dress Shirt Patterns for Men
Structural Damage Detection of the Simple Beam Based on Responses Phase Space
Wheat Sedimentation Value Determination Based on Near Infrared Spectroscopy
Automatic Identification of Crack in Ultrasonic Infrared Imaging
The Curing Residual Strain Monitored by Fiber Bragg Grating Sensors
The Design and Implementation of the Terminal in a Vehicle Exhaust Real Time Detecting System
A Test of Mtem' Application in the Iron Mine ahead to Explore the Water
Research on the Utilization of Smart Meters' Information under the Background of Smart Grid
A Sinusoidal Grating Design and Performance Analysis
Method of Dynamic Detection for Clutch of Real Vehicle Based on RFID Technology
Research on Aerocraft Attitude Testing Technology Based on the BP ANN
Research and Application of Portable Real Protection Potential Measurement System of Buried Steel Pipeline
Application Research on Aqua-Sim for Underwater Acoustic Sensor Networks
The Insights of Node Deployment for Localization Accuracy in Underwater Acoustic Sensor Networks
Application of Self-Calibration in Flatness Assessment
Determination of Residual Organic Solvents in Antitumor di-phenyl-di-(2,4-dichlorobenzohydroxamato)tin by Capillary Gas Chromatography
The Design of Real-Time Power Detection System in Communication Equipment
Research on Frequency Conversion & Selective Measurement and Error Correction Algorithms in Grounding Characteristics Measuring System
Identification Research on CMP Multi-Zones Pressure System
Measurement of Spacecraft Simulator Motion Parameters Based on Multi-Vision System
The Radius of an Ultrashort Pulsed-Laser to Fresnel Diffraction of a Serrated Aperture
Study on the Online Dynamic Weighing System of Heavy Duty Apron Feeder Based on Labview
A Least Square Solution for Energy-Based Source Localization in Sensor Networks
Design of the Time Interval Generator Automatic Verification and Management System
A Height Estimation Method Based on Joint Time Delay and Phase Estimation for Wideband InSAR or InSAS
Chapter 7: Dynamic Analysis of Mechanical Systems and Mechanical Transmissions
A Study on Drive Capstan Stiffness of Cable-Driven Picking Manipulator
Structural Vibration Control of the Magnetic Flywheel Based on GA-PID Neural Network
Dynamic Analysis of Variable-Step Feeding
Vibration Characteristic Similarity Appraisal of Conticaster Vibration Table
The Abnormal Vibration Source Analysis of Automobile Drive Axle
Study on the Non-Linear Dynamic Stability of a Cracked Rotor System
Enclosure Active Structure Acoustic Control Based on Multi-Agent System
Effect Factors Analysis of Flow Generation Noise from Muffler Element with Inserted Tube
Study on Impact of Powertrain Mounting Stiffness on Vehicle Vibration Characteristics
Research on Influence of Intertooth Space Confriction to Transmission Efficiency under EHL
A Vibration Analysis and Evaluation System Construction Based on On-Line Inspection
Vibration Transfer Analysis of High Speed Train Considering Car body Flexibility
Dynamical Analysis for Mechanical Arm of the Coal Sampling Machine Based on Rigid-Flexible Coupling Model
A Modal Analysis of Eccentric Shaft of Caster Vibration Device
The Development of Structure Random Vibration Parameter Analysis Tool Software under Hot Environment Condition
Virtual Prototype Modeling and Dynamic Simulation for a Large Pendulum
Study on Dynamic Simulation of Hydraulic Die Forging Hammer Based on VPT
Research of Dynamic Performance of Reciprocating Compressor Valve
Vibration Modal Analysis of the Upper Frame of Hydraulic Excavator
Analysis on Structure Stress Characteristics of Top and Low Slewing Frame of Tower Crane
Analysis of Local Stress and Vertical Deflection of Down Chord of Inverted Triangle Cargo Boom of Tower Crane
The Design of Transmission Scheme of the 6-Speed Automatic Transmission Based on the 01N Automatic Transmission
Analysis on Dynamic Characteristics of Paper Feeding Device
Dynamic Simulation and Analysis of a Dual-Link Suspension
Dynamic Performance Analysis for Milling Head Box of Spiral Drill Collar Machine
Analysis and Modeling of Error Sources for Spiral Bevel Gear Honing Machine Based on Multi-Body System Theory
Optimization Method of the Rubber Elastic Element Structure Based on the Vibrational Power Flow
