Advanced engineering materials III : selected, peer reviewed papers from the 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), May 11-12, 2013, Zhangjiajie, China

著者

    • International Conference on Advanced Engineering Materials and Technology
    • Bu, Jinglong
    • Kim, Yun-Hae

書誌事項

Advanced engineering materials III : selected, peer reviewed papers from the 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), May 11-12, 2013, Zhangjiajie, China

edited by Jinglong Bu and Yun-Hae Kim

(Advanced materials research, v. 750-752)

Trans Tech Publications, c2013

  • : [set]
  • Part 1
  • Part 2
  • Part 3

大学図書館所蔵 件 / 1

この図書・雑誌をさがす

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), May 11-12, 2013, Zhangjiajie, China. The 498 papers are grouped as follows: Chapter 1: Composites; Chapter 2: Micro/Nano Materials; Chapter 3: Iron and Steel; Chapter 4: Ceramic; Chapter 5: Metal Alloy Materials; Chapter 6: Elastomers & Polymers; Chapter 7: Optical/Electronic/Magnetic Materials; Chapter 8: New Functional Materials; Chapter 9: Environmental Friendly Materials and Environmental Engineering; Chapter 10: Biomaterials, Microbiology and Biotechnology; Chapter 11: Chemical Materials and Engineering; Chapter 12: Thin Films and Membranes; Chapter 13: Surface Engineering/Coatings; Chapter 14: Other Areas of Materials Science.

