Energy and power technology : selected, peer reviewed papers from the 2013 International Conference on Advances in Energy and Environmental Science (ICAEES 2013), July 30-31, 2013, Guangzhou, China

著者

    • International Conference on Advances in Energy and Environmental Science
    • Yu, Xinwei
    • Ji, Hongbing
    • Chen, Shengzhou
    • Liu, Xiaoguo
    • Zeng, Qingzhu

書誌事項

Energy and power technology : selected, peer reviewed papers from the 2013 International Conference on Advances in Energy and Environmental Science (ICAEES 2013), July 30-31, 2013, Guangzhou, China

edited by Xinwei Yu ... [et al.]

(Advanced materials research, v. 805-806)

Trans Tech Publications, c2013

  • : set
  • Part 1
  • Part 2

大学図書館所蔵 件 / 1

この図書・雑誌をさがす

注記

Includes bibliographical references and indexes

Other editors: Hongbing Ji, Shengzhou Chen, Xiaoguo Liu and Qingzhu Zeng

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Energy and environment have become the central theme in several fields of research and in various policy arenas. The collection of selected, peer reviewed papers from the 2013 International Conference on Advances in Energy and Environmental Science (ICAEES 2013), July 30-31, 2013, Guangzhou, China. The 367 papers are grouped as follows: Chapter 1: Development and Utilization of Solar Energy; Chapter 2: Development and Utilization of Biomass Energy; Chapter 3: Development and Utilization of Wind Energy; Chapter 4: Geothermal Energy, Fuel Cell, Energy-saving Technology and Storage Technology; Chapter 5: Power System and Automation; Chapter 6: High Voltage and Insulation Technology; Chapter 7: Power Electronics and Power Drives, Power Equipment; Chapter 8: Smart Grid Technologies and Power System Management; Chapter 9: Energy Chemical Engineering and Energy Materials; Chapter 10: Energy Security, Management and Clean Use; Chapter 11: Architecture, Construction Technology and Energy-saving Technology; Chapter 12: New Energy Vehicles, Electric Vehicles; Chapter 13: Machinery and Equipment for Industrial Manufacture; Chapter 14: Modeling, Computational Technologies and Control in Industry.

