Advanced engineering materials III : selected, peer reviewed papers from the 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), May 11-12, 2013, Zhangjiajie, China
Author(s)
Bibliographic Information
Advanced engineering materials III : selected, peer reviewed papers from the 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), May 11-12, 2013, Zhangjiajie, China
（Advanced materials research, v. 750-752）
Trans Tech Publications, c2013
- : [set]
- Part 1
- Part 2
- Part 3
Available at / 1 libraries
-
Part 1A25118/750-1400063397,
Part 2A25118/750-2400063400, Part 3A25118/750-3400063419 -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), May 11-12, 2013, Zhangjiajie, China.
The 498 papers are grouped as follows:
Chapter 1: Composites;
Chapter 2: Micro/Nano Materials;
Chapter 3: Iron and Steel;
Chapter 4: Ceramic;
Chapter 5: Metal Alloy Materials;
Chapter 6: Elastomers & Polymers;
Chapter 7: Optical/Electronic/Magnetic Materials;
Chapter 8: New Functional Materials;
Chapter 9: Environmental Friendly Materials and Environmental Engineering;
Chapter 10: Biomaterials, Microbiology and Biotechnology;
Chapter 11: Chemical Materials and Engineering;
Chapter 12: Thin Films and Membranes;
Chapter 13: Surface Engineering/Coatings;
Chapter 14: Other Areas of Materials Science.
Table of Contents
Preface and Conference Organization
Chapter 1: Composites
Preparation and Properties of PS/PP/Nano-TiO2 Composites
Mechanical Properties of Thermoplastic Composites via In Situ Polymerization from Cyclic Oligomers
A Multi-Scale Non-Deterministic Approach to Composite Curing Process Simulation
Study on Preparation and Properties of High Permeability Polyurethane Composites with Low Swelling
Numerical Simulation for the Thermo-Mechanical Coupling of Tubular Braided Carbon/Carbon Composites
Internal Stress Calculations of Continuous Fiber Reinforced Composites under Transverse Loads
The Thermo-Mechanical Coupling Analysis of SiCp/A356 Composites Brake Disc of a Passenger Car
Effects of MAPE Treatments on Thermal Properties of Silvergrass Reinforced High Density Polyethylene Composites
Effects of PMDI Modified on Physico-Mechanical Properties of Silvergrass Reinforced High Density Polyethylene Composites
Properties Characteristics of Silicone Inhibitors
The Bentonite Copolymer Composite for Removing Lead Ions
The Research Status, Superiorities and Prospect of Composite Insulation Materials in China
Conductive Polypyrrole/Polyurethane Composite Fibers for Chloroform Gas Detection
Research on CFRP Periscope Outer Tube
Thickness Swelling and Water Absorption Character of Laminate Floor
Preparation and Properties of C/SiC Composites via Liquid Silicon Infiltration Process
Judgment Method of Accelerated Testing Effects on Compound Friction Material
Sintering Properties of Fused Silica/Nano-Zirconia Composite Ceramic
Flame Retardancy and Mechanical Properties of Brominated Flame Retardant for Long Glass Fiber Reinforced Polypropylene Composites
Interface Reaction of CNTs/Al Composites Fabricated by High Energy Ball Milling
The Propagation of In-Plane Waves in Multilayered Elastic/Piezoelectric Composite Structures with Imperfect Interface
Hot Compression Performance of TiC10/Cu-Al2O3 Composite Prepared by Vacuum Hot-Pressed Sintering
Study on Pore Structure of Multi-Layered Spunbonded Nonwovens
Morphology, Dynamic Mechanical and Mechanical Properties of Long Glass Fiber Reinforced Polypropylene and Polyvinyl Chloride Composites
Preparation of 3D Honeycomb Basalt Fibers Woven Composites
SiCp/7050 Aluminum Matrix Composite Made by High-Energy Ultrasonic and Two Steps Casting Processing
Correlation between Curing Temperature and the Properties of Conductive Composites
Effect of Functionalized Multi-Walled Carbon Nanotubes on the Interfacial Properties of Ramie Fiber/Polylactic Acid (PLA) Composites
Effects of Functionalization MWCNTs on the Mechanical and Electrical Properties of nylon-6 Composites
Study on Properties of Carbon Nanotubes/Epoxy Resin Composite Prepared by In Situ Polymerization
PBA/P (MMA-MAH) Core-Shell Particles Toughening Reinforced PA6
Light-Weight and High Thermal Insulating EPDM Composites Modified with Pretreated Hollow Phenolic Micro-Spheres
Researches on Flame Retardation and Hygrothermal Aging Properties of PP/PA6/APP/OMMT Composites
Preparation of Laponite-Armored Polystyrene Particles by Pickering Emulsion Polymerization
Effects of Processing on Mechanical Properties of Polypropylene Composites
Synthesis and Characterization of CNT/Fe3O4-ZnS Nanocomposites
Mechanical Properties of Carbon/PEEK Composites According to the Fiber Ply Orientation and Sizing Removal of Carbon Fiber for Artificial Hip Joint
Moisture Deterioration Mechanism of Fiber Reinforced Composites
Mechanical Properties and Fracture Characterization of Al-5%wtMg Composite Reinforced with Carbon Nanotube
Isothermal Crystallization of PET/PTT-CNTs Composites
Characterizations of Liquid Polycabosilane (LPCS) Used as SiC Matrix Precursor for CLVD Process
Preparation of Polymer Composite Latex via Miniemulsion Polymerization: Fluorinated Acrylate as Co-Stabilizer and Functional Modifier
Estimation of the Elastic Modulus and Moisture Absorption of Sisal Fibre
Chapter 2: Micro / Nano Materials
A Review on Polymer/Kaolinite Nanocomposites
Hydrothermal Synthesis and Electrochemical Performance of WO3 Nanoparticles
Preparation and In Vitro Degradation of PLLA Super Fiber Membrane
Effect of Thermal Treatment on the Physical Properties of Electrospun PVDF/PMMA Composite Membrane
Flash Synthesis of Tetragonal-ZrO2 Nanostructures by Microwave-Induced Combustion Process