目次

Preface and Conference Organization Chapter 1: Composites Preparation and Properties of PS/PP/Nano-TiO2 Composites Mechanical Properties of Thermoplastic Composites via In Situ Polymerization from Cyclic Oligomers A Multi-Scale Non-Deterministic Approach to Composite Curing Process Simulation Study on Preparation and Properties of High Permeability Polyurethane Composites with Low Swelling Numerical Simulation for the Thermo-Mechanical Coupling of Tubular Braided Carbon/Carbon Composites Internal Stress Calculations of Continuous Fiber Reinforced Composites under Transverse Loads The Thermo-Mechanical Coupling Analysis of SiCp/A356 Composites Brake Disc of a Passenger Car Effects of MAPE Treatments on Thermal Properties of Silvergrass Reinforced High Density Polyethylene Composites Effects of PMDI Modified on Physico-Mechanical Properties of Silvergrass Reinforced High Density Polyethylene Composites Properties Characteristics of Silicone Inhibitors The Bentonite Copolymer Composite for Removing Lead Ions The Research Status, Superiorities and Prospect of Composite Insulation Materials in China Conductive Polypyrrole/Polyurethane Composite Fibers for Chloroform Gas Detection Research on CFRP Periscope Outer Tube Thickness Swelling and Water Absorption Character of Laminate Floor Preparation and Properties of C/SiC Composites via Liquid Silicon Infiltration Process Judgment Method of Accelerated Testing Effects on Compound Friction Material Sintering Properties of Fused Silica/Nano-Zirconia Composite Ceramic Flame Retardancy and Mechanical Properties of Brominated Flame Retardant for Long Glass Fiber Reinforced Polypropylene Composites Interface Reaction of CNTs/Al Composites Fabricated by High Energy Ball Milling The Propagation of In-Plane Waves in Multilayered Elastic/Piezoelectric Composite Structures with Imperfect Interface Hot Compression Performance of TiC10/Cu-Al2O3 Composite Prepared by Vacuum Hot-Pressed Sintering Study on Pore Structure of Multi-Layered Spunbonded Nonwovens Morphology, Dynamic Mechanical and Mechanical Properties of Long Glass Fiber Reinforced Polypropylene and Polyvinyl Chloride Composites Preparation of 3D Honeycomb Basalt Fibers Woven Composites SiCp/7050 Aluminum Matrix Composite Made by High-Energy Ultrasonic and Two Steps Casting Processing Correlation between Curing Temperature and the Properties of Conductive Composites Effect of Functionalized Multi-Walled Carbon Nanotubes on the Interfacial Properties of Ramie Fiber/Polylactic Acid (PLA) Composites Effects of Functionalization MWCNTs on the Mechanical and Electrical Properties of nylon-6 Composites Study on Properties of Carbon Nanotubes/Epoxy Resin Composite Prepared by In Situ Polymerization PBA/P (MMA-MAH) Core-Shell Particles Toughening Reinforced PA6 Light-Weight and High Thermal Insulating EPDM Composites Modified with Pretreated Hollow Phenolic Micro-Spheres Researches on Flame Retardation and Hygrothermal Aging Properties of PP/PA6/APP/OMMT Composites Preparation of Laponite-Armored Polystyrene Particles by Pickering Emulsion Polymerization Effects of Processing on Mechanical Properties of Polypropylene Composites Synthesis and Characterization of CNT/Fe3O4-ZnS Nanocomposites Mechanical Properties of Carbon/PEEK Composites According to the Fiber Ply Orientation and Sizing Removal of Carbon Fiber for Artificial Hip Joint Moisture Deterioration Mechanism of Fiber Reinforced Composites Mechanical Properties and Fracture Characterization of Al-5%wtMg Composite Reinforced with Carbon Nanotube Isothermal Crystallization of PET/PTT-CNTs Composites Characterizations of Liquid Polycabosilane (LPCS) Used as SiC Matrix Precursor for CLVD Process Preparation of Polymer Composite Latex via Miniemulsion Polymerization: Fluorinated Acrylate as Co-Stabilizer and Functional Modifier Estimation of the Elastic Modulus and Moisture Absorption of Sisal Fibre Chapter 2: Micro / Nano Materials A Review on Polymer/Kaolinite Nanocomposites Hydrothermal Synthesis and Electrochemical Performance of WO3 Nanoparticles Preparation and In Vitro Degradation of PLLA Super Fiber Membrane Effect of Thermal Treatment on the Physical Properties of Electrospun PVDF/PMMA Composite Membrane Flash Synthesis of Tetragonal-ZrO2 Nanostructures by Microwave-Induced Combustion Process Synthesis and Characterization of Large Area Carbon Nanotubes Array Fabrication of Porous Alumina Nanofibers with Hollow Structure by Single Capillary Electrospinning Surfactant CTAB-Assisted Synthesis and Gas-Sensing Characteristics of SnO2 Nanomaterials A Facile Non-Aqueous Approach for the Synthesis of Cu Nanowires Controllable Preparation of Multishaped Micro/Nanosized Hydrated Nickel Molybdate via Chelator-Assisted Hydrothermal Route Synthesis of ZnO Nanorod Arrays on Chaleted Sol-Gel-Derived ZnO Thin Films and its Optical Absorption in Visible-Light Region Preparation of TiO2/CNT Composites and Effect of CNT's Structure on Morphology of Nano-TiO2 Synthesis of Carbon Nanofibers on Iron and Copper Catalysts by Chemical Vapor Deposition Study on Needle and Needleless Electrospinning for Nanofibers Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst Effects of Reaction Conditions on Microstructures and Properties of Polyaniline Nanofibers through Interfacial Polymerization Polyaniline Nanofibers Produced via Rapid Initiated Polymerization in a Binary Oxidant System A Review of Nanostructured TiO2 Application in Li-Ion Batteries Synthesis of Vanadium-Doped TiO2 Hollow Spheres and their Visible Light Photocatalytic Activity Study on PS-Molybdophosphoric Composite Fibers via Electrospinning Process Characterization and Photocatalytic Activity of TiO2 Nanoparticles with Precipitation Method Synthesis Progress on Fabrication of Free-Standing and through-Hole TiO2 Nanotube Arrays A Study of Optimum Conditions for Electrospinning Cellulose Acetate Nanofibers in Trifluoroacetic Acid Solvent Simulation on the Dielectrophoretic Assembly of Carbon Nanotubes Study on Morphology and Thermo-Mechanical Properties of Carbon Nanotube-Modified Polycarbonate Novel Methods for Preparation and Surface Treatment of Nano-CaCO3 Synthesis and Characterization of Superparamagnetic Fe3O4 Nanoparticles Technical Study on Microwave Method for the Preparation of Flower-Like ZnO