Energy and power technology : selected, peer reviewed papers from the 2013 International Conference on Advances in Energy and Environmental Science (ICAEES 2013), July 30-31, 2013, Guangzhou, China
Author(s)
Bibliographic Information
Energy and power technology : selected, peer reviewed papers from the 2013 International Conference on Advances in Energy and Environmental Science (ICAEES 2013), July 30-31, 2013, Guangzhou, China
（Advanced materials research, v. 805-806）
Trans Tech Publications, c2013
- : set
- Part 1
- Part 2
Available at / 1 libraries
-
Tokyo Institute of Technology Ookayama Library
Part 1A25118/805-1400063044,
Part 2A25118/805-2400063052 -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Other editors: Hongbing Ji, Shengzhou Chen, Xiaoguo Liu and Qingzhu Zeng
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Energy and environment have become the central theme in several fields of research and in various policy arenas. The collection of selected, peer reviewed papers from the 2013 International Conference on Advances in Energy and Environmental Science (ICAEES 2013), July 30-31, 2013, Guangzhou, China.
The 367 papers are grouped as follows:
Chapter 1: Development and Utilization of Solar Energy;
Chapter 2: Development and Utilization of Biomass Energy;
Chapter 3: Development and Utilization of Wind Energy;
Chapter 4: Geothermal Energy, Fuel Cell, Energy-saving Technology and Storage Technology;
Chapter 5: Power System and Automation;
Chapter 6: High Voltage and Insulation Technology;
Chapter 7: Power Electronics and Power Drives, Power Equipment;
Chapter 8: Smart Grid Technologies and Power System Management;
Chapter 9: Energy Chemical Engineering and Energy Materials;
Chapter 10: Energy Security, Management and Clean Use;
Chapter 11: Architecture, Construction Technology and Energy-saving Technology;
Chapter 12: New Energy Vehicles, Electric Vehicles;
Chapter 13: Machinery and Equipment for Industrial Manufacture;
Chapter 14: Modeling, Computational Technologies and Control in Industry.
Table of Contents
Preface and Conference Organization
Chapter 1: Development and Utilization of Solar Energy
Efficiency Organic/Inorganic Composite Thin Film Solar Cells
Study on Solar Photovoltaic Industry Chain Vertical Integration Investment Decisions
Economic Analysis of Solar Trough, Tower and Dish Power Plants
Thermal Character and Generating Capacity Analysis of Solar Linear Fresnel Thermal Power Plant
Application of Improved Moment Invariants and SVM in the Recognition of Solar Cell Debris
Research on Testing Method of PV Inverter Flicker Based on IEC Standards
EMI Noise Testing and Diagnosis for PV Inverter
Substrate with Si Nanoparticles Prepared by Low Pressure Chemical Vapor Deposition for Application in Si Solar Cells
Test Analysis on the Electromagnetic Environment of Photovoltaic Power Transmission System
An Improved P&O MPPT Method for Photovoltaic Power System
Operation Mode Analysis of Joint Heating about Solar Collectors and Ground Source Heat Pump
Power Characteristics of Photovoltaic Modules of Solar-Powered Airplanes Including Thermal Effects
Effects of Multi-Walled Carbon Nanotubes on Enhancing the Thermodynamics Characteristic of Alkali Nitrate and Chlorate Salt for Concentration Solar Plants
A Novel Voltage Sag Generator for Grid-Connected PV System's Low Voltage Ride-Through Test
Effect of Water Distribution Ways on the Operation of Solar Pond
Study on Resistance of Probe for Solar-Powered Irrigation Device
Research on Anti-Islanding Technology for Photovoltaic Grid-Connected Based on the Positive Power Feedback
Research on Designing Rooftop Photovoltaic Systems and Building Integration in Cold Areas
Fault Diagnosis for Building Grid-Connected Photovoltaic System Based on Analysis of Energy Loss
Influence of Oxygen Ions Bombardment on Optical Properties of MgF2 Anti-Reflection Films
The Study of Mathematical Model of the Solar Cell
Theoretical Simulation of Optical Collector for Solar Optic Fiber Lighting System Based on Rotary Parabola Mirror
Photovoltaic Power Generation Forecasting Model with Improved Support Vector Machine Regression Based on Rough Set and Similar Day