Synthesis and Characterization of Large Area Carbon Nanotubes Array
Fabrication of Porous Alumina Nanofibers with Hollow Structure by Single Capillary Electrospinning
Surfactant CTAB-Assisted Synthesis and Gas-Sensing Characteristics of SnO2 Nanomaterials
A Facile Non-Aqueous Approach for the Synthesis of Cu Nanowires
Controllable Preparation of Multishaped Micro/Nanosized Hydrated Nickel Molybdate via Chelator-Assisted Hydrothermal Route
Synthesis of ZnO Nanorod Arrays on Chaleted Sol-Gel-Derived ZnO Thin Films and its Optical Absorption in Visible-Light Region
Preparation of TiO2/CNT Composites and Effect of CNT's Structure on Morphology of Nano-TiO2
Synthesis of Carbon Nanofibers on Iron and Copper Catalysts by Chemical Vapor Deposition
Study on Needle and Needleless Electrospinning for Nanofibers
Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst
Effects of Reaction Conditions on Microstructures and Properties of Polyaniline Nanofibers through Interfacial Polymerization
Polyaniline Nanofibers Produced via Rapid Initiated Polymerization in a Binary Oxidant System
A Review of Nanostructured TiO2 Application in Li-Ion Batteries
Synthesis of Vanadium-Doped TiO2 Hollow Spheres and their Visible Light Photocatalytic Activity
Study on PS-Molybdophosphoric Composite Fibers via Electrospinning Process
Characterization and Photocatalytic Activity of TiO2 Nanoparticles with Precipitation Method Synthesis
Progress on Fabrication of Free-Standing and through-Hole TiO2 Nanotube Arrays
A Study of Optimum Conditions for Electrospinning Cellulose Acetate Nanofibers in Trifluoroacetic Acid Solvent
Simulation on the Dielectrophoretic Assembly of Carbon Nanotubes
Study on Morphology and Thermo-Mechanical Properties of Carbon Nanotube-Modified Polycarbonate
Novel Methods for Preparation and Surface Treatment of Nano-CaCO3
Synthesis and Characterization of Superparamagnetic Fe3O4 Nanoparticles
Technical Study on Microwave Method for the Preparation of Flower-Like ZnO
Characterization of Core-Shell Structure Palygorskite Modified by Nano-CaCO3 (PnC) Composite Particles
Fabrication of Micro-Structural ZnO Crystal and the Concentration Fields of the CVD Reactor
Chapter 3: Iron and Steel
Study on Bainitic Microstructure under Low Austempering Temperature and its Wear Resistance of Low-Alloy High-Carbon Steel
Research on Structural Inheritance Characteristic and the Related Normalizing Elimination Process for 300M Steel
Research on the Reverse Loading Hardening Model of the X80 Pipeline Steel
Physical Simulation of Inclusions Removal in 180t RH Degasser
Phase Transformation Behaviors of Nb-V-Ti Microalloyed Pipeline Steel X70
Study on Process of SPHC Steel Solidification
Effect of Temperature on Tribological Performances of Ion Nitrocarburized Layer of 42MnCr52 Steel
Effects of Nb on Martensite Size in B-Bearing Steel
Study on the Preparation of Carbon-Containing Pellets from the Mixed Ore of V-Ti Iron Concentrate and Titanium Concentrate
Study on Mixing Time in Bottom-Blowing Ladle with Immersed Tube
Cold Model Experiments and Mechanism on Inclusion Removal by Ultrasonic Horn
The Latest Development on the Heat Treatment, Microstructure and Mechanical Properties of Low-Carbon Martensite Steel
Study on Continuous Cooling Static Transformation Regularity of T700
Research on Continuous Cooling Dynamic Transformation of T700
Evaluation on the High-Temperature Oxidation Behavior of HP Steam Turbine Rotor Materials
Alloy Elements Added in Fe-6.5wt% Si Silicon Steel and their Effect on Ductility and Magnetic Properties
Control of Element and Inclusion for X80 Pipeline Steel
The Influence of Hot Rolling Process on the Performance of HG70C
Martensite Phase Transform during Nitrogen-Spray Water Jet Quenching
Development of Economic-Type X70 Linepipe Steel Hot Strip
Influence of Primary Austenite Dendrite on the Microstructure and Mechanical Properties of Gray Cast Iron
Thermal Analysis of Solidification Process and Mechanical Properties in Heavy Section Ductile Iron Casting
Dephosphorization by Slag Pour out in the Smelting for High Carbon 70 Steel
The Galvanic Corrosion Behaviors of 13Cr-N80 Steel Couples in NaCl Solution at Different Temperature
Dendrite Grow up Relations with Cooling Speed
Chapter 4: Ceramic
The Effect of Precipitate Agent in Co-Precipitation Synthesis Y3Al5O12 and Y3Fe5O12 Powders
Preparation of Mullite-Aluminum Titanate-Cordierite Multiphase Ceramics
Preparation of Ultrafine Zirconia Suspension Using Glutin-Urea Gelcasting System
Dielectric Properties of Na2O Doped Cao-B2O3-SiO2 System Glass-Ceramics
Two Morphologies of Tetragonal Phase in the MgO-PSZ Ceramics
Study on Defect Complexes in High-K Sr and Zr Co-Doped BaTiO3 Ceramics
Effect of Sintering Temperatures and Ba/Ti Ratio on Dielectric Properties of BaTiO3 Ceramic
Magnetic Properties and High Thermal Conductivity of Al2O3 Ceramics Prepared by Spark Plasma Sintering
Influence of Nano-Yb2O3, Nano-Nd2O3 and Nano-Dy2O3 on Sintering and Crystallization of Fused Quartz Ceramic Materials
Effect of Different Sintering Temperature on the Performance of Mullite-Corundum Refractory Materials
Improvement of Thermal Shock Resistance Performance of High Alumina Ceramic Filter Support
Fracture Mechanics Analysis of GI All-Ceramic Crowns
Changes of the Glass Structure in the Phase Splitting Process of Na2O-CaO-Al2O3-B2O3-SiO2-TiO2 System
Research in Toughening Wear-Resistant of Alumina Ceramic
Vickers Hardness of Multi-Wall Carbon Nanotube Reinforced Alumina
Effect of Addition of Al2O3-SiO2 Gel Powder on Strength of Al2O3-MgO Unfired Bricks
Effect of Addition of Fused Alumina Zirconia on the Properties of Unfired Al2O3-C Slide