Characterization of Core-Shell Structure Palygorskite Modified by Nano-CaCO3 (PnC) Composite Particles Fabrication of Micro-Structural ZnO Crystal and the Concentration Fields of the CVD Reactor Chapter 3: Iron and Steel Study on Bainitic Microstructure under Low Austempering Temperature and its Wear Resistance of Low-Alloy High-Carbon Steel Research on Structural Inheritance Characteristic and the Related Normalizing Elimination Process for 300M Steel Research on the Reverse Loading Hardening Model of the X80 Pipeline Steel Physical Simulation of Inclusions Removal in 180t RH Degasser Phase Transformation Behaviors of Nb-V-Ti Microalloyed Pipeline Steel X70 Study on Process of SPHC Steel Solidification Effect of Temperature on Tribological Performances of Ion Nitrocarburized Layer of 42MnCr52 Steel Effects of Nb on Martensite Size in B-Bearing Steel Study on the Preparation of Carbon-Containing Pellets from the Mixed Ore of V-Ti Iron Concentrate and Titanium Concentrate Study on Mixing Time in Bottom-Blowing Ladle with Immersed Tube Cold Model Experiments and Mechanism on Inclusion Removal by Ultrasonic Horn The Latest Development on the Heat Treatment, Microstructure and Mechanical Properties of Low-Carbon Martensite Steel Study on Continuous Cooling Static Transformation Regularity of T700 Research on Continuous Cooling Dynamic Transformation of T700 Evaluation on the High-Temperature Oxidation Behavior of HP Steam Turbine Rotor Materials Alloy Elements Added in Fe-6.5wt% Si Silicon Steel and their Effect on Ductility and Magnetic Properties Control of Element and Inclusion for X80 Pipeline Steel The Influence of Hot Rolling Process on the Performance of HG70C Martensite Phase Transform during Nitrogen-Spray Water Jet Quenching Development of Economic-Type X70 Linepipe Steel Hot Strip Influence of Primary Austenite Dendrite on the Microstructure and Mechanical Properties of Gray Cast Iron Thermal Analysis of Solidification Process and Mechanical Properties in Heavy Section Ductile Iron Casting Dephosphorization by Slag Pour out in the Smelting for High Carbon 70 Steel The Galvanic Corrosion Behaviors of 13Cr-N80 Steel Couples in NaCl Solution at Different Temperature Dendrite Grow up Relations with Cooling Speed Chapter 4: Ceramic The Effect of Precipitate Agent in Co-Precipitation Synthesis Y3Al5O12 and Y3Fe5O12 Powders Preparation of Mullite-Aluminum Titanate-Cordierite Multiphase Ceramics Preparation of Ultrafine Zirconia Suspension Using Glutin-Urea Gelcasting System Dielectric Properties of Na2O Doped Cao-B2O3-SiO2 System Glass-Ceramics Two Morphologies of Tetragonal Phase in the MgO-PSZ Ceramics Study on Defect Complexes in High-K Sr and Zr Co-Doped BaTiO3 Ceramics Effect of Sintering Temperatures and Ba/Ti Ratio on Dielectric Properties of BaTiO3 Ceramic Magnetic Properties and High Thermal Conductivity of Al2O3 Ceramics Prepared by Spark Plasma Sintering Influence of Nano-Yb2O3, Nano-Nd2O3 and Nano-Dy2O3 on Sintering and Crystallization of Fused Quartz Ceramic Materials Effect of Different Sintering Temperature on the Performance of Mullite-Corundum Refractory Materials Improvement of Thermal Shock Resistance Performance of High Alumina Ceramic Filter Support Fracture Mechanics Analysis of GI All-Ceramic Crowns Changes of the Glass Structure in the Phase Splitting Process of Na2O-CaO-Al2O3-B2O3-SiO2-TiO2 System Research in Toughening Wear-Resistant of Alumina Ceramic Vickers Hardness of Multi-Wall Carbon Nanotube Reinforced Alumina Effect of Addition of Al2O3-SiO2 Gel Powder on Strength of Al2O3-MgO Unfired Bricks Effect of Addition of Fused Alumina Zirconia on the Properties of Unfired Al2O3-C Slide Effects of Magnesia Fines on Physical Properties of Al2O3-MgO Unfired Bricks The Study of CaO-SiO2-B2O3-Al2O3-La2O3 Glass Ceramics as Sealant for Planar Intermediate Temperature Solid Oxide Fuel Cells Research and Characterization of CaO-SiO2-B2O3-Al2O3-La2O3 Sealant with Different Alumina for ITSOFC Chapter 5: Metal Alloy Materials Research Advancement of Porous Fiber Metals Hot Deformation Behavior of as-Cast AZ61 Magnesium Alloy Structural, Thermodynamics and Dynamics Properties of Fe-Ni Melts with Different EAM Models Research Progress of Mg-Al Based Alloys Influence of the Temperature on the Mechanical Properties and Fracture Surfaces of 93WNiFe Alloy Effect of T6 Heat Treatment on Dry Sliding Frictional Wear Characteristics of Al-20Si-5Cu Alloy Effect of Hydrogenation on Microstructure and Mechanical Properties of Ti-6Al-4V Titanium Alloy Grain Refinement of Y in As-Cast Mg-Y Alloys Influence of Aging Time on Mg-8Al-1Zn-3Ca Alloy Microstructure and Mechanical Properties of Mg-12Gd-2Y-2Sm-0.5Zr Alloy Preparation of CoCrFeNiCuMnSix High Entropy Alloys and their Microstructure and Properties Effect of Al on Zn-Al Filler Metal Wettability on Pure Aluminum Surface Effects of Hydrogen on Diffusion Bonding of TiAl-Based Intermetallics with Hydrogenated Ti6AI4V Alloy Interlayer Containing 0.5wt% Hydrogen Study on Structure Properties Casted with Mg-Y-Nd-Gd-Zn-Zr Magnesium Alloy The Effect of Sr Modification on the Microstructure and Properties of Mg2Si Reinforced Near-Eutectic Al-Si Alloy Enhancement of Faceted Growth of Primary Al3Ni Phase in High Magnetic Field Thermal Stress Variation of Titanium Alloy under Laser Radiation RE-Boronizing below Beta Transus Temperature on TC4 Titanium Alloy Surface Application Research of Al-Fe-P Master Alloy on Modifying ZL109 Alloys High-Temperature Oxidation Behavior of Cu-20Ni-75Co Alloy Effects of Ball Milling Time on the Microstructure and Mechanical Property of Cu90Al10 Alloy Microstructure and Property Evolution of Cu90Zr10 Alloy in the Process of Mechanical Alloying Study of Microstructure and Mechanical Properties of Extrued Spray Forming Al-8.5Fe-1.3V-1.7Si Alloy Study on Performance of Beryllium Bronze's Stress Relaxation Study of the Phases of Mg-Zn-La Magnesium Alloys at 150 DegreesC Study on Oxidation Behavior of Beryllium Bronze Influence of Stirring Time and Holding Time on Microstructure and Properties of the A356 Alloy Modified by Sc Microstructures of AZ61 Magnesium Alloy Solidified via Ultrasonic Vibration Treatment Effect of Cooling Rate on Microstructure of Semi-Solid AZ61 Slurry Produced via Ultrasonic Vibration Process Wear Behavior of Cu-Based Composite under Different Electrical Currents Organization and Performance of the Novel High Aluminum Zinc-Based Alloy Effect of Fe on the Performance of Rare Earth Aluminum Conductor Research of Resistance to High Temperature and Creep Resistant Magnesium Alloy Damage and Fracture Mechanism of As-Cast Ti40 Titanium Alloy during Hot Compression The Study on Fracture Behavior in Hot Compression of As-Cast Ti60 Titanium Alloy First-Principles Investigations on Magnetic Properties in Off-Stoichiometric Ni2MnIn Magnetic Shape Memory Alloys Structures and Undercooling Technology of Ag-28.1 wt.