Influence of FIT Rate on the Adoption of Residential PV System in China
Photovoltaic Driven Liquid Dehumidification Air-Conditioning System
Effect of Pulsed-DC Power on the Zinc Oxide Window Layer of CIGS Solar Cells Deposited by In-Line Sputtering Methods
Preparation of Ag Nanoparticles Arrays for Silicon Solar Cells
One-Year Evaluation of a 20 MW Photovoltaic Power Station
Chapter 2: Development and Utilization of Biomass Energy
Ultrasonic Vibration-Assisted Pelleting of Cellulosic Biomass: A Review
Response Surface Method in One Step Optimization of Methyl Esterification of Tung Oil and Contrastive Analysis with Two Step Process
Biofuel Fermentation by Hyperbutanol-Producing Mutants in Sweet Corn Stalk Juice Medium
Development and Construction of a Fertilizer Rotary Dryer Using Waste Heat from an Electrical Generator in a Pig Farm
Enzyme-Catalyzed Synthesis of Microalgae-Derived Biodiesel Using a Chemically Modified Immobilized Lipase
Effect of Molten Alkali on Pyrolysis of Fatty Acid Sodium Salts to Hydrocarbon
Analytical Fast Pyrolysis of Glucose, Cellubiose and Cellulose: Comparison of the Pyrolytic Product Distribution
Effect of Biogas Slurry on Biogas Production for Anaerobic Digestion of Corn Straws
The Numerical Simulation of Combustion on Vinegar Residue in a Biomass Boiler
Experimental Study on Combustion Characteristics of Biomass and Coal Blended
Characteristics of Mixed Fermentation by Alternanthera Philoxeroides and Corn Stalk for Biogas Production
Visualization of Lipid Bodies in Chlamydomonas reinhardtii Living Cells with Fluorescent Microscopy
Effects of Nickel Ions on Anaerobic Co-Digestion of Cow Dung and Phragmites australis
Analysis of Influence Factors and Degree for Bio-Methane Generation
Production and Characterization of Rice Husk Chars Obtained under Different Conditions
Activated Carbon Supported Iron Catalyst for the Fischer-Tropsch Synthesis
A Principal Component Analysis of Main Factors Influencing Seed Germination of Bioenergy Grass
Research Progress on Biomass Pyrolysis Kinetics
Biodiesel Preparation from Styrax Confusus Hemsl. Oil Catalyzed by Magnetic Catalyst S2O82--ZrO2/Fe3O4
The Migration Characteristics of Sodium during Biomass Combustion
Characterization and Determination of Acetyl-Coenzyme a Carboxylase (ACCase) from Eukaryotic Alga Chlorella Sp. USTB-01
TG-FTIR Analysis of Three Crop Straws Pyrolysis
Thermogravimetric Analysis of Glucose-Based and Fructose-Based Carbohydrates
The Biomass Energy Transformation and Energy Gain of Wheat
Selective Production of Aromatic Aldehydes from Lignin by Metalloporphyrins/H2O2 System
The Screening and Identification of a Batch of Oleaginous Yeasts
Research on Ethanol Production by Biological Fermentation of Potato Pulp
The Transformation of 35t/h CFB Boiler
Chapter 3: Development and Utilization of Wind Energy
Optimization Design of PV/ Wind Hybrid System Considering Power Supply Reliability
An Experimental Study on Aerodynamic Performance of Spiral Savonius Wind Rotor
Research of Single Component Shock Methods in Wind Turbine Fault Diagnosis
Research on Wind Power Prediction Based on Distributed Wind Farms Siting
The Various Impacts of Wind Power and Thermal Power Generation on Economic Development: A Case Study of Jilin Province
The Strategy Research for Doubly-Fed Wind Power Generator Active-Reactive Hybrid Additional Damping Control
The Optimal Bidding Strategy Based on Multistage Risk for Wind Power Supplier
Wind Farm Grid Integration Simulation Analysis of the Impact of Power System Transient Stability
Analyzing the Wind Power Industry Competitiveness Based on SDM-TGSMN Method in Hebei Province
Analysis of the Wind Power Industry in China Based on the Low-Carbon Economy
Small Signal Stability Analysis of Wind Turbine for Shaft Torsional Vibration Studies
Identification of the Maximum Wind Penetration Level during Over-Frequency Disturbances
Study on Stator-Voltage Decoupling Control Strategy for DFIG-Based Wind Power Turbines
The Harmonic Suppression of Microgrid Based on Parallel Operation of Active Power Filters
Behavior Analysis of the DFIG Wind Turbine in Voltage Double-Dip
Unit Commitment Considering Wind Power and Electrochemical Energy Storage System
