Chemical, material and metallurgical engineering III : selected, peer reviewed papers from the 2013 3rd International Conference on Chemical, Metallurgical Engineering (ICCMME 2013), December 10-11, 2013, Zhuhai, China

著者

• International Conference on Chemical, Metallurgical Engineering
• Zeng, Jianmin
• Li, Jiahao
• Zhu, Hongxi

書誌事項

Chemical, material and metallurgical engineering III : selected, peer reviewed papers from the 2013 3rd International Conference on Chemical, Metallurgical Engineering (ICCMME 2013), December 10-11, 2013, Zhuhai, China

edited by Jianmin Zeng, Jiahao Li and Hongxi Zhu

（Advanced materials research, v. 881-883）

Trans Tech Publications, c2014

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the 2013 3rd International Conference on Chemical, Metallurgical Engineering (ICCMME 2013), December 10-11, 2013, Zhuhai, China. The 375 papers are grouped as follows: Chapter 1: Chemical Materials and Technologies; Chapter 2: Catalyst and Catalytic Reaction; Chapter 3: Pharmaceutical Engineering, Biological Chemical and Biomedical; Chapter 4: Waste Disposal and Environmental Chemicals; Chapter 5: Chemical Thermodynamics and Kinetics; Chapter 6: Food Science and Food Chemistry; Chapter 7: Composites and Polymers; Chapter 8: Micro / Nano Materials; Chapter 9: Ceramic; Chapter 10: Functional Materials; Chapter 11: Environmental Friendly Materials; Chapter 12: Building Materials; Chapter 13: Iron, Steel and Alloys; Chapter 14: Materials Processing Technology; Chapter 15: Metallurgical Science and Technology; Chapter 16: Exploration and Extraction of Mineral Resources, Mining Engineering; Chapter 17: Measurements and Modeling in Material Science

目次

Preface and Conference Organization Chapter 1: Chemical Materials and Technologies Strategy in Optimization of Silicone Oil Emulsion by D-Optimal Mixture Design Wood Smoke Impact on Particulate Matter (PM) Quantitative Analysis of Sn-2 Palmitic Acid Content in the Triacylglycerols from Algae Oil Using Enzymatic Hydrolysis Rapid Analysis of the Bisphenol a in Slips of Store Receipts and ATM Machine with Head-Space Liquid-Phase Micro-Extraction Coupled to Gas Chromatography and Mass Spectrometry Chemical Constituents and Antibacterial Activity of Euphorbia altotibetica Screening of Formulation for 5% Hexaflumuron Suspension Concentrates Optimization of Furfural Production from Xylose by RSM Using Chromium Sulfate as Catalyst Lipase-Catalyzed Synthesis of Sucrose Fatty Acid Ester and the Mechanism of Ultrasonic Promoting Esterification Reaction in Non-Aqueous Media Analysis on the Main Problems of Industrial Application of the Regenerated Amine Desulphurization Technology Effects of Strong-Acid on Performances of Copper Solvent Extraction Visual Study on the Effect of Osmotic Pressure on the Morphology of Emulsion Liquid Membrane Stereo-Controlled Total Synthesis of Ieodomycins A and B Optimization of HS-SPME for GC-MS Analysis of Volatiles Compounds in Roasted Sesame Oil The Resonance Rayleigh Scattering Spectrum Characteristic of Tb3+-GMFX-AR and the Determination of Gemifloxacin Preparation and Research Advance of Electronic Grade Phosphoric Acid Study on Synthesis of Complexes of Maleamic Acid and Lanthanum Ion Study on Liquor Wastewater Treated Process by Domesticated Activated Sludge to Produce Polyhydroxyalkonoates Formation the Polypyrrole / Chitosan / Polylactic Acid Microencapsules Growth Characteristics of Hydride for Aging Treated U-5.5wt.