% Cu Eutectic Alloy Corrosion Behavior of the Transient Liquid Phase Diffusion Bonding Joint of TiNi Shape Memory Alloy and Stainless Steel in Hanks' Solution Research on Isothermal Phase Transformation Kinetics of TC21 Alloy Study on Alloy Particles and its Deposited Metal Microstructure and Properties Nanocrystalline Cu90Nb10 Alloy Produced by Mechanical Alloying Microstructure and Corrosion Properties of Mg-Zn-Ca-Nd Alloy for Biomedical Application Effects of Solution and Cryogenic Treatments on Microstructures and Mechanical Properties of AZ31 Alloy Tubes The Corrosion Behavior of 07/09Cr2AlMoRE Used for Petro-Chemical Equipment Effect of Melt Intensive Homogenization on Solidification Microstructure of 7075 Aluminium Alloy by Twin-Screw Stirring Valence Electron Structures Analysis on Relationship of Cu Physical or Mechanical Properties and Vacancy Chapter 6: Elastomers & Polymers Synthesis and Properties of a Novel Polymeric Phosphate Flame Retardant The Research Method and Performance Analysis of the Curing Process of E51-593 System and TDE85-593 System Chapter 6: Elastomers & Polymers Preparation and Property Studies of Core-Shell Structure Polyacrylate Microspheres for Plastisol Miscibility Study of Chitosan and Methylcellulose Blends Study on the Effect of the Temperature Rise of Rubber Compound on Tread Rubber Quality during Mixing Process Plastics: The Discovery in the World and Development in China Research on Mechanical Properties, Compatibility, Flame Retardancy, Hot-Air Ageing Resistance of Hydrogenated Nitrile-Butadiene Rubber/Chloroprene Rubber Blends Toughening Modification of PA6 with Different Core-Shell Particles Effect of Types of Antioxidants on Crosslink Density and Tensile Properties of Epoxidized Natural Rubber Preparation for PTFE Hollow Fiber Membranes Used in Water Treatment and Optimization for its Extrusion Process Magnetorheological Effect of NDI Polyurethane-Based MR Elastomers Properties of Europium (III) Chelating Polymer Film Experimental Study of the Characterization of Ultra-High Molecular Weight Polyethylene Fiber Plastic Preparation and Characterization of poly(L-lactide) /poly ( -caprolactone) Composite Films for Food Packaging Application The Crystallization Properties of PET Obtained by Using the Attapulgite-Supported Aluminum Oxide Hydroxide Catalyst Synthesis and Characterization of PBA-P(MMA-HPMA) Core-Shell Latex Particles Compatibilizing Modification of Polyethersulfone/Polycarbonate Blend Synthesis and Mesomorphic Behavior of Chiral Liquid Crystalline Elastomers Derived from (S)-(-)-2-Methyl-1-Butanol Chapter 7: Optical/Electronic/Magnetic Materials Preparation and Nonlinear Optical Property of Triazole-Based Fluorene Functional Polymer Hydrothermal Preparation and Characterization of ZnO with Various Morphologies for Dye-Sensitized Solar Cells Synthesis of Zn0.2Ca0.8TiO3:0.1Pr3+ by Sol-Gel and its Luminescence Characterization Anomalous Refractions Based on Photonic Band Modulation of Photonic Crystals Design of Diffuse Reflection Composites and Study on Reflectivity Properties Preparation and Characterization of Blue-Emitting (SrCaBa)3(PO4)2*SrCl2:Eu2+Phosphors Hierarchical Porous Materials for Supercapacitors The Preparation and Characterization of Novel Nonlinear Optical Active Dye The Design of the Polymer Diffuse Material with Microstructure and the Research of the Reflection Properties of Materials Synthesis and Millimeter Wave Attenuation Properties of the FeCl3-Graphite Intercalation Compound Preparation and Luminescence Properties of ZnO-SiO2-B2O3-Na2O:Sm3+ Glass Magnetic Phase Transition and Magnetic Proporties of LaFe11.6Si1.4Bx Compounds Effect of Graphene Layer Number on the Performances of Graphene Nanosheets Counter Electrode for Dye-Sensitized Solar Cells Temperature and Time-Resolved Dependence of Photoluminescence in InGaN Quantum Dots Effect of La Contents on La-Doped Bi2Ti2O7 Dielectric Thin Films Band-Tailored InAs/GaSb Superlattice in Infrared Application Full-Potential Study of the Magneto-Optical Kerr Effect for AuMnSb and AuMnSn Polycrystalline Silicon Films on SiO2 Substrate Treated by Excimer Laser Annealing Space Charge Limited Current and Magnetoresistance in Si Luminescent Properties of Eu2+-Activated SrAl2Si2O8 as an Potential Blue Phosphor for near UV LED Chips Design for Amorphous Silicon Solar Cells Influence of Substrate on Soft Magnetic Properties of Fe-Co-Si/Native Oxide Multilayer Films High Efficiency Thin Film Silicon Solar Cells Effect of Yttrium Oxide on the Viscosity and Crystallization of Borosilicate Glass at High Temperature Anisotropic Magnetoresistance Effect: General Expression of AMR Ratio and Intuitive Explanation for Sign of AMR Ratio Synthesis and Characterization of CdSe Nanocrystal Quantum Dots by Solution-Liquid-Solid Method The Effect of the Horizontal Distance between the Permanent Magnets on the Levitation Force in Hybrid Magnetic Levitation System Photoluminescent Characteristics of ZnS Quantum Dots Synthesized in Non-Aqueous-Phase Polarization Properties of a Nano-Particle Array Grating on GaN-Based LED Performance and Design of an SRM with Amorphous Stator The PTCR Effect Induced by Grain Boundary Segregation in Acceptor Enhanced Luminescence of Terbium Complexes with 2,3-Pyrazinedicarboxylate by Y(III) Doping High Density Formation of Iron Nanodots on SiO2 Induced by Remote Hydrogen Plasma Thermodynamic Performance Characteristics of a Regenerative Brayton Refrigeration Cycle Using Gd0.45Tb0.55 and Gd as the Working Substance Microwave Dielectric Properties of Eu4Ti3O12 Ceramics via Sol-Gel Method Surface Morphology and Magnetic Properties of CoFe2O4 Thin Films Prepared