Impact of Large-Scale Integrated Wind Farms on the Small Signal Stability of Power System
Research on Rotor over-Current of a Doubly-Fed Induction Generator under Power Grid Fault
The Mitigation of SSO in Doubly-Fed Wind Farms with TCSC
Modeling of Variable-Speed Wind Generator and Study of Voltage Stability of Power Grid with High Wind Power Penetration
Analysis of Rely Protection Response with Large-Scale Wind Power Integration
Interference Effects of Wind Flow around Three Parallel-Aligned Wall-Mounted Cubes Placed in Turbulent Boundary Layer
Analysis of the Technical Features of Wind Energy
Security Constrained Dispatch Based on Wind Power Concentrated Access
Unbalanced Control Strategy for DFIG Used in Wind Turbines
Electromagnetic Design of Concentrated Winding in a Direct-Drive Permanent Magnet Wind Generator with Evaporative-Cooling and Inner-Cooling System
Chapter 4: Geothermal Energy, Fuel Cell, Energy-Saving Technology and Storage Technology
Wudalianchi Geothermal Research
A Model of Continuous Optimized Power Flow with DR
A Battery Dynamic Model for the Power System Simulation
Research on Residential Power Cost Model of Different Pricing Policy
Sampling Investigation of Power Consumption on Existing Residential Buildings in Jingzhou
Research of Target-Controllable Optimal Dispatch for AGC Regulation Capacity
A Novel Road Energy Harvester System Based on Sliding Deceleration Design and Model
The New Energy-Saving Control Technique with Temperature Prediction in Airport Winter Construction
The Matching Research of Soil Source Heat Pump and Central Heating System in Cold Region
Convective Heat Transfer between Covered Kiln Wall and Material Bed
Thermo-Economics Diagnosis for Large Steam Turbine Sections in Power Plants
The Models of Heat Transfer on Choosing Optimal Pans
The Failure Analysis and Countermeasures of Starter Battery
Development and Engineering Design of Technology for Utilization of Liquefied Natural Gas (LNG) Cold Energy in Ice-Making
Research on Energy Consumption Status and Influencing Factors of the Campus in Hubei
Advanced Adaptive Vibration Controller for Active Magnetic Bearing with Application to Energy Storage Flywheel
Thermodynamic Analysis a Novel Wave Rotor Refrigeration Cycle
Overview of Energy Storage Technology in Smart Grid
Simulation Study on Heat Transferring Performance of Vertical T-Tube Ground Heat Exchangers
Analysis the Influence of the Thermal Diffusivity of the Soil around Buried Pipe on Soil Physical Property
Research of Temperature and Humidity Independent Control Air-Conditioning System
Calculation of Coach Body Heat Transfer Coefficient for the High-Speed Railway Train in China
Heat Transfer Enhancement of the Heat Pipe Using SiO2-Water Nanofluid
Experimental Study on Pumping and Recharging of Groundwater-Source Heat Pump System in Fuzhou Basin
VOCs Recovery Energy-Saving Efficiency Decision and Case Study
Energy Efficiency Testing of Ground Source Heat Pump System and Discussion of Fault Diagnosis
Energy Saving and Economic Growth: Empirical Analysis Based on Panel Data
Influence Analysis of Climate Condition on the Optimal Adoption of Distributed Energy Resource Systems in China
Operation Optimization of CCHP System by Linear Programming with Graphic Solution in China
A New Drying Room Heated by Marine Diesel Engine Exhaust Gas
Process Research and Analysis on Potential Development of a Novel Air Separation Process Cooled by LNG Cold Energy
Evaluation of the Performance of a Ground-Water Heat Pump System in Hot-Summer and Cold-Winter Region
Economic and Technical Analysis of Substituting GSHP for Conventional Air-Conditioning System
The Research on Low-Carbon Technology Application Based on Ground Source Heat Pump System
Feasibility Analysis of Saving Energy Potential for an Enterprise
Energy Reduction of Refined Sugar Drying Process in Rotary Dryer and Conditioning Silo Consolidate
Experimental Research on a Heat Pump Water Heater Using Low Pressure Steam as Heat Source
Experiment Study on Performance of Air Source Heat Pump
Working Fluid Selection for Organic Rankine Cycles from a Molecular Structural Point of View
Shaft Furnace Direct Reduction Technology - Midrex and Energiron