%Nb Alloy Determination of 17 -Estradiol Based on Electropolymerized-Molecularly Imprinted Polymer on Gold Nanoparticles-Graphene Modified Electrode Preparation of Iron Carbide from High Phosphorus Oolitic Hematite The Study of Composite Substituting Mercury Corrosion Inhibitors for Zinc in Zinc-Manganese Battery Thermodynamic and Experimental Studies of Chlorination Reaction of FeO-Cu2O System Enhancement of Carbon Dioxide Mass Transfer Rate by (Ionic Liquid)-in-Water Emulsion Effect of Hydrogen Bonds to Form Complexes for N Active Structures which Contained in Coal and the Ca-Based Inhibitor Dyeing Technology of Real Silk with the Natural Curcumine Preparation and Property of a Bio-Char from De-Watered Sludge and Beer Lees A New Type of Fluid Loss Additive P1301 for Oil Field Cementing Epoxidation of Soybean Oil under Acid-Free Condition Preparation of Manganese Dioxide Loaded Active Carbon and its Adsorption Dynamic Progress on Synthesis and Application of Betaine Surfactants Enantioselective Reformatsky Reaction between Cinnamaldehyde and Diflurinated Organozinc Reagent: Synthesis of Chiral , -difluoro- -hydroxy Esters as Precursors of Statin Analogues Electrocatalytic Sensing of Nitrate at Cu Nanosheets Electrodeposited on WO3/Polyaniline Modified Electrode Synthesis and Properties of Poly (N-arylenebenzimidazole ketone)s Electrochemiluminescence Detection of Diphenhydramine Based on Tris(2,2-bipyridyl) Ruthenium(II) Immobilized on PEDOT-PSS Modified Electrode by Electrostatic Attraction Strategy The Quantum Research on the Nucleophilic Reaction Activity of Polycyclic Aromatic Hydrocarbons Hydrothermal Synthesis and Photocatalytic Activities of La-Doped BiVO4 Microcakes Synthesis, Crystal Structure and Fluorescence Study of 8-Dimethylaminomethyl-7-hydroxy-chromen-2-one1 Density Functional (B3LYP)and the Second-Order Moller-Plesset (MP2) Theoretical Method Investigate the Geometric Configurations of the D...CO (D=He, Ne, Ar, Kr and Xe) Complexes X*F (X=C, N, O and S) Noncovalent Weak Intermolecular Interactions The Research for Introducing Gem-Difluoromethylene Group into the Organic Molecules Synthesis, Characterization and Photophysical Properties of CuI Complexe with 7,10-Dimethyl Pyrazino [2,3-f][1,10]phenanthroline Synthesis and Crystal Structure of Tridodecylammonium 3,5-Dinitro-1, 2, 4-1H-triazolate (TDADNT) Hydrothermal Time Effecting on the Morphology of Hydroxyapatite Templated by L-DOPA The Stability of Potassium Ferrate in Water Determination of Phoxim in Water Sample by Hollow Fiber Supported Ionic Liquid Coupled with High Performance Liquid Chromatography Overloading Behavior of Anthracyclines on Silica Column with Aqueous-Organic Mobile Phases: Effect of Organic Modifier Investigation of Sulfur Transformation during Coking Process Research on Production and Pyrophorisity of Iron Sulfur Compounds in Liquid Phase Chapter 2: Catalyst and Catalytic Reaction The Catalyzed Synthesis of Prenyl Alcohol in Anhydrous System Preparation of TiO2-Al2O3 Support and Hydrodenitrogenation over Ni2P/TiO2-Al2O3 Catalyst Study of the Performance of the Cobalt Based Catalyst on Different Supports for Fischer-Tropsch Synthesis Photocatalytic Performance of ZnO Prepared by Sol-Gel Method with the Assistance of CTAB Design and Synthesis a Novel Supported Pd-Pt Mesoporous Composite as Catalysts for the Polyaromatic Hydrogenation Effective Hydrogenation of p-Chloronitrobenzene over Iridium Nanoparticles Entrapped in Aluminum Oxy-Hydroxide under Mild Conditions Reactivity of Olefins and Thiophenes in Hydrodesulfurization of FCC Gasoline The Bimetallic Synergistic Effect in Heterogeneous UV/Fenton System for the Treatment of Refractory 6-Nitryl Wastewater The Influence of Preparation Procedures on Hydrogenation CO2 to Formic Acid over Supported Ru Catalysts Ammoximation of Cyclohexanone over Shaped TS-1 Zeolite Catalysts Synthesis and Characterization of Metal Salen Complexes Immobilized MCM-41 and their Catalytic Activity for Benzyl Alcohol Oxidation The Preparation and Characterization of the Solid Acid Catalyst for the Esterification of the Gutter Oil Efficient Catalytic Hydrodechlorination of 4-chlorophenol in Water over Rh/AlO(OH) Catalyst The Recovery of Sulfur Resource during Regeneration Process for the Hot Gas Desulfurization Sorbent Research on the Phenol Degradation in Microbial Fuel Cells with Fe3O4-Reduced Graphene Oxide Cathodic Catalyst Efficient Hydrogen Production by Catalytic Dehydrogenation of Methylcyclohexane over Ni-Pt/ Nano-Film Alumina Catalyst Simulation of Sulfolane Extraction Distillation Process