目次

Preface and Conference Organization Chapter 1: Development and Utilization of Solar Energy Efficiency Organic/Inorganic Composite Thin Film Solar Cells Study on Solar Photovoltaic Industry Chain Vertical Integration Investment Decisions Economic Analysis of Solar Trough, Tower and Dish Power Plants Thermal Character and Generating Capacity Analysis of Solar Linear Fresnel Thermal Power Plant Application of Improved Moment Invariants and SVM in the Recognition of Solar Cell Debris Research on Testing Method of PV Inverter Flicker Based on IEC Standards EMI Noise Testing and Diagnosis for PV Inverter Substrate with Si Nanoparticles Prepared by Low Pressure Chemical Vapor Deposition for Application in Si Solar Cells Test Analysis on the Electromagnetic Environment of Photovoltaic Power Transmission System An Improved P&O MPPT Method for Photovoltaic Power System Operation Mode Analysis of Joint Heating about Solar Collectors and Ground Source Heat Pump Power Characteristics of Photovoltaic Modules of Solar-Powered Airplanes Including Thermal Effects Effects of Multi-Walled Carbon Nanotubes on Enhancing the Thermodynamics Characteristic of Alkali Nitrate and Chlorate Salt for Concentration Solar Plants A Novel Voltage Sag Generator for Grid-Connected PV System's Low Voltage Ride-Through Test Effect of Water Distribution Ways on the Operation of Solar Pond Study on Resistance of Probe for Solar-Powered Irrigation Device Research on Anti-Islanding Technology for Photovoltaic Grid-Connected Based on the Positive Power Feedback Research on Designing Rooftop Photovoltaic Systems and Building Integration in Cold Areas Fault Diagnosis for Building Grid-Connected Photovoltaic System Based on Analysis of Energy Loss Influence of Oxygen Ions Bombardment on Optical Properties of MgF2 Anti-Reflection Films The Study of Mathematical Model of the Solar Cell Theoretical Simulation of Optical Collector for Solar Optic Fiber Lighting System Based on Rotary Parabola Mirror Photovoltaic Power Generation Forecasting Model with Improved Support Vector Machine Regression Based on Rough Set and Similar Day Influence of FIT Rate on the Adoption of Residential PV System in China Photovoltaic Driven Liquid Dehumidification Air-Conditioning System Effect of Pulsed-DC Power on the Zinc Oxide Window Layer of CIGS Solar Cells Deposited by In-Line Sputtering Methods Preparation of Ag Nanoparticles Arrays for Silicon Solar Cells One-Year Evaluation of a 20 MW Photovoltaic Power Station Chapter 2: Development and Utilization of Biomass Energy Ultrasonic Vibration-Assisted Pelleting of Cellulosic Biomass: A Review Response Surface Method in One Step Optimization of Methyl Esterification of Tung Oil and Contrastive Analysis with Two Step Process Biofuel Fermentation by Hyperbutanol-Producing Mutants in Sweet Corn Stalk Juice Medium Development and Construction of a Fertilizer Rotary Dryer Using Waste Heat from an Electrical Generator in a Pig Farm Enzyme-Catalyzed Synthesis of Microalgae-Derived Biodiesel Using a Chemically Modified Immobilized Lipase Effect of Molten Alkali on Pyrolysis of Fatty Acid Sodium Salts to Hydrocarbon Analytical Fast Pyrolysis of Glucose, Cellubiose and Cellulose: Comparison of the Pyrolytic Product Distribution Effect of Biogas Slurry on Biogas Production for Anaerobic Digestion of Corn Straws The Numerical Simulation of Combustion on Vinegar Residue in a Biomass Boiler Experimental Study on Combustion Characteristics of Biomass and Coal Blended Characteristics of Mixed Fermentation by Alternanthera Philoxeroides and Corn Stalk for Biogas Production Visualization of Lipid Bodies in Chlamydomonas reinhardtii Living Cells with Fluorescent Microscopy Effects of Nickel Ions on Anaerobic Co-Digestion of Cow Dung and Phragmites australis Analysis of Influence Factors and Degree for Bio-Methane Generation Production and Characterization of Rice Husk Chars Obtained under Different Conditions Activated Carbon Supported Iron Catalyst for the Fischer-Tropsch Synthesis A Principal Component Analysis of Main Factors Influencing Seed Germination of Bioenergy Grass Research Progress on Biomass Pyrolysis Kinetics Biodiesel Preparation from Styrax Confusus Hemsl. Oil Catalyzed by Magnetic Catalyst S2O82--ZrO2/Fe3O4 The Migration Characteristics of Sodium during Biomass Combustion Characterization and Determination of Acetyl-Coenzyme a Carboxylase (ACCase) from Eukaryotic Alga Chlorella Sp. USTB-01 TG-FTIR Analysis of Three Crop Straws Pyrolysis Thermogravimetric Analysis of Glucose-Based