Chapter 5: Power System and Automation
Membership Functions for the Formation of the Electrical Equipment State Estimation for Power Stations and Substations
A Method of Detecting Measurement Uncertainty of Voltage Unbalance
The Identification of Single-Line-to-Ground Fault in Neutral Un-Effectively Earthed System
Analysis and Control of Once-Through Boiler-Turbine Unit
Interactive Diagram Modeling of Current Differential Protection Based on IEC61850
A Novel Method of Detecting Measurement Uncertainty of Voltage Deviation
BOCS Based Power System Stability Margin Estimation
Simulation on Dual 12-Pulse Converter Groups in Respectively Controlled UHVDC System
An ICA-Based Audio Feature Fault Detection Method for Transformer Equipments
Development of the Power Load Modeling System with Denoising and Parameter Identification
Research on Generator Excitation Parameter Identification - PSS Low-Pass Link Parameter Identification
Embedded Hardware and Software Co-Design in SOPC-Based Hydropower On-Line Monitoring System
Reliability Evaluation of Thermal Power Units Operation Based on Grey Fuzzy Theory
A Simple Method to Estimate the Influence of the Sending-End HVDC System on the Stability of the AC System
Impact Analysis of Excitation System Reactive Current Compensation on the Stability of Sichuan Power Grid
Research on Performance of Current Transformer Affected by DC Bias
A Loss Allocation Model Based on the Superposition Theorem
Reactive Power Optimization in District Power System
A Method of Online Topology Adjustment Decision Support for Short-Circuit Current Limitation
Theoretical Analysis and Implementation of Novel Self-Adaptive Directional Relay
The Selection of Power Supply Mode Based on Reliability's Social Costs
An Evaluation Method for Power Supply Capability of Distribution System Based on Simplified Grid Structure
An Evaluation Method of Micro-Network Reliability under Isolating State
Optimization of Contact Structure among Main Transformers Considering Unit Power Supply Capacity Cost
Comprehensive Assessment of Power Transformer Condition Based on the Fault Tree and the Analytic Hierarchy Process
A Relay Scheme for Distribution Networks Considering the Control Mode of Inverter-Based Distributed Generator
The Coordination and Optimization Study of PSS Parameters of Multiple Generators
A Parametric Study of a Gravitation Vortex Power Plant
Research on Optimization Technology of Electromagnetic Transformer
Grid Component Outage Probability Model Considering Weather and Aging Factors
Research on the Technology of Failure Functional Recovery for Secondary Equipment in Smart Substation
Research on Designing and Modeling of the Hybrid Energy Power Supply System
Chapter 6: High Voltage and Insulation Technology
Study on Methodology Monitoring Power Cable Insulation Defects
Study on Identification Method of GIS Insulation Defects Based on ARMA
Study on Detection Method of Transformer Winding Insulation Defects Based on Lightning Impulse Test
Study the Effect of Radio Interference of the EHV Transmission Line on GNSS Signals
Research on the Effect of Lightning Oscillatory Wave to Transformer Winding Turn-to-Turn Insulation Fault
Aging Characteristic Parameters Analysis and Experimental Study of MOA Varistor
Study on the Methodology of Detection for Transformer Winding Insulation Defects Based on Impulse Test
New Methodology of On-Line Monitoring for Transmission Line Galloping
New Methodology of On-Line Monitoring for High Voltage Overhead Transmission Line Icing
Study on Methodology Detecting Turn-to-Turn Short Circuit of Transformer
Study on the Methodology of Detection for Power Cable Insulation Defects Based on Oscillatory Wave
Study on a New Method of Metal Oxide Surge Arrester Monitoring
Research on Diagnosis Method of GIS Insulation Defects Based on Polynomial Fitting
Study on the Methodology Monitoring Transformer Bushing Insulation Defects
Study of Remote Monitoring and Diagnostic System for Transformers Based on Multi-Agent Techniques
Characteristic Analysis of the Insulation State of Single-Core XLPE Cables
Study on the Shock Wave Pressure Characteristics of Pulsed Discharge in Liquid in the Pipe
