Applied mechanics and materials I : selected, peer reviewed papers from the 2012 International Conference on Applied Mechanics and Materials (ICAMM 2012), November 24-25, 2012, Sanya, China

著者

• International Conference on Applied Mechanics and Materials
• Li, Guangfan
• Chen, Chaohe

書誌事項

Applied mechanics and materials I : selected, peer reviewed papers from the 2012 International Conference on Applied Mechanics and Materials (ICAMM 2012), November 24-25, 2012, Sanya, China

edited by Guangfan Li and Chaohe Chen

（Applied mechanics and materials, v. 275-277）

Trans Tech Publications, c2013

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The collection of peer reviewed papers covers all aspects of mechanics and materials: theoretical, experimental, and computational. Specific topics of interest include: mechanics of materials, rock and soil mechanics, fluid and heat mechanics, machine parts and mechanisms, composites, micro/nano materials, steel and alloys, and building materials and other related topics.

目次

Preface and Conference Organization Theoretical and Applied Mechanics Chapter 1: Mechanics of Materials The Numerical Study on Errors of Stress in Anisotropic Linear Elastic Material when Simplified as Orthogonal one Based on the Numerical Simulation of Random Aggregate Concrete Model of the Penetration of the Two Material Models Singularity Analysis for Plane Tri-Material Junctions Description of Large Deformation Problem Using Means of Visual Strain Biomechanical Study on the Influence of Shaping Amplitude on Material Strenght of Titanium Implant Comparison of Two Hyperelastic Models for Carbon Black Filled Rubber Small Scale Effect on Boundary Conditions of Cantilever Single Carbon Nanotubes Impact Energy Calculated by a Plastic Material Deformation Finite Element Mechanical Analysis of Cushion Seals in High Speed Pneumatic Cylinder Influence of Rolling Bearing Steel Ball Temperature Deformation on Radial Clearance Mechanical Model and Finite-Element Simulation Analysis of Hemp Stalk Stress Analysis of Transmission System and Blade for Offshore Wind Power Generator Finite Element Analysis of Thermal Residual Stress in Unidirectional Fiber Reinforced Composite Experimental Results and Model of Stress-Field-Induced Strain in NiMnGa Single Crystal The Influence of Void Orientation on Stress and Strain Fields for Nickel-Based Single Crystal Superalloys under Creep Loading The Research on the Key Factor Affect the Precision in Stress Analysis for the Rotor of Steam Turbine The Thermal Stress of a Domestic 300MW Steam Turbo Unit during its Startup and Shutdown Aeroelasticity Analysis of Rotor Using Dynamics of Multibody Systems General Solutions of Plane Problem in One-Dimensional Hexagonal Quasicrystals Structural Strength Analysis of FRP Yacht by FEM Experimental and Finite Element Based Investigations of In-Plane and Out-of-Plane Properties of Aluminum Honeycomb A Study of the Relationship between Fabric Property and Clothing Pressure of Knitted Underwear A New Method to Estimate the Projection Angles of Fragments from a D Shape Configuration Quick Drawing of Internal Forces Diagram of Beam Cyclic Bending Response of Single- and Polycrystalline Thin Films: Two Dimensional Discrete Dislocation Dynamics An Unstructured Moving Grid Scheme for Shock Impacting on Material Interface Thermal Shock Behavior of a Functionally Graded Material Plate with a Crack Mixed-Mode I/II Crack Extension in Thin Sheet Metal An Interaction Energy Integral Method for an Interface Crack in Two Nonhomogeneous Plates under Thermal Loading The Research on the Method of Simulating Crack Size Based on Reducing Local Structural Stiffness Analysis of the Crack Propagation Based on Extended Finite Method Bending Fatigue Life Prediction of Fillet Rolled Crankshafts Ultra-Long Life Fatigue Behavior of Welded Joints with Shot Blast Treatment Conceptual Study on an Origami Patterns of Type I Tapered Square Tub with and without a Crack Calculation of Fatigue Crack Initiation Life by Coupled Finite Element Method Study on Effect of Cycle Counting Correction Factors in Spectral Based Fatigue Computation Numerical Examination of Mixed Mode Crack in SSY: A Review Numerical Estimation of Energy Release Rate of Mode I Crack by Load Displacement Procedure in LEFM and SSY Regimes: A Review The Static Stress Intensity Factor around the Anti-Plane Crack in an Orthotropic Functionally Graded Material Fatigue Crack Propagation Prediction under Single Overload Variable Loading Experimental Study of the Influence on the Residual Fatigue Life of 45 # Steel Fatigue Damage Specimens An Experimental and Numerical Hybrid Technique for Analysis the Fracture Behaviors in Natural Fiber Reinforced Composites Study on Broken Wire Impact and Safety Degree Evaluation Calculation Model Study on Damaging Stress of Hydraulically Created Fracture Propagation Estimation of K in Ductile CT and SENB Specimens under LEFM and SSY Regimes by J Integral Method: A Review Natural Frequency Spectra of Cracked Beams for Dynamic Property Characterization Chapter 2: Rock and Soil Mechanics Simulation and Analysis on Slope Cutting Reinforcement Scheme of Lishigou Tunnel Sensitivity Analysis of the Influences of Rock Mechanical Parameters on the Deformation of Underground Caverns Research and Analysis of Active Earth Pressure on Retaining Walls with Layered Non-Cohesive Backfills Primary Physical-Mechanical Characteristics on Marine Sediments from Zhoushan Seas in Sino Mainland Numerical Simulation and Laboratory Experiments of Hydraulic Fracturing of Highly Deviated Well Measurement and the Distribution Law of In Situ Stresses of Tingnan Coal Mine A New Method to Estimate Rock Mechanics Composed both the Dynamic and Static Test Means Research on Deformation Stability of Soft Rock Slope under Excavation Based on FLAC3D Study of Variation of Soil Stress State Based on the Curve of Normalized Strain- Pore Water Pressure Experiment and Analysis on Rheology Dynamic Characteristics