via Sol-Gel Method Effect of the Conduction Type of Si (111) Substrates on the Performance of GaN MQW LED Epitaxial Films Effects of Mg-Doping on Resistance Switching Property of MgxZn1-xO Thin Films Prepared by Sol-Gel Method Effect of Mn Doping on Structural and Optical Properties of ZnO Thin Films Prepared on Glass Substrates by Sol-Gel Method Study on the Crystallization Behavior of Ge2Sb2Te5 and Silicon Doped Ge2Sb2Te5 Films Phase Transition of GeSbTe Thin Films Induced by Thermal Treatment and Laser Irradiation Initial Surface Reactions Mechanisms of Atomic Layer Deposition TiO2 on H/Si(100)-2x1 Surface Preparation and Performance of Silver Coated Copper Powder Improved Efficiency in Organic Light Emitting Device with a Excton Confining Structure Chapter 8: New Functional Materials Preparation of Fe3O4-Coated Microsilica Composites via Chemical Reduction Method Study on Synthesis and Characterization of Styrene-Maleic Anhydride Random Copolymer by Xylene The Status-Quo and Prospect of the Self-Cleaning Glass Palladium Supported on Functionalized Mesoporous Silica: Synthesis, Structure and Catalytic Properties in Suzuki-Miyaura Coupling Reactions Synthesis and Characterization of Melamine Halogen Acid Salts and its Application as Flame Retardant Preparation, Characterization and Photocatalytic Properties of Ag-Loaded Bi2WO6 Synthesis of Mesoporous Polyaniline-TiO2 Composite Microspheres for Gas Sensing Application Syntheses, Characterization and Crystal Structure of Zn (II) Complex Constructed from Ferrocenedicarboxylic Acid Preparation and Properties Investigation of Gadolinium Arylate/Hydrogenated Nitrile-Butadiene Rubber Composites Effects of Process Parameters on the Particle Size Distribution of Graphene Oxide Aqueous Dispersion SiO/C Composite Materials for Lithium-Ion Secondary Batteries Preparation and Growth Characteristics of Mesocarbon Microbeads Novel Copolymers of N-[(4-bromo-3,5- difluorine) phenyl] acryl- amide with Methyl Methacrylate: Synthesis, Characterization and Thermal Properties Effects of In Situ Formation of Magnesium Aluminate Spinel on Performance of Modified Sizing Nozzle Effects of Propargyl Alcohol on Electrochemical Behaviors of AZ91 Magnesium Alloy Anode in 3.5% NaCl Solution Study of Thermodynamic Properties of Superhard w-BC2N Physical and Electrochemical Properties of Lithium Iron Phosphate Synthesized by Gel-Solid State Reduction Method Synthesis and Characterization of a Novel Phase Change Luminescence Materials Preparation and Properties of Fluorinated Poly-Acrylate Emulsion with TPG as Co-Solvent Synthesis of F-TiO2 Nanosheets and its Photocatalytic Oxidation of Benzene to Phenol Synthesis and Characterization of a Novel Flame Retardant 1,2-Bis (dimelaminium of 1-nitro-3,5-diphospha-4-oxa-3,5-dihydroxy cyclohexane) Ethane and its Application in PP Studies on Magnetorheological Elastomers for Isolators Study of the Acoustical Mechanism of Nonwovens by Rank Method Relationship between Fractal Dimension and Structure of Nonwovens The Application of Thermal Analysis to Research on Energetic Materials Research on Appropriate Additives of Recycling Ladle Lining Materials for Al2O3-SiC-C Iron Runner Castable The Research Status of Spongy Composite in the Wound Dressings N-Allyl-N-Methyl Piperidinium Bis(Trifluoromethanesulfonyl) Imide as a Co-Solvent in Li-Ion Batteries First-Principles Calculation of the Electronic Structure of SrTiO3 Syntheses and Characterization of Chiral Branched-Arm Liquid Crystals-Basing on Isosorbide as Chiral Core Thickness-Modulated One-Dimensional Periodic Phononic Crystal Phase Change Materials Applied in Thermal Design High Temperature Proton Conductors and its Preparation High Temperature Proton Conductors Resarch and Application Chapter 9: Environmental Friendly Materials and Environmental Engineering Catalytic Synthesis of Benzyl Acetate by Anion Exchange Resin Supported Waugh-Type (NH4)6[MnMo9O32] * 8H2O Catalytic Synthesis of Isoamyl Acetate by Ion Exchange Resin-Supported (NH4)6[MnMo9O32] * 8H2O with Waugh Structure Green Preparation of an Environment-Responsive Polymer The Composition of Biomass Cushion Packaging Material and the Study of its Influence on Product Performance Plant Treatments of EAF Slag for its Use as Construction Materials Elution Efficiency of Herbicides Polluted Soil Samples Effect Parameters of Ozonation of Dicamba in Aqueous Solution Characteristics of Cr (VI) Adsorption in Aqueous Solution by Wheat Straw Effect of Different Parameters on Particle Diameters of Magnesium Salt Flame Retardants Synthesis and Characterization of Novel Degradable Responsive Polyurethane Microsphere Preparation and Photocatalytic Activity of Fe-Ce-N Tri-Doped TiO2 Catalysts Kinetics Study on Catalytic Hydrolysis of CCl2F2 over Solid Acid MoO3/ZrO2 Comparation of Cu-Co-Mn Mixed Oxides and Hopcalite as Support in Synthesis of Diphenyl Carbonate by Oxidative Carbonylation of Phenol Synthesis of Diphenyl Carbonate by Oxidative Carbonylation of Phenol with Pd-Co/Hopcalite Study on the Adsorption Characteristic of Steel-Making Slag Haydite for Phosphorus Solvothermal Synthesis of Carboxyl Functionalized Mesoporous Resins in Microfludic Chip for Water Treatments Acceleration of the Degradation of Leachate with Introduced Microbes in Bioreactor Sanitary Landfill Thermal Treatment of Coal-Gangue Activation and Influential Factors Synthesis and Crystallization of Poly(butylenes succinate-block-butylene sebacate) Biodegradability of Poly (butylene succinate) under Enzymatic Degradation Study on Thermal Analysis Kinetics of Carbon Support Solvent Recovery of Silica Aerogel Monoliths Synthesis and Adsorption of Trivalent Chromium Ions PVP-Assisted Synthesis and Enhanced Photocatalytic Activity of Ag/Ag3PO4 Composites Environment-Friendly Dry Vibration Refractories Used for Continuous Casting Tundish Factors Influencing Coking Waste Water by Three-Dimensional Electrode Fast Removal of Cu (II) from Aqueous Solutions by PET Nanofibrous Membrane Modified with Acryamide Effect of Gelatin on Secondary Structure, Crystallinity and Swelling Behavior of Silk Fibroin - Gelatin Hydrogels and its Application in Controlled Release of Nitrogen Enhanced Cu (II) Adsorption from Aqueous Solutions by Sawdust (Quercus mongolica) Pretreated by