Experiment of Transient Electric Shock under HVDC Transmission Lines
Design and Application of High Potential Acquisition System for Corona Current Measurement
Research about Subsynchronous Oscillation Caused by High-Voltage-Direct-Current
Design on Synchronize Debugging Device for Extra High Voltage Transmission Line Longitudinal Protection
Defects Analysis and Reconstruction for 10kV Circuit Breaker
Electromagnetic - Electromechanical Transient Hybrid Simulation of Deyang-Baoji HVDC System Based on ADPSS
Chapter 7: Power Electronics and Power Drives, Power Equipment
Influence of Eddy Current Effect on the Circuit Breaker Contact Mechanism Heat Loss
High Breakdown Voltage GaN Power HEMT on Si Substrate
Position Sensorless DTC of BLDC Motor Driver Based on Sliding Mode Observer
Output Impedance Modified Based Waveform Control for Single Phase Inverter
Induction Motor Fault Diagnosis Using Voltage Spectrum of Auxiliary Winding and Lissajous Curve of its Park Components
An Information Security Assessments Framework for Power Control Systems
Chapter 7: Power Electronics and Power Drives, Power Equipment
Test Research on the Suppressing Radio Interference of DC Transmission Lines by Ferrite Cores
Research and Design of the PLC-Based Control System for Thermal Power Plant Flue Gas Desulfurization
Research on Reliability Test Technology of Overload Relay
Design of Control System of Acceleration and Deceleration of Stepper Motor Based on ATMEGA128
Detect Humidity and Temperature of Multiple Points by CAN Bus
Study of Effects of Differential via on Signal Integrity
Magnetically Controlled Reactor Tap Ratio Optimization Research
Research and Application of Load Control Based on Setpoint Overshoot Method
2DEG Transport Properties in AlGaN/GaN Double Heterostructure HEMT with High In Composition InGaN Channel
Research on DC Grid Power Characteristics and DC Active Power Filtering
Properties of N-Polar GaN Films Grown by MOCVD on C-Face 6H-SiC Substrate
Intelligent Electrical Appliance Event Recognition Using Multi-Load Decomposition
Experimental Study of the Effects of Different Space Forms on SAW Passive Wireless Temperature Measurement System
Research on Commutation Failure of HVDC
The Temperature Rise Analysis of the Old Conductors
Chapter 8: Smart Grid Technologies and Power System Management
The Realization of a Highly Modulized Open-Ended Distribution System Comprehensive Planning Platform Compatible with CIM Model
Study on the Cloud Computing Architecture for Smart Grid Application
Analysis of the Development Trend of Intelligent Power Grid
Microgrid Protection Based on Specific Current Injection
Expert Library-Based Data Verification for National-Regional-Provincial Power Grid Integration Security Correction
Worldwide Smart Grid Progress and Trends of China
Research on Several Key Technologies of Power Grid Integrated Dispatching and Control System
The Empirical Study of Electricity Market's Financial Risk Assessment Based on CVaR
Dynamic Communication for Smart Metering: Leading Edge for Sustainable Energy and PHEV
The Game-Theoretic Approach to Pricing in China's Semi-Deregulated Electricity Market
Regional Power Planning Optimization Model and Scenario Analysis Considering the Environmental Cost
Research on Seamless Transfer Strategy of Micro-Grid Based on Energy Storage
Control Methods and Techniques on GIC in Power Systems
Impacts of Short-Term Generation Rights Transaction on Transmission Loss for Power System
Operational Emission Reduction Capability of Regional Power System
Reactive Power Optimization of Distribution System Incorporating Distributed Generations and Running Cost
The Framework and Key Technologies of Power Grid Operation Track Oriented Automatic Smart Dispatch
A Chance-Constrained Programming Model for the Optimal Stopping Decision of Power R&D Project
Study on the Algorithm of Distribution Network Planning Containing Distributed Power
Dynamic Simulation of a Microgrid with Renewable Microsources Based on DIgSILENT/PowerFactory
Modeling and Simulation for Quantitative Assessment of Process Level Networks in Substation Based on OPNET
Research of Building Safety Management System of Reply Protection in Power Company Based on Workflow