of Soft Soil Effect of Permeability Coefficient of Reservoir Bank Slope on Pile Displacement and Ground Deformation Experimental Study on Gravel Soils of Matrix Suction Experimental Techniques for Mechanical Properties of Gas Hydrate-Bearing Sediments The Geochemistry Research on Eocene Volcanic Rocks in Sanshui Basin Experimental Study on the In Situ Mechanical Properties of Methane Hydrate-Bearing Sediments The Stress Calculation of Refracturing Based on Damage Theory The Principle of Effective Stress Theory Research Based on Channel Rate Density Calculation of Saturated Cohesive Soil under Different States in Ningbo Area Strength Criteria of Jointed Rock Mass in Unloading Area The Stress Formula of Soil under Vertical Line Load Site Investigation of a Loess Slope for a Field Irrigation Test Study on Boundary Depth and Critical Shear Wave Velocity of Saturated Loess Foundation Liquefaction in Different Regions Numerical Simulation of Land Subsidence in Hangu-Tianjin Analysis of Displacement and Deformation Caused by Underground Mining in one Coal Mine of China Research on Brittleness and its Definition of Mudstone Micro-Study of Soil's Inherent Anisotropy with PFC Simulation Experimental Research on Compression Characteristics of Compacted Loess Chapter 3: Fluid and Heat Mechanics Fluid-Structure Interaction Modeling by ALE and SPH Effect of -Cyclodextrin on the Water Loss and Hardness of Frying Chestnut during Storage Numerical Simulation of Unsteady Flow around Ahmed Body with Active Flow Control An Experimental and Numerical Study of Pressure Drop and Hydraulic Behavior in Scaled-Down Fuel Bundle A Multi-Scale and Level Set Algorithm for the Inverse Problem of Wave Equation Evaluation on the Application of Two-Fluid Multiphase Model to Supercavity The Analysis on the Starting Friction Torque Increase of Magnetic Fluid Revolving Sealing Design Methodology and Unsteady Aerodynamic Characteristics of a Rectangular Variable Geometry Hypersonic Inlet Numerical Study of the Influence of Waving Bottom on the Fluid Surface Wave Low-Diffusion Preconditioning Roe's Scheme on Simulation of Low-Speed Flows Low Speed Preconditioning Algorithm Used in the Process of Calculating Euler Equation The Method of Dynamic Reserves Prediction for a Constant Volume Gas Reservoir Non-Newtonian Fluid Flow and Heat Transfer in Microchannels Effects of Unforced Bounday Layer Transition on the Performance of a Two-Dimensional Hypersonic Inlet Lattice Boltzmann Simulation of Effect of Rolling Manipulation of Traditional Chinese Massage on Blood Flow Ghost Cell Immersed Boundary Method for Simulating Flow over Two Circular Cylinders in Tandem Arrangement Numerical Investigation of Vortex Shedding Modes of Flow past Two Circular Cylinders in Side-by-Side Using Immersed Boundary Method Comparative Study of Synthetic Jet Numerical Simulation Methods Analysis of the Modeling of Single-Phase Flow in a Perforated Pipe with Wall Fluid Influx An Easy Calculation Method on Sweep Efficiency of Chemical Flooding Numerical Simulation of Underwater Ellipsoid Motion near Free Surface A Two-Phase Hydrodynamic Model for Transport Pipelines in Vacuum Sewer Systems Flight Dynamics Modeling and Analysis of Flexible Hypersonic Flight Vehicles The Zero-Mach Limit of Compressible Euler Equations Linear Instability Analysis of Confined Compressible Boundary/Mixing Layers Flow Research on Internal-Mixing Nozzle for the Icing Environment Simulation Equilibrium Characteristics of High-Speed Train in Crosswind Singular Cell Adaptive Method for Adaptively Refined Cartesian Grid in the Simulation of Flow around Airfoil Numerical Simulation Research of Aerosol Cooling Finite Element Analysis of Airflow Field for Vacuum Chamber in Air-Suction Seed Metering Device of No-Till Seeder The Study of Deepwater Drilling Parameters Optimization Numerical Simulation of Double Inlet Cylinder Cyclone Using CFD Extrusion Uniformity Optimization for Shaping Channel Design in Large-Scale Die-Plate of Underwater Pelletizing Design for Wind Tunnel Testing of Scaled Model by CFD Method Numerical Analysis of Heat Transfer in the Concentric Heat Exchanger A Study on Elliptical Gas Flow in Double Porosity Gas Reservoirs Design of the Wind Channel for the Test-Bed of Aerodynamic Brake Stability Parameter H of the Flow of Power-Law Fluid in Annulus with the Inner Cylinder Executing a Planetary Motion The Fluid-Solid Coupling Seepage Mathematical Model of Shale Gas Research on Aerodynamic Characteristics of a Simplified SUV Model An Investigation of a Novel Parallel Computation Scheme Designed for a Simulation of Amino-Acid Leaking Problem inside -Al2O3 Nano-Channels Numerical Modeling of Wave Propagation in Poroelastic Media with a Staggered-Grid Finite-Difference Method Numerical Simulation of the Micromixing Induced by Ultrasonic Vibration of Sidewall-Trapped Microbubbles Numerical and Experimental Simulation on Aerodynamic Character of Crescent-Shaped Iced Conductor Numerical Simulation on the Dynamics for the Ultrasonic Cavitation Bubble in Chitosan Solution Research on the Coarse Particles Velocity Characteristic in Fluidized Bed Numerical Simulation of Coupling Heat Transfer in Sealed Airborne Electronic Equipments Electrokinetic Flow and Measure Method in Microfluidic Study on Optimization of Evaporative Condenser Nozzle with CFD Method Study of Inert Current System Designed for Pressure Control of Micro-Positive Pressure Distillation CFD Research and Investigation of 2011 P4/5 Competition Rear Wing Effect of Continuous Arterial Blood Flow of Intra-Aorta Pump on the Aorta - A Computational Study Taylor Series Numerical Method in Transient Heat Conduction Analysis Numerical Analysis of Aerodynamic Noise of a New High-Speed Train Effect of Latent Heat on Insulation Characteristics in Phase Change Roof Chapter 4: Machine Parts and Mechanisms Wrapping Angle Compensation Model of Cold Rolling Strip Shape Signal The Study on Detonation Front Shape of a Charge Shot by High-Speed