Chapter 3: Pharmaceutical Engineering, Biological Chemical and Biomedical Recombinant Expression of Bioactive Peptides: A Review Application of a Bioinformatics Method on Detecting of Acinetobacter baumannii Carrying Metallo- -Lactamases Isolated from Inpatients Saponins from Panax japonicas Reduces Myocardial Infarction Induced Reactive Oxygen Species Production and Cardiomyocyte Apoptosis via Activation of the Nrf-2 Pathway Extraction Process Optimization of Endo-Polysaccharides from Phellinus igniarius Synthesis of Esomeprazole through Asymmetric Oxidation Dihydro Flavonols Maybe an Effective and Specific Novel Treatment for Alcoholism by Affecting the Express of Aminobutyric Acid Radiation Threshold Damageability of Cells Depending on the Availability of the Cell Nucleus Development of Dencichine Plus Yunnan Baiyao Band-Aid Desirability Approach for the Optimization of Black Pepper Extract and Chitosan Fresh-Keeping Solution Proportion Coating on Tilapia Research on Preparation Process of 5% Hexaflumuron Suspension Concentrates Study on Antioxidant Activity of Pigment in Black Soybean Peel Synthesis and Characterization of S-Tenatoprazole Three-Dimensional Protein Structure Prediction for CD36 The Use of PEI in the Targeted Gene Delivery of VEGF165 and Ang-1 Synthesis Podophyllotoxin Derivatives via "Click Chemistry" Synthesis of Bicyclic Furo[2,3-d]pyrimidine Deoxynucleosides Conjugated with N-Diisopropylphosphoryl Amino Acids A Trial on the Overexpression of Epidermal Growth Factor Receptor and Proliferating Cell Nuclear Antigen in NSCLC of Similar Differentiation Glycoconjugation of 4-Methylumbelliferone via "Click Chemistry" Chemical Constituents from Gentiana algida Pall Synthetic Study towards (+/-)Ieodomycin A Anti-Fatigue Effects of Polysaccharides from Gynostemma pentaphyllum Makino by Forced Swimming Test The Synthesis of (1-oxaspiro[2.5]octan-2-ylmethoxy)(tert-Butyl) Dimethylsilane Synthesis of (R)-3-((4-methoxybenzyl)oxy)butanal Study on Synthesis of (R)-tert-butyl (1-hydroxybut-3-yn-2-yl)carbamate Alkaloids from Penicillium oxalicum, a Fungus Residing in Acrida cinerea Facile Synthesis, Characterization and Anti-Inflammatory Effect of 3-Aminoindolizine Derivatives Study on the Making of Amphiphilic Triblock Copolymer as Blood Substitutes Comparative Analysis of Compositions between Calcium Phosphate Calculi and Urinary Crystallites in the Stone-Formers A Prophase Study on the Concise Synthesis of Aculeatin A Synthesis of (R)-2-(1-hydroxycyclohexyl)-2-(4-methoxyphenyl)ethyl 4-Methylbenzenesulfonate Clinicopathological Significance of HO-1 and HO-2 Expression in Medulloblastoma Production of Personalized Thyroid Cartilage Scaffold and Histological Analysis Spectrophotometric Determination of 6-Mercaptopurine in Pharmaceutical Sample Using Fe(III)-Potassium Ferricyanide System Evaluation of In Vitro Antibacterial Activity of Endophytic Fungus from Anemone tomentosa Isolation of Endophytic Fungi from Ephedra intermedia and Research Antibacterial Activity of Secondary Metabolite Produced by the Fungi Determination of Vitamin and Aminophylline by a Method of PLS Well-Established Biodegradation Tests Used Biogenously Evolved Carbon Dioxide as an Analytical Parameter to Determine the Ultimate Biodegradability of Metalworking Fluids Measured by the Change of Absorption Solution Conductivity Fabrication of Paper-Based Microfluidics by Single-Step Wax Printing for Portable Multianalyte Bioassays Research on Simulation of Complex Distillation System for Biomass Fuel Ethanol Based on Virtual Assembly Chapter 4: Waste Disposal and Environmental Chemicals The Removal of Strontium(II) and Neodymium(III) from their Aqueous Solutions on Chrysotile Nanotubes Study on Reactive Dye Wastewater Treatment with Quaternary Chitosan Using Lix984 to Recover Cu2+ from Plating Wastewater Containing Chloride Study on Photocatalytic Properties of Graphene/TiO2 Composite Prepared by Impregnation Method Effect and Circulating of IC Reactor Treating Straw-Washing Wastewater Source