Design and Implementation of Visualizing the Intelligent Dispatching and Maintenance Arrangement System for 110kV Power Grid
Problem Analysis and Treatment Based on Condensate Polishing System in 600MW Unit of Power Plant
Research on the Design and Test of Smart Substation OnLine Monitoring System
Hierarchical Simulated Annealing-Reinforcement Learning Energy Management for Smart Grids
Research on the Functional Framework and Business Model of Advanced Metering Infrastructure
Health Assessment and Life Prediction of Transformer
Study on Forecasting Model of Monthly Electricity Consumption Based on Kernel Partial Least-Squares and Exponential Smoothing Method
Energy Performance Contracting and its Application in HVAC
Chapter 9: Energy Chemical Engineering and Energy Materials
Effect of PMMA and Graphene Addition on the Performances of Organic Solar Cells
Effect of Bi Addition on the Electrochemical Behavior of Zinc Electrodes in Concentrated Alkaline Solutions
Investigations of Hydrodynamics and Heat Transfers in a Modified Reactor Using Fluid Mixers
Syngas Production via Carbon Dioxide Reforming of Methane in a Wall-Coated Monolith Reactor
Preparation and Electrochemical Performance of LiFePO4/C Composite
Research on Hydrocracking Reaction Conditions of Heavy Polycyclic Aromatic Hydrocarbon
Experimental Investigation on Heat Transfer Characteristics of CO2-Based Foam Fracturing Fluid
Technical Feasibility of Small-Scale GTL Process towards Heat Integration: A Case Study of Nongtum A Reservoir in Thailand
Photocatalytic Hydrogen Production from Water Splitting on CdS and Cd0.8Zn0.2S Nanorods: Influence of Ni(OH)2 Modification
CeO2/CuO Catalysts with Na2CO3 as Precipitant for Preferential Oxidation of CO
Synthesis and Application of a Polyether Demulsifiers
Analysis of Coke Oven Gas Dehydration Technology for Vehicles
Experimental Study on Low-Temperature Carbonization of Low Rank Coal
Fusibility Characteristics of Slag from Fluidized-Bed Gasification of Jincheng Anthracite
Characterization of Multiblock Sulfonated Poly(Arylene Ether Sulfone) as Proton Exchange Membranes
Cost of LNG-Fueled Container Vessels
Self-Ordering Process of Hexagonal Cells in Porous Anodic TiO2 Nanotubes
Theoretical Study on Reactivity of Cu-Based Oxygen Carrier for CO Chemical Looping Combustion
Synthesis of Chiral Azobenzene and their Effect on Cholesteric Liquid Crystal
Analysis on Toxic and Hazardous Substances of Polymer Surfactants Used in Oilfields
Study on Electrochemical Impedance Spectrum Analysis of LiFePO4 in Aqueous Solutions by Using Powder Microelectrode
Continuous Esterification of n-Butyl Acetate Catalyzed by Ionic Liquid
Synthesis and Characterization of Poly(acrylic acid)/PVP Modified Bentonite Superabsorbent Polymer
Synthesis on Spiropyran/ SrAl2O4:Eu2+,Dy3+ Photochromic Phosphor and its Solvent Effects
Hydrothermal Modification Effect on the Catalyst for Etherification
Research on Preparation and Application of High-Performance Hydrogenated Transformer Oil
Improvement of Organic Loading Rate on Hydrogen Production Using Continuous Stirred Tank
Experimental Study on Coal Chemical Looping Combustion Using CuFe2O4 as Oxygen Carrier
Chapter 10: Energy Security, Management and Clean Use
Study on the Explosion Characteristic Parameters of Gasoline Vapor Inerted by CO2
Study on Energy Structure and Energy Security in Inner Mongolia
How Welfare Variables Influence Energy Consumption? - Evidence from Ecuador and Mexico
Experimental Study on the Four Pipes Self-Supporting Steel Chimney
Study on EGR Technology Routes of Vehicle Engine - A Review
Prediction on China's Energy Demand Based on RBF Neural Network Model
Study on Deoxidization of Coal-Bed Methane under Low Temperature
Study on the Coal-Based Synfuels System Coupled with Nuclear Energy
Construction of China's Energy Condition Index
Synthesis and Properties of Hyperbranched Dispersant for High Concentration of CWS
The Impact of Effective Expansion around on Energy Enterprise Value
Study on China's Energy Demand Ridge Regression Prediction Based on Path Analysis
Low-Temperature Pyrolysis Characteristics of Inner Mongolia Lignite
Growth Evaluation of Listed Companies of China's New Energy Industry