Photography Dimension Analysis of Dynamic Response of Cylinder Shell under Impact The Composite Control for Single-Link Flexible Manipulator Using Dynamic Sliding Mode and Optimal Based on Dynamic Switching Comparative Study on Rigid-Flexible Model of Oblique Impact between Cylinder and Ground Tolerance Ring Design in the Actuator Arm of a Hard Disk Drive Using Finite Element Analysis Stress and Strain Analysis of SRM Based on Monitored Shipboard Service Environment Research on Failure Trend of Lifter on Basis of Static Strength Analysis An Examination of Blade Load Calculations Based on Rigid-Flexible Coupling Model Penetration of Aluminum Targets by Ogive-Nosed Projectiles at Oblique Angles Research on Vehicle Lifting Jack Structure Failure Trend on Basis of Static Strength Analysis Discuss about Linear System Transfer Function and Optical Transfer Function Empirical Approaches to Calculate External Blast Load on Structures The Double Pendulum Model and Nonlinear Dynamic Characteristics of the Pantograph of High-Speed Train Study and Design of Double Shear Regional Magnetic Rheometer Optimal Spacecraft Attitude Maneuvers via Adjoint Method Study on the Damage of Earth Penetrator's Charge Weight and Depth of the Burst Point to the Runway Founded and Explore of the Multiple Primary Structure of Force Method Impact Response of Circular Tube with Concentric Plunger Mechanical Design for a Power Wheelchair with Self-Actuated Seating Functions Based on Ergonomics Optimization Research on the Geometrical Parameters of PDC Core Bits Based on ANSYS Strength Calculation of Cubic Hinge Sleeve Based on Ansys Simulation Analysis of Stiffness of Automotive Joint Research of Ultrasonic Oblique Incidence for Testing Bonding Strength Weakening in SRM Analysis and Circuit Simulation of New Five Terms Chaotic System The Green'S Function Solution of Right-Angle Plane Including a Semi-Cylindrical Canyon Based on the Improved Homotopy Perturbation Method for Solving Nonlinear Equations Chapter 5: Vibration Oscillation of Neural Type Nonlinear Impulsive Hyperbolic Equations with Several Delays Oscillation of Nonlinear Impulsive Hyperbolic Equations of Neutral Type Research on the Dynamic Response of Floating Foundation of a Tri-Floater Offshore Wind Turbine A Method for Improving Envelope Spectrum Symptom of Fault Rolling Bearing Based on the Auto-Correlation Acceleration Signal Reducing Vibration with Advanced Lubricants for Mechanical System Solutions of a Dynamics Nonlinear In-Plane Vibration of Suspended Cable Investigated by the Mixed Averaging Method Coupling Analysis for a Submerged Ring-Stiffened Cylindrical Shell Treated with Active Constrained Layer Damping Frequency and Amplitude Dependent Dynamic Model of Rotor Elastomeric Damper with Refined Nonlinear Stiffness Research of Vibration Control Method on Turbine Bent Rotor Response of Ultra Precision Machine under Micro Environment Vibration Study on Frequency Tuning of Parallel Mechanism for Reducing Vibration Reseach Progess of Microperforated Panel Absorber Online Adaptive Fuzzy Neural Identification of a Piezoelectric Tube Actuator System Vibration of a Tube with the Axial Loads and Fluid Shaft Instabilities in Two-Stage Gear Systems Research on Dynamic Transfer Performance of High-Speed Wheel Set Homoclinic Tangencies for a Rotor-Active Magnetic Bearings System Chapter 6: Industrial and Civil Engineering Experimental Research on Hysteretic Behavior of L-Shaped Columns with HRB500 Reinforcement Numerical Analysis of Bearing Capacity to Q690 Tubular Joints Enhanced by Inner Annular Plate The Static Analysis about Complicated-Welded on Tubular Rectangle-Joints Study of Shear Deformation's Influence on Deflection of Continuous Composite Box-Girder Bridge with Corrugated Steel Webs FRP Truss Bridge Construction Technology Research and Application Dynamic Response Analysis for Space Grid Structure with Different Boundary Conditions Research on Large-Scale Structure Analysis Considering Time Effect and Route Effect (I): Theory Study on Dynamic Response Test of Long Span PC Girder Bridge under the Operating Conditions Unit Type Curtain Wall Mullions to Strengthen the Design and Structure Calculations The Discussion and Analysis of Light Steel Residential Envelope Structure Energy-Saving Materials Analysis Floor Failure Characteristics of 7122 Working Face in the Qinan Coal Mine Based on the Plasticity Theory Seismic Analysis of Fly Ash Plate Sandwich Polyurethane Insulation Composite Wall Chapter 6: Industrial and Civil Engineering Static Fatigue Experimental Research on Orthotropic Deck with Composite Pavement Layer Analysis on Dynamic Failure of Steel Cable-Stayed Double-Layer Grids under Strong Earthquake Nonlinear Dynamic Analysis Model for RC Shear Wall Numerical Analysis of Fire Behavior of Reinforced Concrete Frame Structure Stress Impact Analysis of Steel Frame with Different Beam-Column Connection Mode Shaking Table Test on Seismic Response of Isolated Bridge The Elastic-Plastic Analysis of Functionally Graded Plate Restoring Force Models Investigation of Research Status and Problems Analysis of RC Structure Experimental Research on Static Behavior of Stiffened Square Concrete-Filled Steel Tubular Columns Subjected to Axial Load Application of Prestressing Technology for Strengthening Space Grid Structure The Detection, Identification and Structural Analysis of the Steel Structure Engineering Stress Performance Theory and Experimental Comparison Analysis on Spatial Steel Pipe Truss Roof Study on Internal Force Redistribution Caused by Uneven Settlement of Frame Structure Force Cold-Formed Steel Residential System Performance Analysis Dynamic Load Test Analysis for Continuous Steel Bridge An Adjusting Method for the Suspender Force of Continuous Beam Arch Combination Bridge Based on Influence Matrix Experimental Study of CFRP Confined RC Rectangular Hollow Section Bridge Piers The Forecast Model to Carbonation Depth of Prestressed Track Beam of Light Rail Second-Order