Ionic Liquid-Water Mixture The Preparation and Characterization of ABC-Shaped Star Copolymer of MPEG-PCL-PBLG Preparation and Characterization of Mesoporous Carbon Materials Based on Hard Coal-Tar Pitch Overview on the Treatment Technology of Wastewater from Copper Mineral Processing (WCMP) Research on the Technology and Mechanism of Inhibiting Stickies of Blanket by Enzyme Treatment A New Green Process for Synthesising High Quality PLLA Materials Isolation and Characterization of a Bacillus flexus Strain Used in Alkaline Wastewater Treatment Alkali Lignin as a Carbonization Agent on the Thermal Degradation and Flame Retardancy of Intumescent Flame Retardant Coating Application of Biochar for Phosphate Adsorption and Recovery from Wastewater DSC Studies on the Dyeing Properties of PLA Fiber The Preparation and Sunlight Activity of Nanocomposite Photocatalysts for Degradation of Methyl Orange Solution The Application of Modified Nanometer Titanium Dioxide in Degradation of Methyl Orange Solution Synthesis and Identification of Heavy Metal Lead Artificial Antigen Orthogonal Optimization of Preparation of Aquasorb with Naked Oats Straw Fiber and Performance Research Synthesis and Swelling Behaviors of Wheat Straw Cellulose-g-Poly (Potassium Acrylate)/PDMDAAC Amphoteric Semi-IPNs Superabsorbent Resin The Preliminary Exploring on the Factors Affecting the Performance of Adsorption and Degradation Formaldehyde in Cotton Fabric Treated with Nano-TiO2 and Activated Carbon Removal of Methyl Red from Aqueous Solution by Adsorption onto Mg-Al HTLc The Study of Denitration and Mercury Removal from Flue Gas by Biomass Semi-Coke Absorbents Feasibility Study on Coking Waste Water Treatment by Three-Dimensional Electrode Evaluation the Influence of Soil Solution Chemistry on Soluble Nickel Toxicity to Bok Choy Color Removal from Dyeing Wastewater by the Polymer of Epichlorohydrin-Ethylenediamine RemoVal of As (V) from Drinking Water by Attapulgite Loaded with Fe (III) Adsorbent Test Study on Combined Process of Clarification-Adsorption-Membrane Separation for Chemical Agent VX Polluted Surface Water Treatment Chapter 10: Biomaterials, Microbiology and Biotechnology Research of Key Techniques to Improve Quality and Yield in Inositol Production Process Methods of Porous Biomedical Material Fabrication Effect of Camptothecin on the Embryonic Development and Angiogenesis of Zebrafish Embryos A Tunable pH-Responsive Nanomaterials for Cancer Delivery The Basically Study on Arenga Engleri Fiber Bioactive Component Extraction from Antrodia camphorata Fruiting Body on Artificial Agar Media Selective Breeding of Oxygen-Tolerant and Oxalate-Degrading Lactic Acid Bacteria by Protoplast Fusion A New Host-Guest Biomaterial Apply for DNA Sequence Electrochemical Detection Optimization of Determination Conditions for Protease in Landfill New Integration Technology on Preparation of Natural Seleniferous Rice Protein Peptide with Enzyme and Ultrasonic-Microwave Synergistic Technology Parameter Optimization of Biodegradable Polymer Materials Degradation Model Based on ACO Algorithm Expression and Purification of His-chIFN- and its Antiviral Activity Assay Application of Chelating Agents as Cooking Aids in Bamboo Pulping Anti-Fatigue Activity of Pecan Oil in Mice Salidroside Inhibits Endogenous Hydrogen Peroxide Induced Cytotoxicity of Endothelial Cells Improvement of Impaired Memory in Mice by Schisandrin Novel Microwave Carbonization System for Coconut Shells Protective Effect of Schisandrin on Hydrogen Peroxide-Induced Damage in PC12 Cells Effects of Radix Platycodonis Polysaccharide on Expressions of IFN- , IL-4 and IL-5 in the Bronchoalveolar Lavage Fluid and Nf- in the Lung Tissue of Asthmatic Rats Study on Purification of Tea Saponin by Foam Separation Method Solid-Liquid Extraction Kinetics of Flavonoids from Okra (Abelmoschus esculentus l. Moench) Pods with Applicability Analysis How to Represent Respiratory System take Pathology into Account Chapter 10: Biomaterials, Microbiology and Biotechnology Effects of Selenium Application in Soil on Formation of Iron Plaque outside Roots and Cadmium Uptake by Rice Plants A New Rice Husk-Plastic Composite Powder Preparation Process for Selective Laser Sintering Fabrication Effects of Zein on Film-Forming Ability and Properties of Wheat Gluten Films Water Prehydrolysis of Moso Bamboo Dissolving Pulp Extraction and Antioxidant Property In Vitro of Cordycepin in Artificially Cultivated Cordyceps Militaris Modified Octyl-2-Cyanoacrylate Tissue Adhesive for the Closure of Long Surgical Incisions Comparison of Porosity Improvement of Silk Fibroin Membrane Using Polyethylene Glycol and Glutaraldehyde for Increasing Oxygen Permeability The Characterization of a New Antibacterial Polyurethane Determination of Polyphenols in Lycopus lucidus Turcz by Capillary Electrophoresis with Electrochemical Detection Study on Capillary Electrophoresis-Amperometric Detection Profiles from Propolis and its Medicinal Preparations Isolation and Biological Activities of Citral from Sweet Orange Oil The Formation of Plasma Acid at Atmospheric Pressure and its Application in Hydrolysis of Microcrystalline Cellulose Dynamic Self-Assembly Process of a Designed Peptide The Microstructure and Swelling Properties of Laminated HAp/CS Hydrogels A Modified Hydrothermal Synthesis and Luminescence of Hydroxyapatite Doped with Ce3+ and Tb3+ Ions PEG-PLGA Nanoparticle Modified by Transferrin Loading Doxorubicin: In Vitro and In Vivo Studies for Glioma The Primary Investigation on Biological Effect of Mesoporous Bioactive Glass In Vivo Cu Ion Release and Cell Damage Effect of Cu-Containing IUDs with Different Surface Areas of Copper Viscosity of Gelatin Solution Containing Cationic Crosslinker Decomposition of Hydroxyapatite in Hydroxyapatite/Zirconia Composites for Dental Applications Study on Corrosion Property of Fluoride Treated Biodegradable AZ31 Magnesium Alloy Synthesis of Poly(ethylene glycol) Derivatives Research Progress of Molecular Imprinting Technology Chapter 11: Chemical Materials and Engineering Research and Evaluation of High Temperature Plugging Agent Carbonization Regime Process of Coal Tar Refined Soft Pitch TiO2 Nanotube Film as the Support of Platinum Electro-Catalyst with Enhanced Electrochemical