of SO2 in Exhaust Gas from Carbon Production and Baking Process Study on the Recovery of Waste Wool by Combining Reduction and Metallic Salt Methods Investigation on the Purification Efficiency of Rainwater by Green Land Research on MSW (Municipal Solid Waste) Gasification by CFB (Circulating Flue Bed) Study on Treatment of Smelting Contaminated Acid by Evaporation Condensing Process Adsorption of Heavy Metal Ions from Aqueous Solution by Chitosan Thermodynamics of the Vitrified Bottom Ash Slag from Municipal Solid Waste Incinerators-Phase Relations of CaO-SiO2-Na2O Oxide System Preparation and Characterization of Activated Carbon from Reedy Grass Leaves by Chemical Activation with KOH The Effects of Different Adsorbents from Orange Peel on the Pesticide Furadan Thermal Debromination of Waste Printed Circuit Boards by Iron-Based Catalyst Determination of Parathion in Water Sample Using Ionic Liquid Head Space Microextraction Followed by HPLC Study on Advanced Pretreatment of Seawater by Electrolysis Preparation and Performance Research of the Environment-Friendly Corrosion and Scale Inhibitor Carbon Balance in Nanjing's Ecological Economic System A Water-Soluble Iron Porphyrin as a Highly Efficient and Recyclable Catalyst for Peroxynitrite Decomposition Chapter 4: Waste Disposal and Environmental Chemicals Determination of Acrylates in Wastewater by Dispersive Liquid-Liquid Microextraction Coupled to Capillary Gas Chromatography Determination of Aromatic Amines in Wastewater by Dispersive Liquid-Liquid Microextraction Coupled to Capillary Gas Chromatography Study on Cold Flow Properties of Waste Cooking Methyl Ester Simultaneous Desulfurization and Denitrification from Flue Gas Using Urea/Piperazine Solution CO2 Capturing by MDEA-PZ-TETA in a Rotating Packed Bed The Calculation Methods of the Heat Balance for Recovering the Vaporous Water from Exhaust Gas in Ammonium Phosphate Production Simulation and Analysis of Cryogenic Air Separation Process with LNG Cold Energy Utilization Review of Treatment Methods for Fracturing Flowback Fluid Comprehensive Utilization of Red Mud Remaining in Alumina Production Extraction of Valuable Metals from Red Mud Study on Extraction of Mg from Boron Mud Chapter 5: Chemical Thermodynamics and Kinetics Extraction Kinetics and Mechanism of La(III) by P204-Kerosine from Phosphoric Acid Study on the Salt Precipitation Law of La Guocuo Salt Lake Brine with Pretreatment at 5 DegreesC Experiment and Numerical Simulation on Slugging Fluidization of Large Particles in Gas-Solid Fluidized Bed A New Modeling Approach to Estimate the Concentration of Tibolone in Acetone Solvent through Raman Spectra Feasibility Analysis of Electrodeposited Cu-W-Co Alloys Crystallization Kinetics of CaOx in Artificial Urine and in Saline System Solid-Liquid Equilibria for Binary Mixture of Dichlorophenols Nonlinear Analysis of Bubble Formation Dynamics in Shear-Thinning Fluids Transition of Bubbly to Slug Flow in a Short Vertical Channel of Gas-Liquid Two-Phase Flow Decomposition Kinetics of Switchgrass: Estimating Activation Energy Spontaneous Formation of DTAB/SLS Vesicles Chapter 6: Food Science and Food Chemistry Ethanol Extract of Julu Honeysuckle May be a Potentially Promising Preservative Material Isolation and Screening of Salt-Tolerance Lactic Acid Bacteria Strain and Study on its Characteristic Producing Lactic Acid Effect of Poly- -Lysine on Vacuum Packed Tilapia Stored at 4 DegreesC Effect of Catfish Bone Paste on the Properties of Steamed Bread The Change Rules of Physiochemical Indexes of Luzhou-Flavor Daqu Based on Continuous Flow Chemical Analyzer Functional Properties of the Protein Isolate and Major Fractions of Pine Nut Proteins Prepared from the Changbai Mountain in China Extraction, Purification and Partial Characterizations of Polysaccharides from Gracilaria lemaneiformis Study on Extraction and Detection of -Androstenol in Truffle Effect of Packaging Films on Quality of Fresh-Cut Broccoli Optimization of Fermentation Conditions of Mead by