Effects of Shanxi Tall Steel Framework Sway Comparative Experiment Research on Mechanical Performance between Sintered Hollow Block Infilled Insulation Masonry and Sintered Perforated Brick Masonry under Vertical and Horizontal Load Research on Horizontal Displacement and Torsion Coupling Effect of Structure-Soil System Damage Detection in Beam-Type Structures Using Fractal Dimension Trajectory of Rotated Higher Vibration Modes The Static Impact Analysis of a Blast Furnace Equipment Load on the Structure in Taiyuan Theoretical Analysis Research on Story Drift Limit for Steel Rinforced Concrete Composite Structures Mechanical Behavior of Steel Arch Bridge with Outward Inclined Ribs A Finite Element Method with Six-Node Isoparametric Element for Nonlinear Analysis of Cable Structures Monitoring and Evaluation on Girder Alignment of Suspension Bridge Based on MATLAB Research of Loop Pre-Stress Tension Test for Cable-Stayed Bridge Pylon Based on Full-Scale Sectional Model Research on Large-Scale Structure Analysis Considering Time Effect and Route Effect (II): Engineering Example Research on Calculation Formula of Retaining Wall for Structural Reliability Program Design Study on Stresses Distribution Pattern of Wide Box Steel Girder of Arch Bridge Finite Element Analysis on Orthotropic Deck with Composite Pavement Layer Study on Shear Behaviour of Concrete Beams Prestressed with External CFRP Tendons Prestress Force Effection on Natural Frequencies of Simply Supported Beams Programme Design of Precast Shear Wall Structure Seismic Performance Experiment Finite Element Analysis about Temporary Bracing of Prefabricated Column of Prefabricated Structure Lateral Stiffness Optimization in Structural Scheme Design of a Super High-Rise Building in 0.30g Seismic Fortified Regions The Numerical Simulation of Moisture Transportation in Unsaturated Concrete of Underwater Tunnel The Research for Cylinder Pressure and Penetration Method in Comprehensive Testing Mortar Strength Mechanical Performance of Timber Beams Reinforced by FRP Sheets Analysis on the Mechanical Behavior of the Pile Base of Integral Abutment Skew Bridge Nonlinear Finite Element Analysis of Adaptive-Slit Shear Walls Analytical Model on the Bond Stress-Slip Relationship between Steel Reinforcement and Concrete for RC Beam-Column Joints Triaxial Test and Numerical Analysis on the Fiber Reinforced Laterite Clay Fatigue Life Prognosis of Concrete Using Extended Grey Markov Model Super Arch Dam Seismic Generalized Damage Refinement of an Ultimate Strain Model for Circular Concrete Columns Retrofitted with FRP Based on a Most Comprehensive Test Database The Effect of Interfacial Cracks on the Concrete Chloride Diffusion Coefficient Considering Aggregate Shape The Two-Stage Design Method of Isolated Structures Based on New Code for Seismic Design of Buildings Research on Corrosion Resistance Properties of Post-Tensioned Prestress Duct Grouting Three-Dimensional Analysis of Excavating Face Stability Supported by Pipe Roof Experimental Study on Reinforcement of Failure Reinforced Concrete Beams Impact Analysis of Geogrid Node Size in Stretch Forming Study on Dynamic Failure Behaviors of Steel Doble-Layer Grids (42X42m) Supported by Circumjacent Steel Columns Used in a Gymnasium under Disaster Earthquake Action Finite Element Analysis of the Precast Shear Walls Study on the Strength Properties and Failure Mode of Recycled Sludge Lightweight Soil Anisotropy Gas Reservoir Drainage Radius and Quantitative Well Interference Study Numerical Simulation of Intra-Explosion in Multilayer Medium Research and Applications of a Plane Embedded Combined Element Model Considering Bond and Slip Effect of Random Material Parameter in the Shell Structures In Situ Test of Cohesive Strength on the Interface Zone between Mortar and Aggregate in Concrete Seismic Response Analysis on RC Frame Strengthened with Viscoelastic Damper Recent Development of Self-Centering System for Seismic Design of Bridge Piers: Experimental and Theoretical Investigation Structure Health Monitoring System of a Noval Steel-Free Cable Stayed Bridge Analysis of Nonlinear Dynamic for Piles under Earthquake Loading Cyclic Behaviour of GFRP and Lateral Ties Confined Polyolefin Fibre Reinforced Concrete under Axial Repeated Compression Q3 Loess-Like Silt Bearing Capacity of Foundation Partition Statistical Analysis in the Shanxi Yuncheng Study of Frost Resistance of 50 Years Concrete Exposed to Saline Areas Theoretic Analysis for Composite Elastic Modulus of Concrete-Filled Rectangular Steel Tube Member Numerical Analysis of Composite Soil Nailing Retaining Wall under Earthquake Finite Element Analysis of Steel-Shotcrete Composite Using the Fiber Beam-Column Element A Developed Strength Model for FRP Confined Circular Concrete Columns Based on a Most Updated and Comprehensive Test Database The Effects of the Rubber Bearing on the Seismic Performance of the Aqueduct-Water Coupling Structure Turnover Experimental Research on Anti-Slipping Performance of Steel Pipe Joints with Swivel Coupler Spillway Design for Zuocun Reservoir Danger Control and Reinforcement Project Stability Analysis of Side Slope under Normal and Rainfall Conditions Seismic Response Analysis of a Large Span Bridge with Inconsistent Inputs FLAC3D Simulation for Dynamic Response of the Western Slope in Buzhaoba under Explosion Solutions of Technical Problems in Ultra-Soft Soil Improving Projects Vertical Motion Inputs for Seismic Analysis of Large Span Bridge Effect of Ground Motion Characteristics on Seismic Response of Large Span Bridge The Experimental Research on the Bag-Grouting-Pile Composite Foundation in Coastal Soft Foundation Treatment Prediction of Residual Displacement of SDOF System from its Peak Inelastic Displacement Probabilistic Characteristics of Residual Displacements of SDOF Systems Slope Stability Analysis of Elastic Limit Equilibrium Method Stability Analysis for Slopes of Maerdang Hydropower Station with the Three-Dimensional