Effects of Magnesia Fines on Physical Properties of Al2O3-MgO Unfired Bricks
The Study of CaO-SiO2-B2O3-Al2O3-La2O3 Glass Ceramics as Sealant for Planar Intermediate Temperature Solid Oxide Fuel Cells
Research and Characterization of CaO-SiO2-B2O3-Al2O3-La2O3 Sealant with Different Alumina for ITSOFC
Chapter 5: Metal Alloy Materials
Research Advancement of Porous Fiber Metals
Hot Deformation Behavior of as-Cast AZ61 Magnesium Alloy
Structural, Thermodynamics and Dynamics Properties of Fe-Ni Melts with Different EAM Models
Research Progress of Mg-Al Based Alloys
Influence of the Temperature on the Mechanical Properties and Fracture Surfaces of 93WNiFe Alloy
Effect of T6 Heat Treatment on Dry Sliding Frictional Wear Characteristics of Al-20Si-5Cu Alloy
Effect of Hydrogenation on Microstructure and Mechanical Properties of Ti-6Al-4V Titanium Alloy
Grain Refinement of Y in As-Cast Mg-Y Alloys
Influence of Aging Time on Mg-8Al-1Zn-3Ca Alloy
Microstructure and Mechanical Properties of Mg-12Gd-2Y-2Sm-0.5Zr Alloy
Preparation of CoCrFeNiCuMnSix High Entropy Alloys and their Microstructure and Properties
Effect of Al on Zn-Al Filler Metal Wettability on Pure Aluminum Surface
Effects of Hydrogen on Diffusion Bonding of TiAl-Based Intermetallics with Hydrogenated Ti6AI4V Alloy Interlayer Containing 0.5wt% Hydrogen
Study on Structure Properties Casted with Mg-Y-Nd-Gd-Zn-Zr Magnesium Alloy
The Effect of Sr Modification on the Microstructure and Properties of Mg2Si Reinforced Near-Eutectic Al-Si Alloy
Enhancement of Faceted Growth of Primary Al3Ni Phase in High Magnetic Field
Thermal Stress Variation of Titanium Alloy under Laser Radiation
RE-Boronizing below Beta Transus Temperature on TC4 Titanium Alloy Surface
Application Research of Al-Fe-P Master Alloy on Modifying ZL109 Alloys
High-Temperature Oxidation Behavior of Cu-20Ni-75Co Alloy
Effects of Ball Milling Time on the Microstructure and Mechanical Property of Cu90Al10 Alloy
Microstructure and Property Evolution of Cu90Zr10 Alloy in the Process of Mechanical Alloying
Study of Microstructure and Mechanical Properties of Extrued Spray Forming Al-8.5Fe-1.3V-1.7Si Alloy
Study on Performance of Beryllium Bronze's Stress Relaxation
Study of the Phases of Mg-Zn-La Magnesium Alloys at 150 DegreesC
Study on Oxidation Behavior of Beryllium Bronze
Influence of Stirring Time and Holding Time on Microstructure and Properties of the A356 Alloy Modified by Sc
Microstructures of AZ61 Magnesium Alloy Solidified via Ultrasonic Vibration Treatment
Effect of Cooling Rate on Microstructure of Semi-Solid AZ61 Slurry Produced via Ultrasonic Vibration Process
Wear Behavior of Cu-Based Composite under Different Electrical Currents
Organization and Performance of the Novel High Aluminum Zinc-Based Alloy
Effect of Fe on the Performance of Rare Earth Aluminum Conductor
Research of Resistance to High Temperature and Creep Resistant Magnesium Alloy
Damage and Fracture Mechanism of As-Cast Ti40 Titanium Alloy during Hot Compression
The Study on Fracture Behavior in Hot Compression of As-Cast Ti60 Titanium Alloy
First-Principles Investigations on Magnetic Properties in Off-Stoichiometric Ni2MnIn Magnetic Shape Memory Alloys
Structures and Undercooling Technology of Ag-28.1 wt.% Cu Eutectic Alloy
Corrosion Behavior of the Transient Liquid Phase Diffusion Bonding Joint of TiNi Shape Memory Alloy and Stainless Steel in Hanks' Solution
Research on Isothermal Phase Transformation Kinetics of TC21 Alloy
Study on Alloy Particles and its Deposited Metal Microstructure and Properties
Nanocrystalline Cu90Nb10 Alloy Produced by Mechanical Alloying
Microstructure and Corrosion Properties of Mg-Zn-Ca-Nd Alloy for Biomedical Application
Effects of Solution and Cryogenic Treatments on Microstructures and Mechanical Properties of AZ31 Alloy Tubes
The Corrosion Behavior of 07/09Cr2AlMoRE Used for Petro-Chemical Equipment
Effect of Melt Intensive Homogenization on Solidification Microstructure of 7075 Aluminium Alloy by Twin-Screw Stirring
Valence Electron Structures Analysis on Relationship of Cu Physical or Mechanical Properties and Vacancy
Chapter 6: Elastomers & Polymers
Synthesis and Properties of a Novel Polymeric Phosphate Flame Retardant
The Research Method and Performance Analysis of the Curing Process of E51-593 System and TDE85-593 System
Chapter 6: Elastomers & Polymers
Preparation and Property Studies of Core-Shell Structure Polyacrylate Microspheres for Plastisol
Miscibility Study of Chitosan and Methylcellulose Blends
Study on the Effect of the Temperature Rise of Rubber Compound on Tread Rubber Quality during Mixing Process
Plastics: The Discovery in the World and Development in China
Research on Mechanical Properties, Compatibility, Flame Retardancy, Hot-Air Ageing Resistance of Hydrogenated Nitrile-Butadiene Rubber/Chloroprene Rubber Blends
Toughening Modification of PA6 with Different Core-Shell Particles
Effect of Types of Antioxidants on Crosslink Density and Tensile Properties of Epoxidized Natural Rubber
Preparation for PTFE Hollow Fiber Membranes Used in Water Treatment and Optimization for its Extrusion Process
Magnetorheological Effect of NDI Polyurethane-Based MR Elastomers
Properties of Europium (III) Chelating Polymer Film
Experimental Study of the Characterization of Ultra-High Molecular Weight Polyethylene Fiber Plastic
Preparation and Characterization of poly(L-lactide) /poly ( -caprolactone) Composite Films for Food Packaging Application
The Crystallization Properties of PET Obtained by Using the Attapulgite-Supported Aluminum Oxide Hydroxide Catalyst
Synthesis and Characterization of PBA-P(MMA-HPMA) Core-Shell Latex Particles