and Fructose-Based Carbohydrates The Biomass Energy Transformation and Energy Gain of Wheat Selective Production of Aromatic Aldehydes from Lignin by Metalloporphyrins/H2O2 System The Screening and Identification of a Batch of Oleaginous Yeasts Research on Ethanol Production by Biological Fermentation of Potato Pulp The Transformation of 35t/h CFB Boiler Chapter 3: Development and Utilization of Wind Energy Optimization Design of PV/ Wind Hybrid System Considering Power Supply Reliability An Experimental Study on Aerodynamic Performance of Spiral Savonius Wind Rotor Research of Single Component Shock Methods in Wind Turbine Fault Diagnosis Research on Wind Power Prediction Based on Distributed Wind Farms Siting The Various Impacts of Wind Power and Thermal Power Generation on Economic Development: A Case Study of Jilin Province The Strategy Research for Doubly-Fed Wind Power Generator Active-Reactive Hybrid Additional Damping Control The Optimal Bidding Strategy Based on Multistage Risk for Wind Power Supplier Wind Farm Grid Integration Simulation Analysis of the Impact of Power System Transient Stability Analyzing the Wind Power Industry Competitiveness Based on SDM-TGSMN Method in Hebei Province Analysis of the Wind Power Industry in China Based on the Low-Carbon Economy Small Signal Stability Analysis of Wind Turbine for Shaft Torsional Vibration Studies Identification of the Maximum Wind Penetration Level during Over-Frequency Disturbances Study on Stator-Voltage Decoupling Control Strategy for DFIG-Based Wind Power Turbines The Harmonic Suppression of Microgrid Based on Parallel Operation of Active Power Filters Behavior Analysis of the DFIG Wind Turbine in Voltage Double-Dip Unit Commitment Considering Wind Power and Electrochemical Energy Storage System Impact of Large-Scale Integrated Wind Farms on the Small Signal Stability of Power System Research on Rotor over-Current of a Doubly-Fed Induction Generator under Power Grid Fault The Mitigation of SSO in Doubly-Fed Wind Farms with TCSC Modeling of Variable-Speed Wind Generator and Study of Voltage Stability of Power Grid with High Wind Power Penetration Analysis of Rely Protection Response with Large-Scale Wind Power Integration Interference Effects of Wind Flow around Three Parallel-Aligned Wall-Mounted Cubes Placed in Turbulent Boundary Layer Analysis of the Technical Features of Wind Energy Security Constrained Dispatch Based on Wind Power Concentrated Access Unbalanced Control Strategy for DFIG Used in Wind Turbines Electromagnetic Design of Concentrated Winding in a Direct-Drive Permanent Magnet Wind Generator with Evaporative-Cooling and Inner-Cooling System Chapter 4: Geothermal Energy, Fuel Cell, Energy-Saving Technology and Storage Technology Wudalianchi Geothermal Research A Model of Continuous Optimized Power Flow with DR A Battery Dynamic Model for the Power System Simulation Research on Residential Power Cost Model of Different Pricing Policy Sampling Investigation of Power Consumption on Existing Residential Buildings in Jingzhou Research of Target-Controllable Optimal Dispatch for AGC Regulation Capacity A Novel Road Energy Harvester System Based on Sliding Deceleration Design and Model The New Energy-Saving Control Technique with Temperature Prediction in Airport Winter Construction The Matching Research of Soil Source Heat Pump and Central Heating System in Cold Region Convective Heat Transfer between Covered Kiln Wall and Material Bed Thermo-Economics Diagnosis for Large Steam Turbine Sections in Power Plants The Models of Heat Transfer on Choosing Optimal Pans The Failure Analysis and Countermeasures of Starter Battery Development and Engineering Design of Technology for Utilization of Liquefied Natural Gas (LNG) Cold Energy in Ice-Making Research on Energy Consumption Status and Influencing Factors of the Campus in Hubei Advanced Adaptive Vibration Controller for Active Magnetic Bearing with Application to Energy Storage Flywheel Thermodynamic Analysis a Novel Wave Rotor Refrigeration Cycle Overview of Energy Storage Technology in Smart Grid Simulation Study on Heat Transferring Performance of Vertical T-Tube Ground Heat Exchangers Analysis the Influence of the Thermal Diffusivity of the Soil around Buried Pipe on Soil Physical Property Research of Temperature and Humidity Independent Control Air-Conditioning System Calculation of Coach Body Heat Transfer Coefficient for the High-Speed Railway Train in China Heat Transfer Enhancement of the Heat Pipe Using SiO2-Water Nanofluid