Transmission Study on Dynamic Characteristics of Front Suspension LCA Bushing
The Study on Experimental Modal Analysis of High-Speed Rotational Shaft
Modal Experiment and Analysis of Needle-Punching Machine
The Performance Study of Three-Ring Gear Reducer
Influence of Top-Structure Form of Tower Crane on the Factor for Hoisting a Grounded Load
Research on the Dynamic Characteristic of the Bogie in Dynamic Track Stabilizer on Working Conditions
Dynamic Analysis of a Free-Free Beam
Research on Involute Master Measuring Apparatus
Dynamic Analysis for New Low-Speed Motor with Interior Pushrod Harmonic Transmission Device
Methods for Determining the Dynamic Load of the Shipbuilding Gantry Crane
Distribution on Transmission Ratio of Cylindrical Gear Reducer
Chapter 8: Fluid Power Transmission and Control
The Electro-Hydraulic Proportional Technology-Based Experimental Research into Gradually Pressurization System on Cotton Lap of Roll Machine
Finite Element Stress Analysis of Intersection Region of Nozzle and Blind Flange
Research on Optimization of Flow Field in 60t Tow-Strand Tundish by Hydraulic Model
Design and Analysis of Hydro-Viscous Winch Hydraulic System
Hybrid Excavator Test Bed Hydraulic Load System Design
Research on Pneumatic Performance of Aero-Engine Blades through Function Method
Study on De-Icing Fluid Pump Station's Flow Pulsation Suspension Methods
Simulation of the HCCI Combustion Based on Single-Zone Combustion Model
Design and Implementation of the Integrated Test Platform for the Hydraulic Components
Prediction Model of Control Valve Characteristics
Numerical Simulation of Convection Heat Transfer in a Plate Channel with Sintered Copper Porous Ribs
Theoretical Study of Transmissivity of Electromagnetic Wave in Magnetorheological Fluids
Research on Maximum Wind Energy Capturing of DFIG
The Research of Internal Fluid State Influence in the Divergency of the Straight Cone-Shape Draft Tube
Fluid Field Analysis for Cyclone Separator Used on Grain Cleaning
Impeller Finite Element Analysis of Extractable Explosion-Proof Contra-Rotating Axial Fan for Mine Local Ventilation FBDC
Chapter 9: Mechatronics
A Linear Macro/Micro Platform Design Based on FEM Simulation
The Effect of Electrode's Material on Immobilization of Sulfite Oxidase Enzyme in Construction of Sulfite Biosensors
A Human Half-Top Kinematic Motion Tracking System Based on Disparity Information of Stereo Camera
Map Matching-Aided In-Motion SINS Initial Alignment
Modeling and Design of 3D Visualization on Giant Magnetostrictive Actuator
A DSP-Based Control System for Precision Variable Rate Fertilization
Design of a Type of Cleaning Robot System
Analysis of the Biomechanics of the Fingers in Different Writing Stances
Modeling of Five-Axis Linkage WEDM for Complex Curved Surface and its Simulation
The Study of 3-D Magnetic Field Finite Element Analysis for Giant Magnetostrictive Actuator
Development of a Precision Micro-Assembly Machine for ICF Targets
Development of Integrated Testing Instrument for Mechatronic System
High-Temperature Capacitive Mode Pressure Sensor Based on SiC
Characteristics Ansys of Hydraulic Cushion for High-Speed & High-Precision CNC Lathe
Optimization Problem Research for Machining Accuracy and Cost of CNC Lathe Based on Adaptive Particle Swarm Optimization
The Navigation and Positioning Method of Active plus Passive Ultrasound-Guided Robot for Liver Cancer Coagulation Therapy
Sensitivity Analysis and Numerical Simulation of the Planar Mechanism Kinematic Accuracy
The Kinematic Modeling of a 2-DOF Rotational Parallel Fixture
Design and Realization of Helical Rotor NC Automatic Programming System
Design of AMT Hydaulic Shift System Based on the Logical-Shift Formula
Fuzzy Adaptive Terminal Sliding Mode Control for Attitude of Flapping Wing Micro Aerial Vehicle
Novel Compensator for Aircraft Electromechanical Actuator
Research on Magneto-Rheological Torque Servo Devices
Study on Tilt Properties of Orifice-Compensated Aerostatic Thrust Bearings
Research on the Internal Model Decoupling Control of High Speed Spindle
Path Recognition Method for Vision Navigation of Tobacco Harvester
Research of CNC Automatic Programming Method Based on Process Database
Error Analysis of a 2-PRS/2-UPS 4-DOF Parallel Platform