Compatibilizing Modification of Polyethersulfone/Polycarbonate Blend
Synthesis and Mesomorphic Behavior of Chiral Liquid Crystalline Elastomers Derived from (S)-(-)-2-Methyl-1-Butanol
Chapter 7: Optical/Electronic/Magnetic Materials
Preparation and Nonlinear Optical Property of Triazole-Based Fluorene Functional Polymer
Hydrothermal Preparation and Characterization of ZnO with Various Morphologies for Dye-Sensitized Solar Cells
Synthesis of Zn0.2Ca0.8TiO3:0.1Pr3+ by Sol-Gel and its Luminescence Characterization
Anomalous Refractions Based on Photonic Band Modulation of Photonic Crystals
Design of Diffuse Reflection Composites and Study on Reflectivity Properties
Preparation and Characterization of Blue-Emitting (SrCaBa)3(PO4)2*SrCl2:Eu2+Phosphors
Hierarchical Porous Materials for Supercapacitors
The Preparation and Characterization of Novel Nonlinear Optical Active Dye
The Design of the Polymer Diffuse Material with Microstructure and the Research of the Reflection Properties of Materials
Synthesis and Millimeter Wave Attenuation Properties of the FeCl3-Graphite Intercalation Compound
Preparation and Luminescence Properties of ZnO-SiO2-B2O3-Na2O:Sm3+ Glass
Magnetic Phase Transition and Magnetic Proporties of LaFe11.6Si1.4Bx Compounds
Effect of Graphene Layer Number on the Performances of Graphene Nanosheets Counter Electrode for Dye-Sensitized Solar Cells
Temperature and Time-Resolved Dependence of Photoluminescence in InGaN Quantum Dots
Effect of La Contents on La-Doped Bi2Ti2O7 Dielectric Thin Films
Band-Tailored InAs/GaSb Superlattice in Infrared Application
Full-Potential Study of the Magneto-Optical Kerr Effect for AuMnSb and AuMnSn
Polycrystalline Silicon Films on SiO2 Substrate Treated by Excimer Laser Annealing
Space Charge Limited Current and Magnetoresistance in Si
Luminescent Properties of Eu2+-Activated SrAl2Si2O8 as an Potential Blue Phosphor for near UV LED Chips
Design for Amorphous Silicon Solar Cells
Influence of Substrate on Soft Magnetic Properties of Fe-Co-Si/Native Oxide Multilayer Films
High Efficiency Thin Film Silicon Solar Cells
Effect of Yttrium Oxide on the Viscosity and Crystallization of Borosilicate Glass at High Temperature
Anisotropic Magnetoresistance Effect: General Expression of AMR Ratio and Intuitive Explanation for Sign of AMR Ratio
Synthesis and Characterization of CdSe Nanocrystal Quantum Dots by Solution-Liquid-Solid Method
The Effect of the Horizontal Distance between the Permanent Magnets on the Levitation Force in Hybrid Magnetic Levitation System
Photoluminescent Characteristics of ZnS Quantum Dots Synthesized in Non-Aqueous-Phase
Polarization Properties of a Nano-Particle Array Grating on GaN-Based LED
Performance and Design of an SRM with Amorphous Stator
The PTCR Effect Induced by Grain Boundary Segregation in Acceptor
Enhanced Luminescence of Terbium Complexes with 2,3-Pyrazinedicarboxylate by Y(III) Doping
High Density Formation of Iron Nanodots on SiO2 Induced by Remote Hydrogen Plasma
Thermodynamic Performance Characteristics of a Regenerative Brayton Refrigeration Cycle Using Gd0.45Tb0.55 and Gd as the Working Substance
Microwave Dielectric Properties of Eu4Ti3O12 Ceramics via Sol-Gel Method
Surface Morphology and Magnetic Properties of CoFe2O4 Thin Films Prepared via Sol-Gel Method
Effect of the Conduction Type of Si (111) Substrates on the Performance of GaN MQW LED Epitaxial Films
Effects of Mg-Doping on Resistance Switching Property of MgxZn1-xO Thin Films Prepared by Sol-Gel Method
Effect of Mn Doping on Structural and Optical Properties of ZnO Thin Films Prepared on Glass Substrates by Sol-Gel Method
Study on the Crystallization Behavior of Ge2Sb2Te5 and Silicon Doped Ge2Sb2Te5 Films
Phase Transition of GeSbTe Thin Films Induced by Thermal Treatment and Laser Irradiation
Initial Surface Reactions Mechanisms of Atomic Layer Deposition TiO2 on H/Si(100)-2x1 Surface
Preparation and Performance of Silver Coated Copper Powder
Improved Efficiency in Organic Light Emitting Device with a Excton Confining Structure
Chapter 8: New Functional Materials
Preparation of Fe3O4-Coated Microsilica Composites via Chemical Reduction Method
Study on Synthesis and Characterization of Styrene-Maleic Anhydride Random Copolymer by Xylene
The Status-Quo and Prospect of the Self-Cleaning Glass
Palladium Supported on Functionalized Mesoporous Silica: Synthesis, Structure and Catalytic Properties in Suzuki-Miyaura Coupling Reactions
Synthesis and Characterization of Melamine Halogen Acid Salts and its Application as Flame Retardant
Preparation, Characterization and Photocatalytic Properties of Ag-Loaded Bi2WO6
Synthesis of Mesoporous Polyaniline-TiO2 Composite Microspheres for Gas Sensing Application
Syntheses, Characterization and Crystal Structure of Zn (II) Complex Constructed from Ferrocenedicarboxylic Acid
Preparation and Properties Investigation of Gadolinium Arylate/Hydrogenated Nitrile-Butadiene Rubber Composites
Effects of Process Parameters on the Particle Size Distribution of Graphene Oxide Aqueous Dispersion
SiO/C Composite Materials for Lithium-Ion Secondary Batteries
Preparation and Growth Characteristics of Mesocarbon Microbeads
Novel Copolymers of N-[(4-bromo-3,5- difluorine) phenyl] acryl- amide with Methyl Methacrylate: Synthesis, Characterization and Thermal Properties
Effects of In Situ Formation of Magnesium Aluminate Spinel on Performance of Modified Sizing Nozzle
Effects of Propargyl Alcohol on Electrochemical Behaviors of AZ91 Magnesium Alloy Anode in 3.5% NaCl Solution
Study of Thermodynamic Properties of Superhard w-BC2N
Physical and Electrochemical Properties of Lithium Iron Phosphate Synthesized by Gel-Solid State Reduction Method