Experimental Study on Pumping and Recharging of Groundwater-Source Heat Pump System in Fuzhou Basin VOCs Recovery Energy-Saving Efficiency Decision and Case Study Energy Efficiency Testing of Ground Source Heat Pump System and Discussion of Fault Diagnosis Energy Saving and Economic Growth: Empirical Analysis Based on Panel Data Influence Analysis of Climate Condition on the Optimal Adoption of Distributed Energy Resource Systems in China Operation Optimization of CCHP System by Linear Programming with Graphic Solution in China A New Drying Room Heated by Marine Diesel Engine Exhaust Gas Process Research and Analysis on Potential Development of a Novel Air Separation Process Cooled by LNG Cold Energy Evaluation of the Performance of a Ground-Water Heat Pump System in Hot-Summer and Cold-Winter Region Economic and Technical Analysis of Substituting GSHP for Conventional Air-Conditioning System The Research on Low-Carbon Technology Application Based on Ground Source Heat Pump System Feasibility Analysis of Saving Energy Potential for an Enterprise Energy Reduction of Refined Sugar Drying Process in Rotary Dryer and Conditioning Silo Consolidate Experimental Research on a Heat Pump Water Heater Using Low Pressure Steam as Heat Source Experiment Study on Performance of Air Source Heat Pump Working Fluid Selection for Organic Rankine Cycles from a Molecular Structural Point of View Shaft Furnace Direct Reduction Technology - Midrex and Energiron Chapter 5: Power System and Automation Membership Functions for the Formation of the Electrical Equipment State Estimation for Power Stations and Substations A Method of Detecting Measurement Uncertainty of Voltage Unbalance The Identification of Single-Line-to-Ground Fault in Neutral Un-Effectively Earthed System Analysis and Control of Once-Through Boiler-Turbine Unit Interactive Diagram Modeling of Current Differential Protection Based on IEC61850 A Novel Method of Detecting Measurement Uncertainty of Voltage Deviation BOCS Based Power System Stability Margin Estimation Simulation on Dual 12-Pulse Converter Groups in Respectively Controlled UHVDC System An ICA-Based Audio Feature Fault Detection Method for Transformer Equipments Development of the Power Load Modeling System with Denoising and Parameter Identification Research on Generator Excitation Parameter Identification - PSS Low-Pass Link Parameter Identification Embedded Hardware and Software Co-Design in SOPC-Based Hydropower On-Line Monitoring System Reliability Evaluation of Thermal Power Units Operation Based on Grey Fuzzy Theory A Simple Method to Estimate the Influence of the Sending-End HVDC System on the Stability of the AC System Impact Analysis of Excitation System Reactive Current Compensation on the Stability of Sichuan Power Grid Research on Performance of Current Transformer Affected by DC Bias A Loss Allocation Model Based on the Superposition Theorem Reactive Power Optimization in District Power System A Method of Online Topology Adjustment Decision Support for Short-Circuit Current Limitation Theoretical Analysis and Implementation of Novel Self-Adaptive Directional Relay The Selection of Power Supply Mode Based on Reliability's Social Costs An Evaluation Method for Power Supply Capability of Distribution System Based on Simplified Grid Structure An Evaluation Method of Micro-Network Reliability under Isolating State Optimization of Contact Structure among Main Transformers Considering Unit Power Supply Capacity Cost Comprehensive Assessment of Power Transformer Condition Based on the Fault Tree and the Analytic Hierarchy Process A Relay Scheme for Distribution Networks Considering the Control Mode of Inverter-Based Distributed Generator The Coordination and Optimization Study of PSS Parameters of Multiple Generators A Parametric Study of a Gravitation Vortex Power Plant Research on Optimization Technology of Electromagnetic Transformer Grid Component Outage Probability Model Considering Weather and Aging Factors Research on the Technology of Failure Functional Recovery for Secondary Equipment in Smart Substation Research on Designing and Modeling of the Hybrid Energy Power Supply System Chapter 6: High Voltage and Insulation Technology Study on Methodology Monitoring Power Cable Insulation Defects Study on Identification Method of GIS Insulation Defects Based on ARMA Study on Detection Method of Transformer Winding Insulation Defects Based on Lightning Impulse Test Study the Effect of Radio Interference of the EHV Transmission Line on GNSS Signals