Dynamic Analysis of Key Parts of CNC Milling Machine Based on FEM
Finite Element Analysis of Milling Head Box of CNC Machine Tool
Statics Analysis for the Crossbeam of Large Gantry CNC Machine under Six Working Conditions
Automobile Frame Side Rail Detection System Based on Machine Vision
A Practical Algorithm for Ball-End Mill Using a Five-Axis CNC Grinding Machine
The Application of PLC in the Stepper Motor Closed-Loop Control System Design
Dynamic Analysis and Structure Improvements on Machine Tool Bed
Chapter 10: Industrial Robotics
Structural Design of the Robot Arm for Massage Based on the Chain Drive
Temperature Uniformity Control in the Low Pressure Process Champer of the IC Equipment
Study on Two-Step Method for Robot Dynamics Parameters Calibration
The Path Optimization of Spray Painting Robot for Two Path Pattern
Analyzing Moving Character of a Novel Parallel Mechanism
Forward and Inverse Position Solution Analysis of 2UPR/1SPR 3-DOF Parallel Mechanism
A Hardware & Software System for Unmanned Ground Vehicle Control with Robotic Arm & Color Detection
Robust Adaptive Sliding Mode Synchronous Control for a Planar Redundantly Actuated Parallel Manipulator
Research on Pneumatic Control System of Box Unfolding and Closing Mechanism of Horizontal Type Boxing Line
Path Planning with Motion Optimization for Car Body-in-White Industrial Robot Applications
Industrial Robot Control Using Inertial Navigation System
Application of Optimized BPNN Based on QGA in PID Control of Coal Mine Detection Robots
An Introduction to Parallel Robot Mechanism
Ant Colony Optimization Based on Local Optima Breaking Mechanism for Unmanned Vehicle Path Planning in Cross-Country Environment
Study on Genetic Fuzzy Wavelet Neural Network Controller of Robotic Manipulator
A New Design of Programmable Multi-Axis Controller
A Robot Vision System in ABU Robocon Contest: Visual Servoing Navigation and Object Tracking
Chapter 11: Control Technologies and Intelligent Systems
Duffing Chaotic System Stability Control Based on Sliding Mode Control
An Intelligent Water-Saving System
Study on Data Detector of Synchro-Self-Shifting Clutch on Combined Diesel or Gas Turbine Power Plant
The PLC Control System of Box Processing Combined Machine Tool
Parameterization of Emotion Expression through Robot's Body Language
The Effect of Hexa-Orientation Press Control System Development on Diamond Material Grade
Multi-Echelon Integrated Inventory Control Strategy of Equipment Spare Parts
Research on Vacuum Consumable Arc Remelting Furnace Control System with Drop Short Pulses Testing
A System of Multistep Self-Learning Forecast and its Application on Oil Refining Industry
Application of Critical-Siphon Theory to Fastest Deadlock Controller for a Class of Flexible Manufacturing Systems
Remote Monitoring System on Mining Visualization
The Analysis of Soft Starting System of Brushless Excitation Synchronous Motor
Based on Adaptive Control in the Process of the Liquid Level Instrumentation Control System Design
The Design of AGV Control System and its Application in Printing Center
An Exception Handling Approach for Service-Based Business Processes
The Research on the Intelligent Control of Geographic Information System Design to Agricultural Production
The Vehicles ESP Safe Test System Based on Aid Wheels Breaking Control Vehicle System
Design and Implementation of Remote Monitoring System for UPS in Unattended Observation Station
Quantum Artificial Bee Colony Algorithm for Knapsack Problem
Research on Control Technology of Hydro-Viscous Winch
A Chaotic Cellular Neural Network System Research and Implementation Based on FPGA
Chapter 11: Control Technologies and Intelligent Systems
Research on Cogent Automatic Fingerprint Identification System
An Improved Fast Intelligent Tracking Algorithm with the Gain Adjustable
The Research and Design of Smart Home Based on Virtual Reality Technology
Development of Full-Automatic Flap Disc Production Machine Based on PLC Control System
Research on Influencing Spreading Model of Road Congestion Based on Traffic Flow and Cellular Automata Approaches
Pole-Placement for Multi-Input Linear Systems by State Feedback or State-Derivative Feedback
The Design of the Monitoring System Based on Marine Environment Buoy