Synthesis and Characterization of a Novel Phase Change Luminescence Materials
Preparation and Properties of Fluorinated Poly-Acrylate Emulsion with TPG as Co-Solvent
Synthesis of F-TiO2 Nanosheets and its Photocatalytic Oxidation of Benzene to Phenol
Synthesis and Characterization of a Novel Flame Retardant 1,2-Bis (dimelaminium of 1-nitro-3,5-diphospha-4-oxa-3,5-dihydroxy cyclohexane) Ethane and its Application in PP
Studies on Magnetorheological Elastomers for Isolators
Study of the Acoustical Mechanism of Nonwovens by Rank Method
Relationship between Fractal Dimension and Structure of Nonwovens
The Application of Thermal Analysis to Research on Energetic Materials
Research on Appropriate Additives of Recycling Ladle Lining Materials for Al2O3-SiC-C Iron Runner Castable
The Research Status of Spongy Composite in the Wound Dressings
N-Allyl-N-Methyl Piperidinium Bis(Trifluoromethanesulfonyl) Imide as a Co-Solvent in Li-Ion Batteries
First-Principles Calculation of the Electronic Structure of SrTiO3
Syntheses and Characterization of Chiral Branched-Arm Liquid Crystals-Basing on Isosorbide as Chiral Core
Thickness-Modulated One-Dimensional Periodic Phononic Crystal
Phase Change Materials Applied in Thermal Design
High Temperature Proton Conductors and its Preparation
High Temperature Proton Conductors Resarch and Application
Chapter 9: Environmental Friendly Materials and Environmental Engineering
Catalytic Synthesis of Benzyl Acetate by Anion Exchange Resin Supported Waugh-Type (NH4)6[MnMo9O32] * 8H2O
Catalytic Synthesis of Isoamyl Acetate by Ion Exchange Resin-Supported (NH4)6[MnMo9O32] * 8H2O with Waugh Structure
Green Preparation of an Environment-Responsive Polymer
The Composition of Biomass Cushion Packaging Material and the Study of its Influence on Product Performance
Plant Treatments of EAF Slag for its Use as Construction Materials
Elution Efficiency of Herbicides Polluted Soil Samples
Effect Parameters of Ozonation of Dicamba in Aqueous Solution
Characteristics of Cr (VI) Adsorption in Aqueous Solution by Wheat Straw
Effect of Different Parameters on Particle Diameters of Magnesium Salt Flame Retardants
Synthesis and Characterization of Novel Degradable Responsive Polyurethane Microsphere
Preparation and Photocatalytic Activity of Fe-Ce-N Tri-Doped TiO2 Catalysts
Kinetics Study on Catalytic Hydrolysis of CCl2F2 over Solid Acid MoO3/ZrO2
Comparation of Cu-Co-Mn Mixed Oxides and Hopcalite as Support in Synthesis of Diphenyl Carbonate by Oxidative Carbonylation of Phenol
Synthesis of Diphenyl Carbonate by Oxidative Carbonylation of Phenol with Pd-Co/Hopcalite
Study on the Adsorption Characteristic of Steel-Making Slag Haydite for Phosphorus
Solvothermal Synthesis of Carboxyl Functionalized Mesoporous Resins in Microfludic Chip for Water Treatments
Acceleration of the Degradation of Leachate with Introduced Microbes in Bioreactor Sanitary Landfill
Thermal Treatment of Coal-Gangue Activation and Influential Factors
Synthesis and Crystallization of Poly(butylenes succinate-block-butylene sebacate)
Biodegradability of Poly (butylene succinate) under Enzymatic Degradation
Study on Thermal Analysis Kinetics of Carbon Support
Solvent Recovery of Silica Aerogel Monoliths Synthesis and Adsorption of Trivalent Chromium Ions
PVP-Assisted Synthesis and Enhanced Photocatalytic Activity of Ag/Ag3PO4 Composites
Environment-Friendly Dry Vibration Refractories Used for Continuous Casting Tundish
Factors Influencing Coking Waste Water by Three-Dimensional Electrode
Fast Removal of Cu (II) from Aqueous Solutions by PET Nanofibrous Membrane Modified with Acryamide
Effect of Gelatin on Secondary Structure, Crystallinity and Swelling Behavior of Silk Fibroin - Gelatin Hydrogels and its Application in Controlled Release of Nitrogen
Enhanced Cu (II) Adsorption from Aqueous Solutions by Sawdust (Quercus mongolica) Pretreated by Ionic Liquid-Water Mixture
The Preparation and Characterization of ABC-Shaped Star Copolymer of MPEG-PCL-PBLG
Preparation and Characterization of Mesoporous Carbon Materials Based on Hard Coal-Tar Pitch
Overview on the Treatment Technology of Wastewater from Copper Mineral Processing (WCMP)
Research on the Technology and Mechanism of Inhibiting Stickies of Blanket by Enzyme Treatment
A New Green Process for Synthesising High Quality PLLA Materials
Isolation and Characterization of a Bacillus flexus Strain Used in Alkaline Wastewater Treatment
Alkali Lignin as a Carbonization Agent on the Thermal Degradation and Flame Retardancy of Intumescent Flame Retardant Coating
Application of Biochar for Phosphate Adsorption and Recovery from Wastewater
DSC Studies on the Dyeing Properties of PLA Fiber
The Preparation and Sunlight Activity of Nanocomposite Photocatalysts for Degradation of Methyl Orange Solution
The Application of Modified Nanometer Titanium Dioxide in Degradation of Methyl Orange Solution
Synthesis and Identification of Heavy Metal Lead Artificial Antigen
Orthogonal Optimization of Preparation of Aquasorb with Naked Oats Straw Fiber and Performance Research
Synthesis and Swelling Behaviors of Wheat Straw Cellulose-g-Poly (Potassium Acrylate)/PDMDAAC Amphoteric Semi-IPNs Superabsorbent Resin
The Preliminary Exploring on the Factors Affecting the Performance of Adsorption and Degradation Formaldehyde in Cotton Fabric Treated with Nano-TiO2 and Activated Carbon
Removal of Methyl Red from Aqueous Solution by Adsorption onto Mg-Al HTLc
The Study of Denitration and Mercury Removal from Flue Gas by Biomass Semi-Coke Absorbents
Feasibility Study on Coking Waste Water Treatment by Three-Dimensional Electrode