Response Surface Methodology Optimization for Acid Hydrolysis Conditions of the Simulated Last Monosodium Glutamate Mother Liquor by Response Surface Methodology Effects of Soybean Pectin Gel on Flavor Compounds Variation of Cheddar Cheeses during Ripening Optimization of Culture Conditions ,Separation and Purification of a Lipopeptide Biosurfactant from Pseudomonas palleronii S6X Study on Separation of 11S and 7S Fractions from Soy Protein by Different Techniques Isolation and Purification of Soybean Antioxidant Peptides Effects of Pine Nut (Pinus koraiensis) Meal Protein Peptides on Memory Function of Mice Effects of Pine Nut (Pinus koraiensis) Meal Protein Peptides on Thymus Coefficient and Transformation of the Splenic Lymphocyte of Mice Study on Method of Extraction and Determination of Cucurbitin ICP-AES Determination of Mineral Elements in Five Edible Seeds after Microwave Assisted Digestion Study on Pit Mud Lixivium from Different Years Pits by Gas Chromatography Mass Spectrometry Chapter 7: Composites and Polymers The Application of a New Composite Elastomer Material in Rubber Tracks Polyurethane Foaming Process Modelling by Finite Point Method Preparation of an Amphiphilic Magnetic Copolymer Microspheres Study on Thermal and Mechanical Properties of Polyurethane Systems for In-Mould Decoration Ink Progress in the Synthesis of Ternary Carbide by Carbothermal Reduction from Natural Raw Material Preparation of Waterbased Phenol-Formaldehyde Resin and its Application on Para-Aramid Paper Synergistic Effects of Nanoporous Nickel Phosphates VSB-1 on Intumescent Flame Retardant Polypropylene Composites Microstructure Characteristics and Mechanical Properties of In Situ TiB/Ti Composites Prepared by Arc-Melting Technique Alignment and Surface Modification of Multiwall Carbon Nanotubes Polymeric Composites Study on Interfacial Bonding Strength of SiO2/PET Composite Packaging Film Effect of Thermal Finishing on the Mechanical Properties of Hollow Polyester Fiber Facile Fabrication and Enhanced Photoluminescence Property of Zn(II) Coordination Polymers with 2,2'-biquinoline-4,4'-dicarboxylic Acid Effects of MPBM on Crosslinking Density and Mechanical Properties of Tetrafluoroethylene-Propylene Copolymer Study on Photocatalytic Degradation Performance of Nano Carbon Load WO3 Doping TiO2 Composites Cure Monitoring of Epoxy Resin by Simultaneous DSC/FTIR Fabrication of the ZnS-ZnO Composite Film by Sulfurizing the as-Electrodeposited ZnO Film Investigate of Phase Compositions and Microstructure of MgO-C through In Situ Nitride Determination of Free Polyethylene Glycol in Cross-Linked Sodium Hyaluronate Gel Efffect of Spark Plasma Sintering Temperature on Mechanical Properties of In Situ TiB/Ti Composites The Research of Nafion/PTFE/Inorganic Composite Membrane Used in Direct Methanol Fuel Cell Chapter 8: Micro / Nano Materials Preparation of Nano t-ZrO2 Particle by the Integrated Process of High-Gravity Field and Hydrothermal Crystallization Effect of Polyvinylpyrrolidone on the Preparation of Silver Nanowires Fabrication of Gold Nanoflowers and the Surface Enhanced Raman Scattering Performance Research Progress of Nanometer Titanium Dioxide Application Fabrication of Raspberry-Like Gold Nanoparticles and their Applications in Surface-Enhanced Raman Spectroscopy and Catalysis Comparative Study about Cytotoxicity with CuO Engineered Nanoparticles, TiO2 Engineered Nanoparticles, CeO2 Engineered Nanoparticles, Single-Walled Carbon Nanotubes Preparation of Tungsten-Doped VO2 (M) Nanoparticles through Sol-Gel Method and Hydrothermal Synthesis Characterization and Synthesis of Additive Coated BaTiO3 Nano-Powder Facile Preparation of Cu(OH)2@TiO2 Nanowire Arrays for Photoelectrochemical Water Splitting Toxicity of Copper Oxide Engineered Nanoparticles to Maize (Zea mays L.) at Different Aging Times Toxicity of CuO Engineered Nanoparticles to Eichhornia crassipes Microstructure and Properties of Fe-6.5wt%Si Alloys Cores with Core-Shell Structures Prepared by Mechanical Alloying