Automatic Liquid Level Detection System Based on LabVIEW
A New Intelligent Device Used for Monitoring Environment Safety
Quasi-Likelihood Deconvolution of Non-Gaussian Non-Invertible Moving Average Model
The Flow Ratio Process Control System Design Based on Improved PID Algorithm
Research of Coke Rate Prediction of Blast Furnace Based on Operative Characteristics of Auxiliary Resources
Design of Chemical Water Treatment Control System Based on Quantum PLC
Research on Intelligent Elevator Control System
Application of the PID Control in Mine Calorific Value Regulating System Based on PLC
Identification and Control Design of Fuzzy Takagi-Sugeno Model for Pressure Process Rig
A Merging Method for Siphon-Based FMS Maximally Permissive Control with Simple Structures
The Application of Fuzzy Smith-PID Controller on Geothermal Air Conditioning System
Research on Automatic Testing System of Vehicles Steering Angle
Improvement of Set-Covering Weighted Control Model of S3PR
Research and Application of Automation Controlling System for Plate Ultra Fast Cooling Process
Structures for Weakly Dependent Siphons of S3PR
Stability Analysis of Quantized Feedback Control System
Intelligent Algorithm in Automatic Fire Alarm Application
The Design of Dynamic Response System Based on Digital Emergency Plan
Parallel PSO-Based Optimal Strategy Study of Energy Efficient Operation Control for Train
The Improvement of Control System of Wind Turbine Gearbox Test Device
Chapter 12: Electronic and Microelectronic Technology
Design of a SoC With High-Speed DDC for Software Radio Receiver
The Application Study of Multifunctional Injuries-Simulating Platform
Multi-Band Antenna of Mobile Handset with Metal Frame for Wireless Communication
Spacial Filter of Weighting Method Based on Spectrum Analyse
One Kind of Study of the Even Charge-up Method of Intelligence for Common Storage Battery Group of UPS
Experimental Analysis on Initial Arc Column Voltage Gradient in Fuse Filled with Silica Sand
A Effective Equalization Based on Multi-Mode for Series Grouped Battery Strings
Design and Implementation of Robot Soccer Communication Protocol Based on Ant Colony Algorithm
Design of the Equalizing Charge Circuit Based on Bidirectional Energy Transfer
A Novel Three-Port Combiner Based on Coaxial Cavity
Development of Uphole Monitor for MWD in Underground Directional Drilling in Coalmine
An Opto-Electronic Image Sensor Using for Low-Light-Level in Neutron Digital Radiography(n-DR)
Application of Kalman Filter in SOC Estimation of Power Lithium-Ion Battery
Poly-NiO/Nb:SrTiO3 Based Resistive Switching Device for Nonvolatile Random Access Memory
Design of Counting Device for Contact IC Module
The Improved Design of Engine Ignition System
A Parallel Space-Time Block Code Based Transmission Scheme
Research for Biofouling Detection Based on Optical Fiber Self-Referencing Technique and ANN
Synchronization and Anti-Synchronization of the Chaotic Modified Chua's Circuits via a Same Controller
Research on UCAV Communication Data Link Capability Increasing Scheme
On Application of LDPC Coded Modulation in Optical Fiber Communication
Design and Implementation of Radio Spreading-Sequences Beacon Based on Quadrature Frequency-Conversion
Design of High-Speed Remote Image Data Storage Memory Based on LVDS
Polarization Changes of Elliptically Polarized Laser Beams Propagating in Slant Path through Turbulent Atmosphere
The Research and Analysis about Attenuation Characteristics of Wireless Signal in Limited Space
The Intelligent Design of Solar LED Street Lamps Based on MCU
Design of Automobile Exhaust Wireless Monitor System Based on GPRS/GSM/GPS
Design of Azimuth-Sign Wireless Autonomous Positioning System
A Highly Directional Light Emitting Diode Light Guide Bar Based on Concave V-Grooves
A Low-Distortion Single Fingerprint Acquisition Optical System
The Anomalous Threshold Voltage Prediction by Grey Model GM(1,1) for Submicron MOSFETs
The Light Extraction Efficiency Enhancement in Organic Light-Emitting Diodes with Substrate Modifications
High Efficiency Performance of Stack-Gate 0.35um P-Channel Flash EPROMs
Three Dimension Thermal and Mechanical Simulation of Microbolometer to Detect Terahertz Wave
Simultaneous Synchronization and Anti-Synchronization of the Two Identical BVP Oscillators