Evaluation the Influence of Soil Solution Chemistry on Soluble Nickel Toxicity to Bok Choy
Color Removal from Dyeing Wastewater by the Polymer of Epichlorohydrin-Ethylenediamine
RemoVal of As (V) from Drinking Water by Attapulgite Loaded with Fe (III) Adsorbent
Test Study on Combined Process of Clarification-Adsorption-Membrane Separation for Chemical Agent VX Polluted Surface Water Treatment
Chapter 10: Biomaterials, Microbiology and Biotechnology
Research of Key Techniques to Improve Quality and Yield in Inositol Production Process
Methods of Porous Biomedical Material Fabrication
Effect of Camptothecin on the Embryonic Development and Angiogenesis of Zebrafish Embryos
A Tunable pH-Responsive Nanomaterials for Cancer Delivery
The Basically Study on Arenga Engleri Fiber
Bioactive Component Extraction from Antrodia camphorata Fruiting Body on Artificial Agar Media
Selective Breeding of Oxygen-Tolerant and Oxalate-Degrading Lactic Acid Bacteria by Protoplast Fusion
A New Host-Guest Biomaterial Apply for DNA Sequence Electrochemical Detection
Optimization of Determination Conditions for Protease in Landfill
New Integration Technology on Preparation of Natural Seleniferous Rice Protein Peptide with Enzyme and Ultrasonic-Microwave Synergistic Technology
Parameter Optimization of Biodegradable Polymer Materials Degradation Model Based on ACO Algorithm
Expression and Purification of His-chIFN- and its Antiviral Activity Assay
Application of Chelating Agents as Cooking Aids in Bamboo Pulping
Anti-Fatigue Activity of Pecan Oil in Mice
Salidroside Inhibits Endogenous Hydrogen Peroxide Induced Cytotoxicity of Endothelial Cells
Improvement of Impaired Memory in Mice by Schisandrin
Novel Microwave Carbonization System for Coconut Shells
Protective Effect of Schisandrin on Hydrogen Peroxide-Induced Damage in PC12 Cells
Effects of Radix Platycodonis Polysaccharide on Expressions of IFN- , IL-4 and IL-5 in the Bronchoalveolar Lavage Fluid and Nf- in the Lung Tissue of Asthmatic Rats
Study on Purification of Tea Saponin by Foam Separation Method
Solid-Liquid Extraction Kinetics of Flavonoids from Okra (Abelmoschus esculentus l. Moench) Pods with Applicability Analysis
How to Represent Respiratory System take Pathology into Account
Chapter 10: Biomaterials, Microbiology and Biotechnology
Effects of Selenium Application in Soil on Formation of Iron Plaque outside Roots and Cadmium Uptake by Rice Plants
A New Rice Husk-Plastic Composite Powder Preparation Process for Selective Laser Sintering Fabrication
Effects of Zein on Film-Forming Ability and Properties of Wheat Gluten Films
Water Prehydrolysis of Moso Bamboo Dissolving Pulp
Extraction and Antioxidant Property In Vitro of Cordycepin in Artificially Cultivated Cordyceps Militaris
Modified Octyl-2-Cyanoacrylate Tissue Adhesive for the Closure of Long Surgical Incisions
Comparison of Porosity Improvement of Silk Fibroin Membrane Using Polyethylene Glycol and Glutaraldehyde for Increasing Oxygen Permeability
The Characterization of a New Antibacterial Polyurethane
Determination of Polyphenols in Lycopus lucidus Turcz by Capillary Electrophoresis with Electrochemical Detection
Study on Capillary Electrophoresis-Amperometric Detection Profiles from Propolis and its Medicinal Preparations
Isolation and Biological Activities of Citral from Sweet Orange Oil
The Formation of Plasma Acid at Atmospheric Pressure and its Application in Hydrolysis of Microcrystalline Cellulose
Dynamic Self-Assembly Process of a Designed Peptide
The Microstructure and Swelling Properties of Laminated HAp/CS Hydrogels
A Modified Hydrothermal Synthesis and Luminescence of Hydroxyapatite Doped with Ce3+ and Tb3+ Ions
PEG-PLGA Nanoparticle Modified by Transferrin Loading Doxorubicin: In Vitro and In Vivo Studies for Glioma
The Primary Investigation on Biological Effect of Mesoporous Bioactive Glass In Vivo
Cu Ion Release and Cell Damage Effect of Cu-Containing IUDs with Different Surface Areas of Copper
Viscosity of Gelatin Solution Containing Cationic Crosslinker
Decomposition of Hydroxyapatite in Hydroxyapatite/Zirconia Composites for Dental Applications
Study on Corrosion Property of Fluoride Treated Biodegradable AZ31 Magnesium Alloy
Synthesis of Poly(ethylene glycol) Derivatives
Research Progress of Molecular Imprinting Technology
Chapter 11: Chemical Materials and Engineering
Research and Evaluation of High Temperature Plugging Agent
Carbonization Regime Process of Coal Tar Refined Soft Pitch
TiO2 Nanotube Film as the Support of Platinum Electro-Catalyst with Enhanced Electrochemical Activity for Methanol Oxidation
Effects of Carriers on Amination of Ethanol to Acetonitrile over Catalysts Loaded with Cu
Numerical Simulation on the Preparation of Vinyl Acetate Catalyst in Fluidized Bed
Synthesis, Structures and Properties of Two New Three-Dimensional Ce(III) Coordination Polymers with 2,2'-Bipyridine-4,4'-Dicarboxylic Acid
Experimental Investigation on Coking Characteristics of China RP-3 Kerosene under High Temperature and Long-Duration Conditions
Modelling of a Monolithic Solid Oxide Fuel Cell
Analysis of Nitrogen Oxides Formation in CH4/Air Laminar Premixed Flame
Adsorption Property of MgAl-NO3 Layered Double Hydroxides to Methyl Orange
Study on a Novel Prerefining Catalyst for Hydrocracking Process
The Research of Mineralizers of the Silicon-chrome-Green Pigment
Synthesis, Characterization and Properties of Arylamine-Acetylene Bridged Tetrahedral Cobalt and Iron Carbonyl Clusters
Study on the Control of Super-Fine Aluminum Hydroxide Particle Size from Sodium Aluminate Solutions
Experiment Investigation on Spontaneous Combustion of Iron Sulfides' in Oil Tank