Research on China's Legal Protection System for Energy Security
Analysis of Zhuzhou Energy Efficiency Based on DEA
Experimental Study on the Environmental Behaviors of Poisonous Trace Elements in Post-Gasified Residues
Comparative Analysis of Energy Consumption in Municipalities of China
Study on Prediction of Coal Demand by the Improved Artificial Fish-Swarm Neural Network
Gas Fractal Seepage Properties Research in Soft-Slicing Coal with Triaxial Pressure System
Simulation Experiment for Gas Pipeline Leakage Detection
Exergy Analysis of Energy Utilization for China's Railway Transport Enterprises, from 2006-2010
Chapter 11: Architecture, Construction Technology and Energy-Saving Technology
The Study of Isolated Multi-Input Converter for Green Energy Application
Unscrambling the Building Envelope Insulation Technique in "Tianjin Energy Efficiency Design Standard for Rural Residential Buildings"
Research on Foundation Settlement of Oil Tank Project Based on Red Soil Foundation
Applicability Research of Germany "Passive Housing" Technology in Hot Summer and Cold Winter Area in China
Numerical Simulation on the Influence of Double-Jet Air Curtain of Smoke-Preventing in Tunnel Fires
Synthesis and Properties of a Novel Environmentally Friendly Phase Change Energy Storage Coating Additive
The Thermal Insulation Design for Refuge Chamber
Comparison of Air Distribution of Induced Ventilation System's Different Exhaust Way in Underground Garage
Environmental Impact Evaluation and Economy Analysis of Air-Conditioning Cold and Heat Source Based on TEWI Index
Research on Demand Controlled Ventilation Strategy for Laboratory Ventilation System
Dynamic Modeling and Simulation for Double Effect Absorption Refrigeration Using [mmim]DMP/CH3OH as Working Pairs
Prediction of the Heat-Insulating Crumb Rubber Brick Walls Design by the Finite Element Method
The Analysis of Green Building's outside Decoration Materials
Effect of Micro-Grinding Medium on the Particle Size Distribution and Properties of Portland Cement
Model Research on Comprehensive Efficiency Evaluation of Heating Reconstruction Project
The Application of PC Technology in Public Buildings: A Case Study of Security Center in "Twelfth National Athletics"
Thermal Behavior of Double Glass Window Filled with Absorbing and Non-Absorbing Gas
A Study on the Current Status of House Performance Rating System of South Korea and Development Plan
The Illumination Characteristics of Glass-Based Mazu Temple Buildings Compared to Traditional Temples in Taiwan
Field Survey on Occupant Thermal Comfort of Cold Regions in Transition Season
Chapter 12: New Energy Vehicles, Electric Vehicles
Problems and Countermeasures in the Popularization of China's New Energy Vehicles Market
Pure Electric Vehicle Driving State Data Collection Terminal Design and Telematics Applications
Analysis on the Development of New Energy Vehicles in China
Design and its Application of Hybrid Electric Vehicle Driving Status Data Acquisition Terminal
A Fuzzy Logic Controller for Vehicle-Active Suspension Systems
Three-Stage Precise Converter in EV Charging-Discharging-Storage Integration Station
Online State-of-Charge Estimation of Li-Ion Battery Based on the Second-Order RC Model
Study on Effect of Electric Vehicle Industry to Energy and Environment
Enhanced Electrochemical Performance of [Ni4Al(OH)10]OH by Mechanically Blending Nanometric Zinc Oxide
Charging and Discharging Control of Plug-In Electric Vehicle Based on Immune Clone Algorithm
Evaluation Method of Regenerative Braking for Electric Vehicles
Research on Driving Factors of Green Innovation in China's Auto Parts Manufacturing Enterprises
State of Charge Estimation of Power Lithium-Ion Battery Based on Sliding Mode Observer
Chapter 13: Machinery and Equipment for Industrial Manufacture
Study on Cutting Tooth Strength of Spiral Drilling Shearer Based on LS-DYNA
Research on Cavitation and Runaway Tests of Mixed-Flow Pump with Different Blade Angles
The Design and Analysis on 200 Liters Large Material Barrels with Double L-Rings
Effect on Position of Electromagnetic Stirring on Inclusion Behaviors in Billet