Research on the Effect of Lightning Oscillatory Wave to Transformer Winding Turn-to-Turn Insulation Fault Aging Characteristic Parameters Analysis and Experimental Study of MOA Varistor Study on the Methodology of Detection for Transformer Winding Insulation Defects Based on Impulse Test New Methodology of On-Line Monitoring for Transmission Line Galloping New Methodology of On-Line Monitoring for High Voltage Overhead Transmission Line Icing Study on Methodology Detecting Turn-to-Turn Short Circuit of Transformer Study on the Methodology of Detection for Power Cable Insulation Defects Based on Oscillatory Wave Study on a New Method of Metal Oxide Surge Arrester Monitoring Research on Diagnosis Method of GIS Insulation Defects Based on Polynomial Fitting Study on the Methodology Monitoring Transformer Bushing Insulation Defects Study of Remote Monitoring and Diagnostic System for Transformers Based on Multi-Agent Techniques Characteristic Analysis of the Insulation State of Single-Core XLPE Cables Study on the Shock Wave Pressure Characteristics of Pulsed Discharge in Liquid in the Pipe Experiment of Transient Electric Shock under HVDC Transmission Lines Design and Application of High Potential Acquisition System for Corona Current Measurement Research about Subsynchronous Oscillation Caused by High-Voltage-Direct-Current Design on Synchronize Debugging Device for Extra High Voltage Transmission Line Longitudinal Protection Defects Analysis and Reconstruction for 10kV Circuit Breaker Electromagnetic - Electromechanical Transient Hybrid Simulation of Deyang-Baoji HVDC System Based on ADPSS Chapter 7: Power Electronics and Power Drives, Power Equipment Influence of Eddy Current Effect on the Circuit Breaker Contact Mechanism Heat Loss High Breakdown Voltage GaN Power HEMT on Si Substrate Position Sensorless DTC of BLDC Motor Driver Based on Sliding Mode Observer Output Impedance Modified Based Waveform Control for Single Phase Inverter Induction Motor Fault Diagnosis Using Voltage Spectrum of Auxiliary Winding and Lissajous Curve of its Park Components An Information Security Assessments Framework for Power Control Systems Chapter 7: Power Electronics and Power Drives, Power Equipment Test Research on the Suppressing Radio Interference of DC Transmission Lines by Ferrite Cores Research and Design of the PLC-Based Control System for Thermal Power Plant Flue Gas Desulfurization Research on Reliability Test Technology of Overload Relay Design of Control System of Acceleration and Deceleration of Stepper Motor Based on ATMEGA128 Detect Humidity and Temperature of Multiple Points by CAN Bus Study of Effects of Differential via on Signal Integrity Magnetically Controlled Reactor Tap Ratio Optimization Research Research and Application of Load Control Based on Setpoint Overshoot Method 2DEG Transport Properties in AlGaN/GaN Double Heterostructure HEMT with High In Composition InGaN Channel Research on DC Grid Power Characteristics and DC Active Power Filtering Properties of N-Polar GaN Films Grown by MOCVD on C-Face 6H-SiC Substrate Intelligent Electrical Appliance Event Recognition Using Multi-Load Decomposition Experimental Study of the Effects of Different Space Forms on SAW Passive Wireless Temperature Measurement System Research on Commutation Failure of HVDC The Temperature Rise Analysis of the Old Conductors Chapter 8: Smart Grid Technologies and Power System Management The Realization of a Highly Modulized Open-Ended Distribution System Comprehensive Planning Platform Compatible with CIM Model Study on the Cloud Computing Architecture for Smart Grid Application Analysis of the Development Trend of Intelligent Power Grid Microgrid Protection Based on Specific Current Injection Expert Library-Based Data Verification for National-Regional-Provincial Power Grid Integration Security Correction Worldwide Smart Grid Progress and Trends of China Research on Several Key Technologies of Power Grid Integrated Dispatching and Control System The Empirical Study of Electricity Market's Financial Risk Assessment Based on CVaR Dynamic Communication for Smart Metering: Leading Edge for Sustainable Energy and PHEV The Game-Theoretic Approach to Pricing in China's Semi-Deregulated Electricity Market Regional Power Planning Optimization Model and Scenario Analysis Considering the Environmental Cost Research on Seamless Transfer Strategy of Micro-Grid Based on Energy Storage Control Methods and Techniques on GIC in Power Systems Impacts of Short-Term Generation Rights Transaction