Activity for Methanol Oxidation Effects of Carriers on Amination of Ethanol to Acetonitrile over Catalysts Loaded with Cu Numerical Simulation on the Preparation of Vinyl Acetate Catalyst in Fluidized Bed Synthesis, Structures and Properties of Two New Three-Dimensional Ce(III) Coordination Polymers with 2,2'-Bipyridine-4,4'-Dicarboxylic Acid Experimental Investigation on Coking Characteristics of China RP-3 Kerosene under High Temperature and Long-Duration Conditions Modelling of a Monolithic Solid Oxide Fuel Cell Analysis of Nitrogen Oxides Formation in CH4/Air Laminar Premixed Flame Adsorption Property of MgAl-NO3 Layered Double Hydroxides to Methyl Orange Study on a Novel Prerefining Catalyst for Hydrocracking Process The Research of Mineralizers of the Silicon-chrome-Green Pigment Synthesis, Characterization and Properties of Arylamine-Acetylene Bridged Tetrahedral Cobalt and Iron Carbonyl Clusters Study on the Control of Super-Fine Aluminum Hydroxide Particle Size from Sodium Aluminate Solutions Experiment Investigation on Spontaneous Combustion of Iron Sulfides' in Oil Tank Synthesis and Crystal Structure of a Novel 3D Sm(III) Coordination Polymer with Mixed Ligands Synthesis and Characterization of 4-Phenylethynylphthalic Anhydride High Active Cu/SiO2 Catalyst Prepared by Hydrolysis-Polymerization Method for 2-Butanol Dehydrogenation Dehydrogenation of Sec-Butanol to Methyl Ethyl Ketone over Cu-ZnO Catalysts Prepared by Different Methods: Coprecipitation and Physical Mixing Structural and Elastic Properties of Antimony Triiodide from First-Principles Calculations Preliminary Study on the New Dual-Bed Photocatalytic Hydrogen Production System Electrochemical Performances of Li4Ti5-xAlxO12 (x=0.03, 0.05, 0.10) as Anode Materials for Lithium Ion Battery Synthesis, Characterization, Optical and Electrochemical Properties of Multinuclear Cobaltadithiolene Complex Derivatives Influence of Carbonization Conditions on Mg Ion Concentration in Mg (HCO3)2 Solution Synthesis of Monolithic Macroporous Carbon Xerogels from Phenol, m-Cresol, Furfural and Phosphoric Acid by Sol-Gel Approach Preparation of Highly Dispersed Pt Supported on -Al2O3 with Strong Electrostatic Adsorption Preparation and Properties of Gadolinium Homoleptic Double-and Triple-Decker Complexes Containing Tetrabenzoporphyrin Ligand Liquid-Phase Oxidation of Toluene to Benzoic Acid over Manganese Oxide Catalyst Methanol Dehydrogenation to Formaldehyde over Zinc Oxide-Modified Sodium Carbonate Preparation of Alcohol-Soluble Polyvinyl Butyral Study on the Photocatalytic Properties with Different Ratio Films of ZnO:Fe2O3 Synthesis, Crystal Structure and Photoluminescent Properties of a New Uranium-Containing Silicotungstate Oxidation Kinetics of Magnesium Sulfite in Presence of Synthesized Solid Catalyst Density Functional Theory Study of Intermolecular Interaction between RDX and H2O Study on Gasoline Combustion Dust with ASE and HPLC Kinetics of Mesophase Sphere Formation of Toluene Soluble Fraction Determination of Inductive Ignition Period and Activation Energy of Food Dust Characterization of TiO2/ACF Preparation in Caprolactam Tetrabutyl Ammonium Bromide Ionic Liquid Chapter 12: Thin Films and Membranes The Magnetisc Study of the ZnO Thin Film with Defects Kinetic Monte Carlo Simulation of Surfactant-Mediated Thin Film Growth Influence of Ti Layer on the Structure and Properties of Al/Cu Thin Film Effect of H2 on Microstructures and Properties of AlN Films Deposited by Reactive Magnetron Sputtering Surface Modification of Parylene C Film and Application The Influences of Oxygen Content on Microstructures and Optical Properties of Al2O3 Films Deposited by Oxygen Ion Beam Assisted Pulse Reactive Magnetron Sputtering Preparation of SiO2/PMMA Organic-Inorganic Hybrid Membrane via Microemulsion Situ Polymerization Technology Structure and Photoelectric Properties of Dy Doped CdS Polycrystalline Thin Films Influence of Substrate Temperature on Properties of Transition Materials from Amorphous to Microcrystalline Silicon Prepared by VHF-PECVD Temperature-Graded Ferroelectric Thin Films under Two Boundary Conditions Preparation and Characterization of Electrospun PVDF/PMMA Composite Fibrous Membranes-Based Separator for Lithium-Ion Batteries The Preparation and Property Research on Laponite-Poly (L-Lactide) Composite Film Impacts of N2 Import into Reaction System on the Structures and Properties of the Graphite-Amorphous Carbon Films The Structure and Properties Research on Poly(Lactide-Co-Trimethylene Carbonate) Film Prepared by Blow Molding Preparation and Mechanical Properties Study of Blown Film from Star Copolymer of Poly(Epsilon-Caprolactone-co-L-Lactide) Preparation of Polypropylene and Polysulfone Composite Ultrafiltration Membrane though Physical Coating Method Morphology and Properties of a Series of PVDF Blend Membranes Study on Preparation of Nano-Sized Iron Oxide Thin Films and its Modification Study on the Key Technology of Membrane Roof Structure of Expo Axis in 2010 Shanghai World Expo Research on Electroless Plating of Poly (Ethylene Terephthalate) Films by a New Palladiumfree Activation Process Chapter 13: Surface Engineering/Coatings Physico-Mechanical Properties of the Cr-C and Mo-C Coatings Investigation of Surface Nanocrystallization by Pre-Forceing Rolling Technology The Microstructure Inhomogeneity of the Laser Surface Hardened Layers The Occurrence and Control of the Surface Defects of Color-Coated Sheets Study on Electrochemical Corrosion Behavior Comparison between DLC and TiN Coatings under Different Corrosive Environment Improved Wear and Corrosion Resistance of Ni-P Electroless Deposited Coating with RE Added A Novel Method for the Measurement of Slight Wear Applications of Spraying Technology in the Converter Hood Effect of Rare Earth Cerium on the Synthesis and Wear-Resistance of Electroless Ni-P-PTFE Coatings The Preparation and Microstructure of DLC Films Deposited through Plasma Electrodeposition in Water/Ethanol Solution Microstructure and Erosion Resistance of Hot-Dip-Aluminized 3Cr13 Steel Effect of Molybdate Bath Service Life on Corrosion Resistance of Conversion Coating Deposited on Hot Dip Galvanized Steel Corrosion Protection of Molybdenum-Phosphorus Compounds Based Coating Formed on