Units Commitment Optimization of Pumping Station Based on Velocity Uniformity Analysis
The Research on the Reliability Distribution Model of Wire Cut Electrical Discharge Machining
Air Flow Simulation in High-Pressure Fan with Splitter Blade
Study on Portable Multifunctional Laser Lighter
Research of Feature Model Constructing Techniques for Diesel Engine Based on EON Platform
Establishing Quality Evaluation System of Complete Sets of Equipment for Water Treatment
Analysis and Modification on Blockage Problem of BBD Double Inlet and Outlet Tube Mill Separator
The Study on the Top Clearance Plunger Pump in Diesel Engine
Study on the Mechanism of Soot Reduction by Multi-Injection Coupled with EGR
A Comparative Analysis of Different Cycle Diesel Engine Based on Three-Dimensional Simulation
Assessment of the Fire Risk and Thermal Resistance of Tyres
Design of Decanter System Floating Tank Lifting Type
Analysis of 3D Printing Technology in China - Taking Avic Heavy Machinery Co.,Ltd (600765) as an Example
Three-Dimensional Numerical Simulation of Fluid with Sparse Particles' Erosion to Pipelines
Study on Diagnosis Method of High Back Pressure in Well Head for Circular Pipe Network
Wind Load Simulation Test for the Vehicle Mounted Extensible Mast System
High-Speed Data Acquisition System Based on MP424 Acquisition Card
Experimental Research on Connection Performance of Variable-Pitch Threaded Casing
A Study on Emissions of Small Diesel Engines
Study on Heat Transfer and Resistance Characteristics of H-Type Finned Tube
Numerical Modeling and Simulation of Pressure Wave in Combination Electronic Unit Pump High Pressure Pipeline
Simulations of Waste Heat Recovery System Using R123 and R245fa for Heavy-Duty Diesel Engines
Analysis of Exhausting Flue Gas Temperature Abnormal Accompanied with the Boiler Load Changing
Experimental Study of Cu&Fe Molecular Sieve Catalyst for Urea-SCR After-Treatment System
Research on Simulation for the Solenoid Valve Parameters of High-Power Electronic Controlled Diesel Engine
Research of Virtual Prototype System on Aiming Device of Setting Screws in Acetabulum Anterior Column
Design and Control of Genetic Algorithm-Based Multi-Station LED Chip Waxing Machine
Study on Internal Combustion Engine Exhaust Noise by Orthogonal Test
Numerical Study of Wakes on Downstream Effects in Static Cascade Flow Field to Simulation of Rotor Wake
Performance Analyses of Adaptive Access Mechanism in IEEE 802.11 WLANs
Numerical Optimization of Oilfield Heating Furnace Research
Chapter 14: Modeling, Computational Technologies and Control in Industry
Fault Detection of Carbide Anvil Based on Hurst Exponent and BP Neural Network
Research on Experimentation of Real-Time Dynamic Scene Simulation Based on UML
Study on Image Retrieval Based on Active Feedback
The Location Model of the Electric Vehicle Charging Station Based on Simulated Annealing Algorithm
Preprocessing and Feature Extraction, Coding, Matching Algorithm for Fingerprint Image
Application of QR Code Rebuild Library Integration Community
Research and Application of K-DOPS Algorithm in Virtual Maintenance Training System for Diesel Engine
A Structure of Cognitive Unit for Survivable System
A Semi-Parametric Model for Longitudinal Count Data
A Hybrid Programming with C++ and Fortran for Geostatistical Modeling in Reservoirs
Halcon-Based Optical Fiber Geometry Parameters Measurement Algorithm
A Technology to Multi-Resolution Surface Reconstruction
A Study on the Design of Context-Awareness Middleware for Enclosed Growth Management System
Evaluation on Multicast Congestion Control Scheme
Kernel Based Estimation for a Non-Homogeneous Poisson Processes
Research and Implementation of Intelligent Transportation System at the Intersection Signal Lamp on FPGA
Harvesting Analysis of a Predator-Prey System with Functional Response
Contrast of Time-Frequency Analysis Methods and Fusion of Wigner-Ville Distribution and Wavelet Transform
Design and Development of Refueling Training Simulation System for Multi-Types Aeroplane
Research and Application of the Auto-Control Cooling System for the Diesel Engine
Synchronization of Different Fractional Order Time-Delay Chaotic Systems Using Active Control
by "Nielsen BookData"