Synthesis and Crystal Structure of a Novel 3D Sm(III) Coordination Polymer with Mixed Ligands
Synthesis and Characterization of 4-Phenylethynylphthalic Anhydride
High Active Cu/SiO2 Catalyst Prepared by Hydrolysis-Polymerization Method for 2-Butanol Dehydrogenation
Dehydrogenation of Sec-Butanol to Methyl Ethyl Ketone over Cu-ZnO Catalysts Prepared by Different Methods: Coprecipitation and Physical Mixing
Structural and Elastic Properties of Antimony Triiodide from First-Principles Calculations
Preliminary Study on the New Dual-Bed Photocatalytic Hydrogen Production System
Electrochemical Performances of Li4Ti5-xAlxO12 (x=0.03, 0.05, 0.10) as Anode Materials for Lithium Ion Battery
Synthesis, Characterization, Optical and Electrochemical Properties of Multinuclear Cobaltadithiolene Complex Derivatives
Influence of Carbonization Conditions on Mg Ion Concentration in Mg (HCO3)2 Solution
Synthesis of Monolithic Macroporous Carbon Xerogels from Phenol, m-Cresol, Furfural and Phosphoric Acid by Sol-Gel Approach
Preparation of Highly Dispersed Pt Supported on -Al2O3 with Strong Electrostatic Adsorption
Preparation and Properties of Gadolinium Homoleptic Double-and Triple-Decker Complexes Containing Tetrabenzoporphyrin Ligand
Liquid-Phase Oxidation of Toluene to Benzoic Acid over Manganese Oxide Catalyst
Methanol Dehydrogenation to Formaldehyde over Zinc Oxide-Modified Sodium Carbonate
Preparation of Alcohol-Soluble Polyvinyl Butyral
Study on the Photocatalytic Properties with Different Ratio Films of ZnO:Fe2O3
Synthesis, Crystal Structure and Photoluminescent Properties of a New Uranium-Containing Silicotungstate
Oxidation Kinetics of Magnesium Sulfite in Presence of Synthesized Solid Catalyst
Density Functional Theory Study of Intermolecular Interaction between RDX and H2O
Study on Gasoline Combustion Dust with ASE and HPLC
Kinetics of Mesophase Sphere Formation of Toluene Soluble Fraction
Determination of Inductive Ignition Period and Activation Energy of Food Dust
Characterization of TiO2/ACF Preparation in Caprolactam Tetrabutyl Ammonium Bromide Ionic Liquid
Chapter 12: Thin Films and Membranes
The Magnetisc Study of the ZnO Thin Film with Defects
Kinetic Monte Carlo Simulation of Surfactant-Mediated Thin Film Growth
Influence of Ti Layer on the Structure and Properties of Al/Cu Thin Film
Effect of H2 on Microstructures and Properties of AlN Films Deposited by Reactive Magnetron Sputtering
Surface Modification of Parylene C Film and Application
The Influences of Oxygen Content on Microstructures and Optical Properties of Al2O3 Films Deposited by Oxygen Ion Beam Assisted Pulse Reactive Magnetron Sputtering
Preparation of SiO2/PMMA Organic-Inorganic Hybrid Membrane via Microemulsion Situ Polymerization Technology
Structure and Photoelectric Properties of Dy Doped CdS Polycrystalline Thin Films
Influence of Substrate Temperature on Properties of Transition Materials from Amorphous to Microcrystalline Silicon Prepared by VHF-PECVD
Temperature-Graded Ferroelectric Thin Films under Two Boundary Conditions
Preparation and Characterization of Electrospun PVDF/PMMA Composite Fibrous Membranes-Based Separator for Lithium-Ion Batteries
The Preparation and Property Research on Laponite-Poly (L-Lactide) Composite Film
Impacts of N2 Import into Reaction System on the Structures and Properties of the Graphite-Amorphous Carbon Films
The Structure and Properties Research on Poly(Lactide-Co-Trimethylene Carbonate) Film Prepared by Blow Molding
Preparation and Mechanical Properties Study of Blown Film from Star Copolymer of Poly(Epsilon-Caprolactone-co-L-Lactide)
Preparation of Polypropylene and Polysulfone Composite Ultrafiltration Membrane though Physical Coating Method
Morphology and Properties of a Series of PVDF Blend Membranes
Study on Preparation of Nano-Sized Iron Oxide Thin Films and its Modification
Study on the Key Technology of Membrane Roof Structure of Expo Axis in 2010 Shanghai World Expo
Research on Electroless Plating of Poly (Ethylene Terephthalate) Films by a New Palladiumfree Activation Process
Chapter 13: Surface Engineering/Coatings
Physico-Mechanical Properties of the Cr-C and Mo-C Coatings
Investigation of Surface Nanocrystallization by Pre-Forceing Rolling Technology
The Microstructure Inhomogeneity of the Laser Surface Hardened Layers
The Occurrence and Control of the Surface Defects of Color-Coated Sheets
Study on Electrochemical Corrosion Behavior Comparison between DLC and TiN Coatings under Different Corrosive Environment
Improved Wear and Corrosion Resistance of Ni-P Electroless Deposited Coating with RE Added
A Novel Method for the Measurement of Slight Wear
Applications of Spraying Technology in the Converter Hood
Effect of Rare Earth Cerium on the Synthesis and Wear-Resistance of Electroless Ni-P-PTFE Coatings
The Preparation and Microstructure of DLC Films Deposited through Plasma Electrodeposition in Water/Ethanol Solution
Microstructure and Erosion Resistance of Hot-Dip-Aluminized 3Cr13 Steel
Effect of Molybdate Bath Service Life on Corrosion Resistance of Conversion Coating Deposited on Hot Dip Galvanized Steel
Corrosion Protection of Molybdenum-Phosphorus Compounds Based Coating Formed on Hot Dip Galvanized Steel in a Cl- Ione Environment
Fabrication of Magnetic Cenosphere Deposited with Fe3O4 Nanoparticles by Hydrothermal Method
Hyper-Dispersant Modifier Prepared and Applied in Polyethylene Composites
Dynamic Simulation of Heating Situation of Spraying Powder
Effect of Ni on the Properties of a Laser Surface-Clad Fe-Based Alloy
Effect of Calendering Conditions on the Properties of Paper