Hot Dip Galvanized Steel in a Cl- Ione Environment Fabrication of Magnetic Cenosphere Deposited with Fe3O4 Nanoparticles by Hydrothermal Method Hyper-Dispersant Modifier Prepared and Applied in Polyethylene Composites Dynamic Simulation of Heating Situation of Spraying Powder Effect of Ni on the Properties of a Laser Surface-Clad Fe-Based Alloy Effect of Calendering Conditions on the Properties of Paper Coating Nano-Nickel Film on Cenospheres by Magnetic Sputtering Method Effects of Vanadium on Microstructure and Properties of a Fe-Cr-W-Mo-V Overlaying Alloy The Effect of Different CeO2 Addition on Performance of Ni-WC Composite Coating by Vacuum Fusion Sintering Preparation and Characterization of UV-Curable Talc/Acrylate Composite Coatings with Enhanced Flame-Retardancy Electroless Nickel Plating on ME20M Magnesium Alloys with an Environmentally-Friendly Pretreatment Effect of Stabilizers on Electromagnetic Property of Electroless Ni Coating on Aluminum Powder Effect of Temperature Induced by Laser Irradiation Processing on Fatigue Damage Repairing for Copper Thin Film A Newly Developed Self-Bonded SiC Refractory Study of Metal Friction Materials Using Hot Press Computational Simulation and Prototype Testing of Nanocoating on Products in Aerospace Industry Microstructure and Oxidation Resistance of TiN Coatings Electrochemical Impedance Spectroscopy Study of Nano-Materials Modified Fluorocarbon Coating of Metal Surface Synthesis of Carbon Nanocoatings on YG8 Hardmetal Substrates in Oxygen-Acetylene Flame Investigating the Application of Nanoscale Bilayers Assembly on Stainless Steel Plate to Evaporation Behavior Mechanism and Experimental Research on Improvement in Conductive Performances of ZnO Coated Tourmaline Powder Microstructure and Wear Resistance of ZrC Reinforced Metal Matrix Composite Coating by Gas Tungsten Arc Cladding Effect of N2 Flow on Microstructure, Mechanical Properties and Oxidation Resistance of CrNx Coatings Preparation of Ceramic Surface Hydrophobic Coating by Sol-Gel Method Effect of MgO Coating on Whisker Preform Strength of Aluminum Matrix Composite Fabricated by Squeeze Casting Study on Technology of Multi-Trace Overlapping and Rapid Prototype by Broad-Beam Laser Cladding Chapter 14: Other Areas of Materials Science Correlative Study of the Fabric Properties and the Shrinkage of Gather The Application of New High-Strength Polyester Fiber Flexible Net for the End Coal Mining Through Analysis on Development Status and Trend of Vehicle Materials Your The Research on the Friction and Wear Behavior of FKM/NBR Blends under Water Lubrication Pressure Measurements of Aluminized Explosives Detonation Front with Different Aluminum Particle Size Failure Analysis on Boiler Industrial Extraction Steam Pipe Constitutive Equation of 5Cr21Mn9Ni4N Valve Steel during Hot Compression Corrosion Failure Analysis of a Colored Steel Plate Used as the Workshop Roof Study and Evaluation on Dispersion of Molybdenum Disulfide in Aqueous Solution Influence of the Cathodic Charging Current on Electrochemical Behaviors of X80 Steel in an Simulated Acidic Soil Solution Theoretical Model Research of Metal Rubber Material Research on Performance of the Cu-Based Friction Materials Repaired by Spark Plasma Sintering A Preliminary Study on Preparation of MgAlON Refractory A Nonlinear Viscoelastic and Micromechanical Damage Constitutive Model for Solid Propellant Analysis of Fracture Behavior of Metal/Ceramic Functionally Graded Materials under Thermal Stress Effect of Helium on Stabilizing Vacancy Configuration in Delta-Plutonium Finite Element Analysis of Thermal Stress for Femoral Prosthesis The Feasibility Study on Stability of the Propellant GLQ by Testing the Content of the Centralite in with Gas Chromatography Test The Pore Structure Multifractal Research of Low Silicon Sinter Phase Difference Technique for Material Classification by Using Tuning Fork with Piezoelectric Resonator Cyclic Voltammetric Studies of the Behavior of Pb-0.3%Ag-0.06%Ca Rolled Alloy Anode during and after Zinc Electrowinning Phase Composition Analysis of Recycled MgO-C Ladle Lining Materials A Study on Suizhong 36-1 Oil Field Acid Sludge Formation Influence Factors Jet Blast Resistance Experiment of Engineered Material Arresting System QSPR Study on Gross Heat of Combustion of Nitro Aromatic Compounds Based on Genetic Algorithm The Corrosion Failure Analysis of Plate Pipe for Plate Heat Exchanger The Effect of Corrosion Inhibitor in Hydrofluoric Acid Medium The Study on the Dynamic Response Performance of PEMFC Stack with Electrodeposited Pt/C-RuO2*xH2O Electrode Calculation and Analysis of Multifractal Spectrum of Sinter Surface Two Temperature Model Numerical Simulation and Analysis of Thermal Transport Process in Copper Film Study on the Properties of the SPPs Self-Interference Variation of Surface Tension of Water in High Magnetic Field Research on the Relationship between Changes of Active Groups and Gaseous Products in Different Temperatures Optimization of Shot-Peening Conditions and Wave Profiles to Improve Durability of Wave Cushion Spring The Statement of Material Mix-Match in Jewelry Design Development of the Woolen 48Nm Cashmere Yarn The Effect of Steam Explosion Treatment on the Separation of Lotus Fiber Research on Structure and Properties of Camel Wool Antimicrobial Treatment of Bamboo Blending with Cotton Carpets Using Modified Chitosan Development of Bamboo Charcoal Fiber Blended Anti-Ultraviolet Fabric Study on Coiled Fiber Height Distribution of Variable Cashmere Surface Production of Sugar Beet and Maize as Energy Crops in Saline Alkali Soil Effects of 1-MCP and Controllable-Release SO2 Packaging on Cold Preservation of Grapes (C.V. Muscat Hamburg) Adhesion Properties of Pigment Dyes Using Ultrasonic Energy Influence of Fabric Textures on Pilling Performance of Wool Sweaters Effect of Subsoiling Cultivation on Corn in Semi-Arid Region of Western Liaoning Province Effect of Technology Factors on the Resin Impregnation Results of Poplar

「Nielsen BookData」 より

関連文献: 1件中  1-1を表示

詳細情報

  • NII書誌ID(NCID)
    BB1496075X
  • ISBN
    • 9783037857632
  • 出版国コード
    sz
  • タイトル言語コード
    eng
  • 本文言語コード
    eng
  • 出版地
    Durnten-Zurich
  • ページ数/冊数
    3 v. (2385 p.)
  • 大きさ
    24 cm
  • 親書誌ID
ページトップへ