Limit Equilibrium Method Calculation of Equivalent Damping Ratio to Concrete-Filled Steel Tubular Arch Bridge Stress-Deformation Numerical Analysis of Clay Core Rockfill Dam Based on Duncan-Chang E-B Model Analysis on the Discrimination Method of Seismic Liquefaction Frost-Heaving Pressure on Lining of Tunnel Constructed in Severe Cold Regions Study of Elastic-Plastic Sediments on Seismic Response of Concrete Dams Seismic Behavior of Two-Story Brick Masonry Building The Stability Analysis of a Slope under the Complex Conditions Simplified Method of Isolated Structure Collapse Capacity Part, (I): Ground Motion Intensity Measure A New Method of Fracture Designing to Elevate SRV in Natural Fractured Sandstone Reservoir A Mathematical Model for the Pipeline Transportation of Soft Clay Integral Anti-Slide Stability Analysis of RCC Gravity Dam Stability Analysis of High-Filling Embankment Based on Nonlinear Finite Element Method Analysis of Fissured Expansive Soil Slope Stability and its Reinforcement with Anti-Slippery Piles The Experiment of Deformation and Internal Force of Soft Pipeline Caused by Subsoil Settlement Deep Excavation Caused by the Impact of the Adjacent Buried Pipeline Destroy the Analysis Analysis of the Deformation Field in the Direct Shear Test with Use of DPDM Analysis and Research of Cement Mixing Pile in Soft Ground Taiyuan Underground Pipeline Testing and Analysis of Deformation and Failure Numerical Investigation on Passing through Goaf in Coal Mine Failurezone Research of Embankment Dam Structural Safety Spillway Design for Xiaoguo Reservoir Danger Control and Reinforcement Project Rock-Concrete Joints Reliability during Building Process of Super Dam The Seismic Analysis of an Exhibition in Shanxi Influence of Concrete Tension Softening Properties on the Steel-Liner Reinforced Concrete Penstock Coupled Numerical Simulation Research on Dewatering and Land Subsidence in Deep Foundation Pit Seismic Design and Analysis of Tall Shear Wall-Frame Structure Using Viscous Damping Wall Study on the Remediation of Mud-Pumping Study on the Supporting Method of Crossheading in Shallow-Buried Coal Seams Working Face Using FLAC Simulation Chapter 7: Other Topics Chronology Research on Eocene Trachyte in Zoumaying, Sanshui Basin The Influence Factors and Enhancement Measures of the Quality of Well Cementation in the Hai-La-Er Area The Division of Zhangjiakou Formation of Later Jurassic at Jibei A Sampling Method to an Inverse Scattering Problem for Stationary Schroedinger Equation Advanced Materials Chapter 8: Composites, Polymers and Biomaterials Analyzing Resonant Frequency of 1-3-2 Piezoelectric Composite with Multi-Mode Study on the Effect of WC Size on the Thermal Expansion Coefficient of WC/Cu Composites Semi-Geodesics-Based Dome Design for Filament Wound Composite Pressure Vessels Property Prediction of Composites with Different Fiber Volume Fractions by Representative Volume Element Method Effect of TiC Intermediate Layers on the Thermal Conductivity of Copper/Diamond Composites The Effects of Small System on the Type I Antifreeze Protein 'HPLC-6' Modified Polymer Material Used for Oxidative Desulfurization of Diesel Fuel Study of a Sound Absorbing Polyurethane Based on Porous Composite Material Study on Rheological Properties of Sodium Alginate/Polyethyleneglycol/Molecular Sieve Composite System Alginate-Based Multi-Membrane Hydrogel for Dual Drug Delivery System Synthesis and Properties of Polyimides Containing Tert-Buty Group Study on Hypolipidemic Activities of Safflower Seed Oil Numerical Study on Effects of Interphase in Natural Short Fiber Reinforced Polymer Composite Based on Cohesive Zone Model Cross Coupling Effect in Multi-Element Composites for Transducer Array Application Detection of the Intermediates in Preparation of Ammonium Polyphosphate by Temperature Raising Rate Factor Comparison of the Flame Retardant Properties of Ammonium Polyphosphates with Crystalline Forms II and V Ionic Liquid 1-Butyl-3-Methylimidazolium Chloride/FeCl3 Pretreatment of Sugarcane Residue for Second Generation Bioethanol Production Preparation of Friction Materials by Solution Mixing Based Palygorskite Nanometer/PF Composite Resin and Tribological Behavior of Four Kinds of Woven Friction Materials Wear Process and Analysis of Lubrication Failure about Sputtering MoS2 Composite Solid Films Applied to Spacecraft Acoustic Characters Study on the Influence of Micro-Fillings in Underwater Sandwich Composite Structure Effect of Cu(Cr0.2Al0.8)2O4/TiO2 Composite Film Electrodes on DSSC Photoelectric Properties Interface Parameters of Composite Materials with an Elliptical Cross-Section Fiber Bundle Predictions of the Effective Elasto-Plastic Properties and Cohesive Strength of the Spruce Fiber Reinforced Polypropylene Composite Preparation of Quercetin-Ni+2 Metal-Complexing Imprinted Polymer and its Recognition Performance Evaluation Formulation and Evaluation of Novel Starch-Based Microspheres for Adsorption of Ascorbic Acid The Properties of the Composites of Bamboo Flour and PVC Preparation of Ammonium Polyphosphate by Melamine as Sole Condensing Agent Fatigue Stiffness Degradation Behaviour of Woven Composite Joint Study on the Tensile Damage Behavior of Self-Healing 2.5D-C/SiC Composite in Weft Direction Chapter 9: Micro / Nano Materials A Novel Simplified Model Approach for Fiber Modified by 1-D Nano Techniques Synthesis of NiFe2O4 Nanoparticles and its Supercapacitive Properties Morphology Control of SAPO-11 and SAPO-47 Crystals in the Presence of Diethylamine Grafting Polymerization of D,L-Lactide on the Surface of Halloysite Nanotubes Growth and Microstructure of Submicro-Scaled Graphitic Flakes on Carbon Fibers by Catalytic Chemical Vapor Deposition Structural Evolution of Mechanically Alloyed Nanocrystalline Al70Fe25Ni5 Intermetallics Synthesis of Three-Dimensionally Interconnected Hierarchical Meso/Mesoporous Tb3+ Doped Titania with Enhanced Photocatalytic Activity Microstructures and