on Transmission Loss for Power System Operational Emission Reduction Capability of Regional Power System Reactive Power Optimization of Distribution System Incorporating Distributed Generations and Running Cost The Framework and Key Technologies of Power Grid Operation Track Oriented Automatic Smart Dispatch A Chance-Constrained Programming Model for the Optimal Stopping Decision of Power R&D Project Study on the Algorithm of Distribution Network Planning Containing Distributed Power Dynamic Simulation of a Microgrid with Renewable Microsources Based on DIgSILENT/PowerFactory Modeling and Simulation for Quantitative Assessment of Process Level Networks in Substation Based on OPNET Research of Building Safety Management System of Reply Protection in Power Company Based on Workflow Design and Implementation of Visualizing the Intelligent Dispatching and Maintenance Arrangement System for 110kV Power Grid Problem Analysis and Treatment Based on Condensate Polishing System in 600MW Unit of Power Plant Research on the Design and Test of Smart Substation OnLine Monitoring System Hierarchical Simulated Annealing-Reinforcement Learning Energy Management for Smart Grids Research on the Functional Framework and Business Model of Advanced Metering Infrastructure Health Assessment and Life Prediction of Transformer Study on Forecasting Model of Monthly Electricity Consumption Based on Kernel Partial Least-Squares and Exponential Smoothing Method Energy Performance Contracting and its Application in HVAC Chapter 9: Energy Chemical Engineering and Energy Materials Effect of PMMA and Graphene Addition on the Performances of Organic Solar Cells Effect of Bi Addition on the Electrochemical Behavior of Zinc Electrodes in Concentrated Alkaline Solutions Investigations of Hydrodynamics and Heat Transfers in a Modified Reactor Using Fluid Mixers Syngas Production via Carbon Dioxide Reforming of Methane in a Wall-Coated Monolith Reactor Preparation and Electrochemical Performance of LiFePO4/C Composite Research on Hydrocracking Reaction Conditions of Heavy Polycyclic Aromatic Hydrocarbon Experimental Investigation on Heat Transfer Characteristics of CO2-Based Foam Fracturing Fluid Technical Feasibility of Small-Scale GTL Process towards Heat Integration: A Case Study of Nongtum A Reservoir in Thailand Photocatalytic Hydrogen Production from Water Splitting on CdS and Cd0.8Zn0.2S Nanorods: Influence of Ni(OH)2 Modification CeO2/CuO Catalysts with Na2CO3 as Precipitant for Preferential Oxidation of CO Synthesis and Application of a Polyether Demulsifiers Analysis of Coke Oven Gas Dehydration Technology for Vehicles Experimental Study on Low-Temperature Carbonization of Low Rank Coal Fusibility Characteristics of Slag from Fluidized-Bed Gasification of Jincheng Anthracite Characterization of Multiblock Sulfonated Poly(Arylene Ether Sulfone) as Proton Exchange Membranes Cost of LNG-Fueled Container Vessels Self-Ordering Process of Hexagonal Cells in Porous Anodic TiO2 Nanotubes Theoretical Study on Reactivity of Cu-Based Oxygen Carrier for CO Chemical Looping Combustion Synthesis of Chiral Azobenzene and their Effect on Cholesteric Liquid Crystal Analysis on Toxic and Hazardous Substances of Polymer Surfactants Used in Oilfields Study on Electrochemical Impedance Spectrum Analysis of LiFePO4 in Aqueous Solutions by Using Powder Microelectrode Continuous Esterification of n-Butyl Acetate Catalyzed by Ionic Liquid Synthesis and Characterization of Poly(acrylic acid)/PVP Modified Bentonite Superabsorbent Polymer Synthesis on Spiropyran/ SrAl2O4:Eu2+,Dy3+ Photochromic Phosphor and its Solvent Effects Hydrothermal Modification Effect on the Catalyst for Etherification Research on Preparation and Application of High-Performance Hydrogenated Transformer Oil Improvement of Organic Loading Rate on Hydrogen Production Using Continuous Stirred Tank Experimental Study on Coal Chemical Looping Combustion Using CuFe2O4 as Oxygen Carrier Chapter 10: Energy Security, Management and Clean Use Study on the Explosion Characteristic Parameters of Gasoline Vapor Inerted by CO2 Study on Energy Structure and Energy Security in Inner Mongolia How Welfare Variables Influence Energy Consumption? - Evidence from Ecuador and Mexico Experimental Study on the Four Pipes Self-Supporting Steel Chimney Study on EGR Technology Routes of Vehicle Engine - A Review Prediction on China's Energy Demand Based on RBF Neural Network Model Study on Deoxidization of Coal-Bed Methane under Low Temperature Study on the Coal-Based