Coating Nano-Nickel Film on Cenospheres by Magnetic Sputtering Method
Effects of Vanadium on Microstructure and Properties of a Fe-Cr-W-Mo-V Overlaying Alloy
The Effect of Different CeO2 Addition on Performance of Ni-WC Composite Coating by Vacuum Fusion Sintering
Preparation and Characterization of UV-Curable Talc/Acrylate Composite Coatings with Enhanced Flame-Retardancy
Electroless Nickel Plating on ME20M Magnesium Alloys with an Environmentally-Friendly Pretreatment
Effect of Stabilizers on Electromagnetic Property of Electroless Ni Coating on Aluminum Powder
Effect of Temperature Induced by Laser Irradiation Processing on Fatigue Damage Repairing for Copper Thin Film
A Newly Developed Self-Bonded SiC Refractory
Study of Metal Friction Materials Using Hot Press
Computational Simulation and Prototype Testing of Nanocoating on Products in Aerospace Industry
Microstructure and Oxidation Resistance of TiN Coatings
Electrochemical Impedance Spectroscopy Study of Nano-Materials Modified Fluorocarbon Coating of Metal Surface
Synthesis of Carbon Nanocoatings on YG8 Hardmetal Substrates in Oxygen-Acetylene Flame
Investigating the Application of Nanoscale Bilayers Assembly on Stainless Steel Plate to Evaporation Behavior
Mechanism and Experimental Research on Improvement in Conductive Performances of ZnO Coated Tourmaline Powder
Microstructure and Wear Resistance of ZrC Reinforced Metal Matrix Composite Coating by Gas Tungsten Arc Cladding
Effect of N2 Flow on Microstructure, Mechanical Properties and Oxidation Resistance of CrNx Coatings
Preparation of Ceramic Surface Hydrophobic Coating by Sol-Gel Method
Effect of MgO Coating on Whisker Preform Strength of Aluminum Matrix Composite Fabricated by Squeeze Casting
Study on Technology of Multi-Trace Overlapping and Rapid Prototype by Broad-Beam Laser Cladding
Chapter 14: Other Areas of Materials Science
Correlative Study of the Fabric Properties and the Shrinkage of Gather
The Application of New High-Strength Polyester Fiber Flexible Net for the End Coal Mining Through
Analysis on Development Status and Trend of Vehicle Materials Your
The Research on the Friction and Wear Behavior of FKM/NBR Blends under Water Lubrication
Pressure Measurements of Aluminized Explosives Detonation Front with Different Aluminum Particle Size
Failure Analysis on Boiler Industrial Extraction Steam Pipe
Constitutive Equation of 5Cr21Mn9Ni4N Valve Steel during Hot Compression
Corrosion Failure Analysis of a Colored Steel Plate Used as the Workshop Roof
Study and Evaluation on Dispersion of Molybdenum Disulfide in Aqueous Solution
Influence of the Cathodic Charging Current on Electrochemical Behaviors of X80 Steel in an Simulated Acidic Soil Solution
Theoretical Model Research of Metal Rubber Material
Research on Performance of the Cu-Based Friction Materials Repaired by Spark Plasma Sintering
A Preliminary Study on Preparation of MgAlON Refractory
A Nonlinear Viscoelastic and Micromechanical Damage Constitutive Model for Solid Propellant
Analysis of Fracture Behavior of Metal/Ceramic Functionally Graded Materials under Thermal Stress
Effect of Helium on Stabilizing Vacancy Configuration in Delta-Plutonium
Finite Element Analysis of Thermal Stress for Femoral Prosthesis
The Feasibility Study on Stability of the Propellant GLQ by Testing the Content of the Centralite in with Gas Chromatography Test
The Pore Structure Multifractal Research of Low Silicon Sinter
Phase Difference Technique for Material Classification by Using Tuning Fork with Piezoelectric Resonator
Cyclic Voltammetric Studies of the Behavior of Pb-0.3%Ag-0.06%Ca Rolled Alloy Anode during and after Zinc Electrowinning
Phase Composition Analysis of Recycled MgO-C Ladle Lining Materials
A Study on Suizhong 36-1 Oil Field Acid Sludge Formation Influence Factors
Jet Blast Resistance Experiment of Engineered Material Arresting System
QSPR Study on Gross Heat of Combustion of Nitro Aromatic Compounds Based on Genetic Algorithm
The Corrosion Failure Analysis of Plate Pipe for Plate Heat Exchanger
The Effect of Corrosion Inhibitor in Hydrofluoric Acid Medium
The Study on the Dynamic Response Performance of PEMFC Stack with Electrodeposited Pt/C-RuO2*xH2O Electrode
Calculation and Analysis of Multifractal Spectrum of Sinter Surface
Two Temperature Model Numerical Simulation and Analysis of Thermal Transport Process in Copper Film
Study on the Properties of the SPPs Self-Interference
Variation of Surface Tension of Water in High Magnetic Field
Research on the Relationship between Changes of Active Groups and Gaseous Products in Different Temperatures
Optimization of Shot-Peening Conditions and Wave Profiles to Improve Durability of Wave Cushion Spring
The Statement of Material Mix-Match in Jewelry Design
Development of the Woolen 48Nm Cashmere Yarn
The Effect of Steam Explosion Treatment on the Separation of Lotus Fiber
Research on Structure and Properties of Camel Wool
Antimicrobial Treatment of Bamboo Blending with Cotton Carpets Using Modified Chitosan
Development of Bamboo Charcoal Fiber Blended Anti-Ultraviolet Fabric
Study on Coiled Fiber Height Distribution of Variable Cashmere Surface
Production of Sugar Beet and Maize as Energy Crops in Saline Alkali Soil
Effects of 1-MCP and Controllable-Release SO2 Packaging on Cold Preservation of Grapes (C.V. Muscat Hamburg)
Adhesion Properties of Pigment Dyes Using Ultrasonic Energy
Influence of Fabric Textures on Pilling Performance of Wool Sweaters
Effect of Subsoiling Cultivation on Corn in Semi-Arid Region of Western Liaoning Province
Effect of Technology Factors on the Resin Impregnation Results of Poplar
by "Nielsen BookData"