A Mobile Computing SoC Design
Design and Simulation of High Gain X-Band Horn Antenna for Calibration
The Special Research on a Low Noise Amplifier
Use of the Fuzzy-Based Taguchi Method for Improving the Yield of BGA Packaging
Chapter 13: Embedded System
The Contactless Card Reader Based on Microcontrollers
The STM32 and Programmable Power Supply Communication in the ELID Grinding Dynamic Control System
Embedded Measurement Platform Design for Mine's Dynamic Weighing Bridge
The Development and Application of the Basic Functions of the EMS of Four-Cylinder Gasoline Engine
The IP Design for a Customized Mobile SoC
Embedded Systems to Build Modern Automation and Manufacture
An FPGA Based Frame Rate Enhancer for LCD Display in Embedded Systems
Study of Embedded Power Environment Remote Video Monitoring System
Chapter 14: Signal and Intelligent Information Processing
Signal Separation Based on Focused Neural Network Filter
Adaptive Reconstruction Based on Romp Algorithm
Moving Target Detection Based on Principle of Connectivity and Texture Gradient
Shadow Detecting and Shadow Interpolation Algorithm for InSAS
A Robust and Rapid Image Preprocessing Method for Finger Vein
Weight to Vision Neural Network Information Processing Influence Research
Particle Swarm Optimization Least Square Support Machine Based Missing Data Imputation Algorithm in Wireless Sensor Network for Nuclear Power Plant's Environmental Radiation Monitor
Research on the Edge Detection Method of the Rice Leaves Image Based on Phase Consistency under the Complex Environment
A Hybrid Method to Search the Optimal Hamiltonian Circuit
Morphological Reconstruction Based Segmentation of Lung Fields on Digital Radiographs
Coordination Method on Cloud Computing Clusters
The Method of Feature Extraction of Weak Multi-Frequency Signals Based on the Array of Modulated Stochastic Resonance
The Fusion Process of RS(Remote Sensing) Data Based on Wavelet Neural Network
Research on the Optimized Algorithms on Neural Network
Classification of Single Cereal Grain Kernel Using Shape Parameters Based on Machine Vision
Detection for Corn/Weed Images Using Moment Invariants by BPNN Classifier
On Implementation of Software Acoustic Cancellation
A New Variable Step Size LMS Adaptive Filtering Algorithm and its Analysis
Low SNR Singal Recovery System Based on Stochastic Resonance
Research on Improved Image Enhancement Algorithm Based on Fuzzy Set
A Novel Method to Estimate the Unknown Mixing-Matrix for Blind Source Separation
An Information Fusion Algorithm Based on Dopplerlet-Hough Transformation
Study of Adaptive Chaos Embedded Particle Swarm Optimization Algorithm
Radio Channel Research in Coal Mine Laneways
Yawning Detection Based on Mouth Feature Points Curve Fitting
Cartoon Avatar Processing Based on Image Edge Detection
Analysis of Airplane Timing Equipment's Automatic Test Based on ATS Platform
Image Texture Feature Extraction & Recognition of Chinese Herbal Medicine Based on Gray Level Co-Occurrence Matrix
Classification of Biological Spectrum Based on Principal Component Cluster Analysis
Image Restoration Based on Improved PSO Algorithm
Convergence of a Class of Nonorthogonal Wavelet
Research on a Kind of Distribution Selection Method for Right Censored Data Based on Data Expansion Algorithm
Improved Vision Based Driving Space Analysis by Condensation of Image Data
Application of the Compound Model of BP Neural Networks and Wavelet Transform in Image Definition Identification
An EEG Analysis Research For Epileptics Using Probabilistic Neural Network
Object-Oriented Zhangjiangkou Mangrove Communities Classification Using QuickBird Imagery
Applying Data Mining Methods to Structural Identification
Inter-Harmonic Detection Based on AR Model Spectral Estimation and Nonlinear Optimization
Chapter 15: Software and Computer in Research and Engineering Solutions
Ranking Algorithms for Keyword Search over Relational Databases
The Application of Bezier Curves about the Visualization of the Threaded Binary Tree
Research and Design of the Automobile OBD Data State Monitoring System Based on the Android Phones
Fidelity Evaluation of Bridge-Type Grab Ship-Unloader Visual Simulation
Risk Assessment of Smart Grid Cyber Security Based on Multi-Level Fuzzy Comprehensive Evaluation Method