Synfuels System Coupled with Nuclear Energy Construction of China's Energy Condition Index Synthesis and Properties of Hyperbranched Dispersant for High Concentration of CWS The Impact of Effective Expansion around on Energy Enterprise Value Study on China's Energy Demand Ridge Regression Prediction Based on Path Analysis Low-Temperature Pyrolysis Characteristics of Inner Mongolia Lignite Growth Evaluation of Listed Companies of China's New Energy Industry Research on China's Legal Protection System for Energy Security Analysis of Zhuzhou Energy Efficiency Based on DEA Experimental Study on the Environmental Behaviors of Poisonous Trace Elements in Post-Gasified Residues Comparative Analysis of Energy Consumption in Municipalities of China Study on Prediction of Coal Demand by the Improved Artificial Fish-Swarm Neural Network Gas Fractal Seepage Properties Research in Soft-Slicing Coal with Triaxial Pressure System Simulation Experiment for Gas Pipeline Leakage Detection Exergy Analysis of Energy Utilization for China's Railway Transport Enterprises, from 2006-2010 Chapter 11: Architecture, Construction Technology and Energy-Saving Technology The Study of Isolated Multi-Input Converter for Green Energy Application Unscrambling the Building Envelope Insulation Technique in "Tianjin Energy Efficiency Design Standard for Rural Residential Buildings" Research on Foundation Settlement of Oil Tank Project Based on Red Soil Foundation Applicability Research of Germany "Passive Housing" Technology in Hot Summer and Cold Winter Area in China Numerical Simulation on the Influence of Double-Jet Air Curtain of Smoke-Preventing in Tunnel Fires Synthesis and Properties of a Novel Environmentally Friendly Phase Change Energy Storage Coating Additive The Thermal Insulation Design for Refuge Chamber Comparison of Air Distribution of Induced Ventilation System's Different Exhaust Way in Underground Garage Environmental Impact Evaluation and Economy Analysis of Air-Conditioning Cold and Heat Source Based on TEWI Index Research on Demand Controlled Ventilation Strategy for Laboratory Ventilation System Dynamic Modeling and Simulation for Double Effect Absorption Refrigeration Using [mmim]DMP/CH3OH as Working Pairs Prediction of the Heat-Insulating Crumb Rubber Brick Walls Design by the Finite Element Method The Analysis of Green Building's outside Decoration Materials Effect of Micro-Grinding Medium on the Particle Size Distribution and Properties of Portland Cement Model Research on Comprehensive Efficiency Evaluation of Heating Reconstruction Project The Application of PC Technology in Public Buildings: A Case Study of Security Center in "Twelfth National Athletics" Thermal Behavior of Double Glass Window Filled with Absorbing and Non-Absorbing Gas A Study on the Current Status of House Performance Rating System of South Korea and Development Plan The Illumination Characteristics of Glass-Based Mazu Temple Buildings Compared to Traditional Temples in Taiwan Field Survey on Occupant Thermal Comfort of Cold Regions in Transition Season Chapter 12: New Energy Vehicles, Electric Vehicles Problems and Countermeasures in the Popularization of China's New Energy Vehicles Market Pure Electric Vehicle Driving State Data Collection Terminal Design and Telematics Applications Analysis on the Development of New Energy Vehicles in China Design and its Application of Hybrid Electric Vehicle Driving Status Data Acquisition Terminal A Fuzzy Logic Controller for Vehicle-Active Suspension Systems Three-Stage Precise Converter in EV Charging-Discharging-Storage Integration Station Online State-of-Charge Estimation of Li-Ion Battery Based on the Second-Order RC Model Study on Effect of Electric Vehicle Industry to Energy and Environment Enhanced Electrochemical Performance of [Ni4Al(OH)10]OH by Mechanically Blending Nanometric Zinc Oxide Charging and Discharging Control of Plug-In Electric Vehicle Based on Immune Clone Algorithm Evaluation Method of Regenerative Braking for Electric Vehicles Research on Driving Factors of Green Innovation in China's Auto Parts Manufacturing Enterprises State of Charge Estimation of Power Lithium-Ion Battery Based on Sliding Mode Observer Chapter 13: Machinery and Equipment for Industrial Manufacture Study on Cutting Tooth Strength of Spiral Drilling Shearer Based on LS-DYNA Research on Cavitation and Runaway Tests of Mixed-Flow Pump with Different Blade Angles The Design and Analysis on 200 Liters Large Material Barrels with Double L-Rings Effect on Position