Electrocatalytic Properties of Nitrogen Doped Graphene Synthesized by Pyrolysis of Metal Tetrapyrazinoporphyrazine Experimental Research on Mechanical Characteristics in the Process of Nanoscale Sliding Contact Synthesis and Characterization of Neodymium Zirconate Nanocrystals Doped with Aluminium Ions by a Salt-Assistant Combustion Method Morphology Transition of Diblock Copolymer with Nanoparticles Confined in Cylindrical Nanopores Dispersion of Multi-Walled Carbon Nanotubes Modified with Poly-L-Lysine in Water Preparation and Properties of Carbon Nanotubes Reinforced Cu Matrix Composites for Electronic Packaging Application Preparation and Characterization of Aligned Carbon Nanotube Fibers Fabrication of WO3 with Macroscopic Structures via CNFs Template Computational Study of Thermal Stabilities of Cu Nanorods at Atomic Scale The Electrical Potential Distribution in the Hetero Structure during the Growth of the Electrodeposition Nano The Local Defect Effect on Molecular Local Density State in Carbon Diamond Structures Effect of Ni Addition on Formation of Nanocrystalline Phase during Mechanical Alloying of (Fe Al)-40(60) at.% Ni and (Fe Al3)-10(30) at.% Ni Powders Electrochemical Synthesis of Copper Sulfide Nanostructure with PAM Hydrogel Template Ag Nanoparticle Functionalized TiO2 Nanowire Thin Film and its Gas-Sensing Application at Room Temperature Chapter 10: Steel, Alloys and Coating Effects of Stress Amplitude on Fatigue Behavior of Extruded Mg-3Al-2Sc Alloy Study on Dynamic Recrystallization Behavior in Deformed Austenite of 52100 Steel by Using JMAK-Model Atom-Rich and Defect Effects on Electronic Structure and Magnetism in Co2MnGe/MgO Heterojunction The Abnormal Deformation Behavior of B340/590 DP Steel at Elevated Temperature Influence of RE Elements on Corrosion Rust Layer of Low Carbon Steel in CSP in Simulated Coastal Atmosphere Microstructure of TC21 Titanium Alloy after Superplastic Deformation and Heat Treatment Dynamic Tensile Behaviour and Full Field Strain Measurement of High Strength Steel Property Study on High-Speed Steel Deposited TiN Coatings by Magnetron Sputter Ion Plating Experimental Study on the Forming Limit Diagram of QP980 under Variable Pressing Velocities Study of Metallurgical Properties in the Sintered Ore with Variable SiO2 Investigation on Behavior of the early Stage of Aging in C17200 Alloys Effect of Tungsten Addition on Microstructure and Mechanical Properties of TiAl-Based Alloy Analysis on Affecting Factors of Slab Surface Transversal Corner Crack for Medium-Carbon Steel with Boron in Continuous Casting Calculation of the Mg-Gd-Y Alloy Equilibrium Phase Diagram and its Verification at 450 DegreesC Study on the Critical Damage Value and Processing Map of AZ80 Magnesium Alloy Forming at Elevated Temperatures The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate Chapter 10: Steel, Alloys and Coating Mechanical Properties of WC-Co Cemented Carbide Prepared via Vacuum Sintering Preparation of Bromine Carbon Alkyd Resin Retardant Coatings for Steel Structure Optimized Wire Bonding Process on Micro-Connection Pad with Ni/CeO2 Coatings Preparation and Hydrogen Storage Kinetics of Nanocrystalline and Amorphous Mg2Ni-Type Alloys Preparation of Infrared Stealthy Coatings Chapter 11: Optical/Electronic/Magnetic Materials Investigation on the Optical Performance of Co and Al Co-Doping ZnO Films Properties of N-Doped ZnO Films by RF Magnetron Sputtering TEM Study of FePt and FePt:C/FePt Composite Double-Layered Thin Films Synthesis and Characterization of CdTe Quantum Dots Capped by N-Acetyl-L-Cysteine The Influence of Electrochemical Anodization for Porous Silicon Microcavity Fabrication Substrate Temperature Effects on the Structural and Optical Properties of TiO2-Doped ZnO Films for Organic Photovoltaic Devices Research on Accumulation PMOS Capacitors Based on Strained-Si/SiGe Material Absolute Luminous Flux and Quantum Yield of Sm3+-Doped Cadmium-Aluminum-Silicate Glasses under the Pumping of Blue Light Emitting Diode Mixed State Hamiltonian Element for Plane Transversely Isotropic Magnetoelectroelastic Solids Effect of High-K Material on Gate Threshold Voltage for Double-Gate Tunnel FET Improvement of the Absorbing Properties of Single Layer Microwave Absorbing Materials via Frequency Selective Surface Performance Study of the Anti-Scatter Grid for Sub-Megavolt X-Ray Flash Radiography Effect of Compaction on the Surface Morphology of CuInSe2 Thin Films Thermodynamic Properties and Optimized Fiber-Drawing Condition in Germanium Tellurite Glasses The Study on Surface Morphology and Residual Stress of Al2O3 Film Synthesis and Surface Photoelectric Properties of a Trinuclear Chromium(III) Complex Hydrothermal Preparation of Flower-Like CuS Superstructure and its Optical Property Investigation on the Properties of Sb-Doped CdTe Thin Films Characterization of Defects in Gallium Nitride Thin Films by SEM Chapter 12: Building Materials Study on Anti-Sliding Performance of Asphalt Pavement with Mafilon Thaw Material Experimental Research of Foaming Concrete Performance with Different Blowing Agent Experimental Research of Foaming Concrete Performance with Different Fly Ash Low Strength Self Compacting Concrete Compressive Strength Test Short-Term Ageing Influence on the Creep and Recovery Characteristics of Asphalt Binders Experimental Study on Work Performance of Waste Rubber Concrete Experimental Study on Frost-Resistance Property of Waste Rubber Aggregate Concrete Research on Thermal Performance of the Wall Systems of Steel Public Buildings Compressive Strength and Flexural Properties of High Performance Nano-Binder Cementitious Composites Fully Graded Concrete Creep Models and Parameters Pore Characteristics of Pavement Concrete with Nano-Particles Experimental Study on Expansive Concrete Filled Steel Tube Hydration Activity of Silica Fume and its Effect on the Structure of C-S-H Gel Damage of Cement Paste in Sulfate Environment with Different Temperature and Drying-Immersion