Scene Simulation of UUV's Glide Motion Based on Creator and Vega Prime
Research on the Die Steel Cutting Simulation System Based on Intelligent Layout Algorithm
Analysis on A 1-out-n Security Protocol Based on Threshold Idea
The Study of Military Conceptual Model Based on Tactical Decision-Making Simulation
Managing Emergency Material Distribution Knowledge Using Ontology-Based Modeling for Emergency Distribution Decision
Security Design of Web-Based Information Integrated System
The Application of Improved Color Petri Net in Hardware Design
An Approach of Web Service Discovery and Composition Based on Logic Petri Nets
ZigBee Technology Application in Disaster Rescue
Parallel Computing Application in Rectangle Packing Problem
The Research of Railway Passenger Flow Prediction Model Based on BP Neural Network
On Visualization of Journals Reference Network Based on Force-Directed Layout Algorithms
The Design of the Sensor Node of IOT Based on SIM20
The Research and Implementation of Geospatial Data Management Based on ArcGIS Service
Building Bridges among Local Area Networks
Analysis on Internet Attack and Security
Objects Collision Detection in Virtual Scene
Research of Digital Watermarking Algorithm Based on DCT Transform
Weapon-Target Assignment Problem in the Warship Fleet Based on Fast and Elitist Non-Dominated Sorting Genetic Algorithm
Early-Warning Model for Tourism Environment Carrying Capacity in Scenic Spots Based on Fuzzy Inference
Simulation and Analysis of AUV's Hydrodynamics when Moving in the Near-Seabed
Research of Digital Simulating Model of Assembling Shunt Capacitor
A B/S-Based Multi-Server Framework for Knowledge Component Implementation
Numerical Simulation on the Stress and Strain of Lining Structure with Double Shield Tunneling Construction
A Collaborative Filtering Recommendation Method Based on Item Category
The Vestibular System Modeling in the Head and Eye Movement Research
Design and Implementation of Module Hot-Plugging in Equipment Management Platform
A Quantum-Behaved Particle Swarm Algorithm Combined with Chaotic Mutation
The Design and Development of Learning Log Management System for C Language Web Classroom
Study on Custom Service Combination Based on BPEL
Applying RBF Neural Networks and Genetic Algorithms to Nonlinear System Optimization
Flow and Density Difference Lattice Model and its Numerical Simulations Analysis
Study on Network Emergency Evaluation with Web-Based Information
An Intelligent Method Optimizing BP Neural Network Model
Error Resilience Scheme for Real-Time Video
A Framework for Filtrating Software Measures in Software Measurement Process
Research and Implementation on XML-Based Data Exchange Platform
The Research and Application of Sorting Algorithm in Aircraft Scheduling Problem
Random Choice of Logistics Distribution Route Based on Dynamic Programming
Research on Particle Swarm Optimization for Protein Structure Prediction
On the Construction of Safety Running and Management Systems for Chinese E-Government System
Numerical Simulation of Overpressure about Muzzle Blast Flowfield
Application of Visualization and GIS Techniques in Water Conservancy Works
Efficient Front-End Cache for XEN Virtual Block Device
Development of Information Management System Used in Laboratory
Intelligent Voice Terminal with Image Retrieval Function
Information Service: Podcast Course Video-Sharing System, for Example
Application of Red Spider Software in Multimedia Network Classroom
E-Commerce Model Research Based on Cloud Service
Slicing Objects Using UML State Diagram
Traffic Status Prediction and Analysis Based on Mining Frequent Subgraph Patterns
Architecture Design of Urban Intelligent Transportation Using Cloud Computing
The Application Research of Private Cloud in the Data Centers Colleges of Universities
The Research and Application in Intelligent Document Retrieval Based on Text Quantification and Subject Mapping
Research on Evaluation Index System of Multimedia Teaching Software
Trust Federation of Identity Management in Distributed Environment
Study on Teaching Method of Project in the Operating System
Study on the Software Trustworthiness Measurement Algorithm Based on the Grey Relational Analysis
Information Hiding of MS-Office Compound Document
「Nielsen BookData」 より