of Electromagnetic Stirring on Inclusion Behaviors in Billet Units Commitment Optimization of Pumping Station Based on Velocity Uniformity Analysis The Research on the Reliability Distribution Model of Wire Cut Electrical Discharge Machining Air Flow Simulation in High-Pressure Fan with Splitter Blade Study on Portable Multifunctional Laser Lighter Research of Feature Model Constructing Techniques for Diesel Engine Based on EON Platform Establishing Quality Evaluation System of Complete Sets of Equipment for Water Treatment Analysis and Modification on Blockage Problem of BBD Double Inlet and Outlet Tube Mill Separator The Study on the Top Clearance Plunger Pump in Diesel Engine Study on the Mechanism of Soot Reduction by Multi-Injection Coupled with EGR A Comparative Analysis of Different Cycle Diesel Engine Based on Three-Dimensional Simulation Assessment of the Fire Risk and Thermal Resistance of Tyres Design of Decanter System Floating Tank Lifting Type Analysis of 3D Printing Technology in China - Taking Avic Heavy Machinery Co.,Ltd (600765) as an Example Three-Dimensional Numerical Simulation of Fluid with Sparse Particles' Erosion to Pipelines Study on Diagnosis Method of High Back Pressure in Well Head for Circular Pipe Network Wind Load Simulation Test for the Vehicle Mounted Extensible Mast System High-Speed Data Acquisition System Based on MP424 Acquisition Card Experimental Research on Connection Performance of Variable-Pitch Threaded Casing A Study on Emissions of Small Diesel Engines Study on Heat Transfer and Resistance Characteristics of H-Type Finned Tube Numerical Modeling and Simulation of Pressure Wave in Combination Electronic Unit Pump High Pressure Pipeline Simulations of Waste Heat Recovery System Using R123 and R245fa for Heavy-Duty Diesel Engines Analysis of Exhausting Flue Gas Temperature Abnormal Accompanied with the Boiler Load Changing Experimental Study of Cu&Fe Molecular Sieve Catalyst for Urea-SCR After-Treatment System Research on Simulation for the Solenoid Valve Parameters of High-Power Electronic Controlled Diesel Engine Research of Virtual Prototype System on Aiming Device of Setting Screws in Acetabulum Anterior Column Design and Control of Genetic Algorithm-Based Multi-Station LED Chip Waxing Machine Study on Internal Combustion Engine Exhaust Noise by Orthogonal Test Numerical Study of Wakes on Downstream Effects in Static Cascade Flow Field to Simulation of Rotor Wake Performance Analyses of Adaptive Access Mechanism in IEEE 802.11 WLANs Numerical Optimization of Oilfield Heating Furnace Research Chapter 14: Modeling, Computational Technologies and Control in Industry Fault Detection of Carbide Anvil Based on Hurst Exponent and BP Neural Network Research on Experimentation of Real-Time Dynamic Scene Simulation Based on UML Study on Image Retrieval Based on Active Feedback The Location Model of the Electric Vehicle Charging Station Based on Simulated Annealing Algorithm Preprocessing and Feature Extraction, Coding, Matching Algorithm for Fingerprint Image Application of QR Code Rebuild Library Integration Community Research and Application of K-DOPS Algorithm in Virtual Maintenance Training System for Diesel Engine A Structure of Cognitive Unit for Survivable System A Semi-Parametric Model for Longitudinal Count Data A Hybrid Programming with C++ and Fortran for Geostatistical Modeling in Reservoirs Halcon-Based Optical Fiber Geometry Parameters Measurement Algorithm A Technology to Multi-Resolution Surface Reconstruction A Study on the Design of Context-Awareness Middleware for Enclosed Growth Management System Evaluation on Multicast Congestion Control Scheme Kernel Based Estimation for a Non-Homogeneous Poisson Processes Research and Implementation of Intelligent Transportation System at the Intersection Signal Lamp on FPGA Harvesting Analysis of a Predator-Prey System with Functional Response Contrast of Time-Frequency Analysis Methods and Fusion of Wigner-Ville Distribution and Wavelet Transform Design and Development of Refueling Training Simulation System for Multi-Types Aeroplane Research and Application of the Auto-Control Cooling System for the Diesel Engine Synchronization of Different Fractional Order Time-Delay Chaotic Systems Using Active Control

「Nielsen BookData」 より

関連文献: 1件中  1-1を表示

詳細情報

  • NII書誌ID(NCID)
    BB14817199
  • ISBN
    • 9783037858615
  • 出版国コード
    sz
  • タイトル言語コード
    eng
  • 本文言語コード
    eng
  • 出版地
    Durnten-Zurich
  • ページ数/冊数
    2 v. (1999 p.)
  • 大きさ
    24 cm
  • 親書誌ID
ページトップへ