Cycles Experiment Research on Plastic Strength of Grouting Materials of Desulfurization Denitration Ash Effects of Warm Mix Asphalt (WMA) Additives on the Properties of WMA Mixtures Study on Heat Conductivity Coefficient Value of Thick-Typed Fireproofing Coating for Tunnel at Elevated Temperature Research on Barite Concrete Mixed with Fly Ash Numerical Analysis for Drying Creep Behavior of Self-Compacting Concrete Application of Cement Stabilized Blast Furnace Slag Material in Road Base Project Effect of Slate Powder on Alkali Activity of Slate Aggregate Analysis of Phosphogypsum's Physical and Chemical Properties and Making of Anhydrite Cement from Phosphogypsum Effect of Initial Curing Conditions on Thaumasite Form of Sulfate Attack of Cement Based Materials Chapter 13: Material Processing Technology Analysis of Fused Magnesia Production Process with 3000kVA Electric Arc Furnace Effect of Different Heat Treatments on Microstructure and Mechanical Properties of Steel Containing Ni of 9% Base and Weld Metals Finite Element Analysis of Wear in Piercing The Viscosity Model of Ti-6Al-4V Feedstocks in Metal Powder Injection Molding Analysis of the Influence of Bar-Defects to Warping of PMMA Products Effect of Extrusion Size on Forming Process in Equal Channel Angular Pressing Effect of Isothermal Forging on Microstructure and Mechanical Properties of TiAl-Based Alloys Moisture Absorption Finishing of Polyester Fabric Periodic Nano-Structure Formation with Femtosecond Laser Ablation and Patterning of Silicon The Analysis of Ceramic Cutting Tools Durability in Machining Process of Steel C60 Applied According to Standard ISO 3685 Establishment of Constitutive Equation of Tube in Hydroforming The New Technical Research on Joining Veneer Combining Recovering Iron with Activating the Residual Slag Process for Electric Arc Furnace (EAF) Slag Mold Temperature Influence on Tensile Strength and Fiber Orientation of Plastic Parts in Dynamic Mold Temperature Injection Technology 3D Coupled Thermo-Mechanical FE Analysis of Surface Defects in Continuously Casting Slab Fabrication of Ni-Base ODS Alloys via Reactive Ball Milling The Influence of Inorganic Carbon on Anaerobic Ammonia Oxidation New Experimental Expression of Durability Dependence for Ceramic Cutting Tool A Study of Stabilization and Recycling for Aluminum Dross Parametric Study of Swage Ball for Hard Disk Drive Swaging Process Using Finite Element Method Study on Length of Cartridge how to Affects Cutting Capability of the Combustion Cutting Ammunition Process Improvement of Camshaft of Heavy Duty Diesel Engine The Deposition Methods of CsI and Ni Tubes in the AAO Template Thermodynamic Analysis of the Shock Compaction of W/Cu Granular Mixture Based on the Mesoscale Simulation Study on Promotion of Surfactant on Gas Hydrate Formation Nanowelding Technology Study Based on Simulation Methods Research on Oxygen Embrittlement Phenomenon of Interface of Titanium/Steel Explosive Welding Laminates Analysis for Force in a New Method of Lapping Brake Pump Master Cylinder Analysis of Wire-Line Coring Hydro-Hammer Technologies in Xiaoqinling Gold Ore Deposit Experimental Investigation on Hybrid Technology of Ultrasonic Vibration Assisted Chemo-Mechanical Grinding (CMG) Silicon Wafer Drilling Technologies of Golden Ore District at Victoria Lake in Tanzania The Process of Sol-Gel Method Prepared Bi-2212 Superconductors Tapes Thermodynamics and Phase Constituents of Laser Induced In-Situ-Fabrication of TiB2 Ceramic Coating on Ti-6Al-4V Research Progress of the Methods of Acid Mist Suppression Direct Preparation of Tantalum Metal from Ta2O5 Study on the Influence of Ultrasound Impacting to the Properties of 16 Mn Welded Joints The Influence of Oxide-Salt Ratio on Crystallization of Lu2Ti2O7 Phase from Molten Salt Research of Machining Error Causes and Solutions Biodegradation of Styrene Vapor in a Biofilter Copper Absorption by Glass Derived Hydroxyapatite Scaffolds Prepared by Dipping with Polymer Foam Facile Synthesis of Dye Waste-Calcium Fluoride Hybrid Absorbent and Application to Dye Wastewater Treatment The Research of the Green Buffer Packaging Materials for the Small Pieces of Express Items Recognition of Coal and Gangue Based on X-Ray Chapter 14: Other Topics in Materials Science Effects on Morphology Change on the Mg-Doped Zinc-Oxide Surface Measured by Changing the AFM Feedback Speed First Principle Study of Hydrogen Storage A Mn(II) Metal-Organic Framework Constructed from a Tetrahedral Silicon-Cored Ligand Review of Materials for Energy Saving Technology LiFePO4/Li Batteries with Mixtures of Carbonate and Ionic Liquid [EMIM]+[TFSI]- as High Properties and Safety Electrolyte A RC Model for Facilitated Transport in Asymmetric Membranes with Fixed Site Carriers The Effects of Electrolyte on the Aluminum Laminate Foil and the Lithium Ion Battery Corrosion Oxygen Permeability of Ba0.5Sr0.5Co0.8Fe0.2O5+ Membrane after Surface Modification Synthesis and Spectroscopic Properties of Novel Chiral Amino Acid Tailed Porphyrins Catalytic Oxidation of Toluene over Metal Oxides Supported on Fiber Material Analysis of Trace Elements in Roughage by ICP-AES The Fundamental Characteristics on Particle Size Distribution of Drilling Rock-Cuttings Other Related Fields of Engineering Science Chapter 15: General Mechanical Engineering A Study on Optimum Calculation of Partial Transmission Ratios of Coupled Planetary Gear Sets Ship Form Optimization of 62-Feet Yacht and Analysis of Performance Feasibility Analysis of Application of Low-Temperature Radiation Electric Heating System Analysis on Dynamic Piezoelectric Coupling Characteristics of PZT-4 Improved Plastic-Al Pipe Based System for Refrigeration of Energy Existed in Urban Sewage Optimal Design of Highway Piezoelectric Generators Hardware-in-the-Loop Simulation Research on Driving System of Hybrid Electric Motorcycle Dynamic Modeling and Simulation of the Basic Shaft Bearingless Motors Prediction Model of Centrifugal Fan Performance Based on BP Neural Network Research on Wire-Plugging Robot System Based on Machine Vision Modeling and Simulation Analysis of Certain Vehicular Gatling Gun Digitalized Design of Upward-and-Downward Adjusting Mechanism of Automobile Seat Flue Gas Turbine Fault Analysis and Improvement Measures A New Memristor Based Chaotic System Study of the Hydraulic Synchronous Circuit and Synchronous Control of the Hydraulic Hoist The Study of LED Lighting Color Temperature and Visual Effect Chapter 16: Control and Information. Computer in Engineering Research and Design The Application of RFID in Cigarette Warehouse Logistics Based on the Ant Colony Algorithm TSP Optimization Simulation With Random Parametric Equation of Circle Inscribed Polygon Generation Algorithm and Analysis Introduction of Quantum Cryptography Study on Quantum Key Distribution Research of Provincial Forest Fire Emergency Resource Management Platform Four Band Cardinal Orthogonal Scaling Functions and Wavelets in Higher Dimensions Laser Profile Scanner Application for Micro Part Detection An Improved FOCUSS Algorithm in the Presence of Noise Point Cloud Process of Laser Scanning with a Mathematical Noise Model Research on an Automatic Measurement System in Wheelset Parameters Cast Shadow Removal in a Real-Time Environment Verification Mechanism for Online Responses in Criteria Prioritization Research on Intelligent Flowmeter Calibration Software System Design Master-Slave Global Synchronization for Froude Pendulums via Linear State Error Feedback Control Review on Certain Group Planning Domain of IPC A GA Approach for Damage Localization Using Scattered Lamb Wave MPI+OpenMP Hybrid Parallel Algorithm Performance Research on Two-Dimensional Compressible Flow Field Simulation A Hybrid Optimization Based on GPU Parallel Computing Method and its Application of Three Dimensional Large Eddy Simulations Research of Ontology Based FPBS Design Model Existence and Stability of Periodic Solution for Impulsive Hopfield Cellular Neural Networks with Distributed Delays Determining Side-Cores of Plastic Moldings The Analysis and Improvement of Inverse Problem Simulated Annealing Algorithm about Concrete Temperature Field Discussion of the Construction Design Methodology Considering both Evolutionary Structural Optimization and 3D Printing Technology A Neural Network Model for Evaluating Gravel Liquefaction Using Dynamic Penetration Test Three-Dimensional Modeling of Open-Pit Based on AutoCAD and its Application Using Interpolation Points to Rectify Cutter Paths of Five-Axis Machining Automatic Side-Cores Construction in Injection Plastic Mold Design for Free-Form NURBS Surface Models Starting Energy Dissipation of Traffic Flow with On-Ramp Robust Quantized Guaranteed Cost Control Research on Minimum-Cost-Based Task Decomposition Model of Multiple Expert Systems for Oil-Gas Reservoir Protection Based on Agent Adaptive Consensus of High Order Multi-Agent Systems with Unknown Nonlinear Dynamics 1D and 2D Coupled Numerical Model for Flood Control in Middle Reach of Huaihe River Symmetric Multiwavelet Frames with General Composite Dilation in Higher Dimensions Three Remodeling of the Optical Nerve Head Including Retinal Blood Vessel Based on Live Animal Experiment Equivalent Load Identification Algorithm Based on Least-squares in Frequency Domain Chapter 17: Engineering Management in Industry and Society Indicators and Methodologies of Energy Efficiency in China How Internet Channel Promotions Work Together Based on a Weakest Online Manufacturer? From the Dual Markets Capacity Optimization Perspective Research on Low-Carbon Development of Energy Mix in Shaanxi Province Based on System Dynamics Study and Identify on the Best Reserve Quota of Maintenance Spares Reflection of the Teaching Reform of Environmental Art Design The Study on Integration of Supply Chain Based on the Symbiosis Theory The Study of Supply Chain's Symbiotic Relationship Based on CPFR - In Case of Food Industry Fuzzy AHP Applying in the Material Management of Construction Project A Worldwide Comparison of Water Use Efficiency of Crop Production Tourism in China: A Study of its Impact on Economy, Culture and Society Relief Effort and Reconstruction after Wenchuan Ms8.0 Earthquake Study on Discriminant Criterion of Highway Landslide Disaster Failure Reasons and Support Countermeasure of Intersecting Roadwayss in Deep Soft Rock The Urban Sprawl and Urban Planning in Haikou Study of the Construction Plan Bid Assessment Method of the Coal Mine Project Based on Entropy-Weight Method Study on Water Resource Protection and Pollution Prevention of Mining Area Impact of Residential Real Estate Development on Green Construction The Planning and Design of the Modern Residential Area from Green Building Perspective: Taking Chengxi Project of Taiyuan as an Example Comprehensive Treatment for Shallow-Buried Mined-Out Area in Coal-Mining Region of Western China Study on the Criterion of Discriminant on Highway Collapse Disaster in Mountain Area Ecological Design Strategies of Vernacular Architecture in Shanxi, China Regional Evaluation of the Transportation Infrastructure Construction Level in China Coal in China Efficiency Comparison in Chinese Construction Industry Based on Data Envelopment Analysis and Super Efficiency Data Envelopment Analysis On Interior Greening Decoration of Residence Research on Geological Tourism Resources of Lingchuan-Wangmangling National Geopark Seismic Damage Investigation on Buildings of Qingchuan County in Wenchuan Earthquake Research on Fairway Condition for Safety Navigation in Bridge Waters Analysis of China's Inland Navigation Standards Analysis on Navigation Reliability of Curved Channel Analysis of the Surface Soil EC Dynamics and the Economic Benefit under the Subsurface Drainage System

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB1305148X
• ISBN:
  • 9783037855911
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v. (2857 p.)
• 大きさ: 24 cm
• 親書誌ID:
  • BA88918107