and Spark Plasma Sintering Methods The Study of nano-SiO2/Polyacrylate Core-Shell Hybrid Emulsions Facile Preparation and Photocatalytic Activity of TiO2 Microspheres with a Diameter of 1-8 m Preparation of HgS Nanoparticles with Adjustable Dispersibility at Water/n-butyl Alcohol Interface Research Progress on Preparation Technology of Calcium Sulfate Spherical Nanometer Strontium Carbonate by Ultrasonic Method in the Water Phase Synthesis and Photocathodic Protection Properties of MO/SnO2 Core-Hell Nanocomposites Adsorption of Cd(II) from Aqueous Solution by Magnetic Graphene Chapter 9: Ceramic Synthesis of Al2OC Ceramic Powder by a Carbothermal Reduction Process Study on the Oxidation Kinetics of In Situ -Sialon Bonded Al2O3-C Refractories The Preparation of Porous Andalusite Refractory by Foaming Method The Influence of Donor-Doped Concentration on the PTCR Characteristics of the Ban-xSmxTiO3 Based Ceramics Sintered in Reducing Atmosphere Fabrication of SiO2 Porous Ceramics from Rice Husk Ash Influence of nanoAl2O3 Powder on the Properties of Microporous Corundum Aggregates Reaction and Sintering Mechanism of Forsterite Lightweight Material in Sodium Carbonate Molten Salt Effect of Briquetting Pressure on the Performance of In Situ Formed Sialon in Al2O3-C Refractory Bricks Electroless Plating Copper on SiC Particles Chapter 10: Functional Materials Research on Electromagnetic Shielding Efficiency of Metal Rubber Material The Design and Preparation of X Band Absorbing Insulation Coatings Modeling and Simulation of Underwater Acoustic Absorption Properties of Novel Macroporous Resins - Elastomer Thin Coatings Effects of Bias on Optical and Chemical Bonding Properties of Germanium Carbon Films 1,8-Naphthyridine Modified Rhodamine B Derivatives: Turn-On Colorimetric Sensor for Cu2+ Preparation of Graphene Oxide Based on Expanded Graphite Research on the Properties and Making Methold of Multi Alcohol Modification Particles ER Fluid Experimental Investigation on Radiation Characteristic of Nanofluids for Direct Absorption Solar Collectors Synthesis and Photocatalytic Properties of Flower-Like ZnIn2S4 Microspheres by a Solvothermal Method Study on the Spectral Distribution Property of PDLC Films Color Display Microwave Permeability of FeCo-Based Magnetic Thin Films Changes of Band Gap Structure of 1-D Quasi-Periodic Photonic Crystal at Angular Incidence Effects of the Sputtering Time of AlN Buffer Layer on the Quality of ZnO Thin Films PPy/Cotton Fabric Composite Electrode for Electrocardiogram Monitoring Finite Element Analysis of Piezoelectric Pile Dynamic Characteristics Improving the Performance of Organic Light Emitting Diodes by Doping PEDOT:PSS Chapter 11: Environmental Friendly Materials Synthesis of Calcium Peroxide Microparticles and its Application in Glyphosate Wastewater Pretreatment Synthesis of Loaded Silver 4A Zeolite Molecular Sieve with Magnetic Cores of SiO2/( -Fe2O3- SiO2) for Demercuration Effect of Alkali Leaching on Properties of Chitosan Film Physical and Mechanical Properties of Chitosan Films Incorporated with Florida Mandarin Oil Cation and Anion Exchange Membranes Prepared by Radiation-Induced Graft Polymerization for Application in Electrodialysis The Research on the Physical and Chemical Properties of Eggplant Stalk Fiber for the Complex Utilization of Stalk Corrosion Behavior of Rare Earth Cerium Based Trivalent Chromium Conversion Coating on Zinc Study on Season Factor in the Preparation of PVA/RS Composite Study on Adsorption of Methylene Blue by Sarch-g-Polyacrylamide Composite of Shortcut Grass and Poly(vinyl alcohol): Preparation and Performance Chapter 12: Building Materials Analysis on Unfrozen Water Content of Mohe Permafrost Based on NMR Method About Research of Ramic Concrete Strength and Thermal Performance The Research on Producing Recycling Cement Using Waste Concrete The Magnetic Performance of the Particles of Steel Slag Powder Study on Chloride Ion Penetrability of Recycled Aggregate Concrete The Thinning Study of /4 Type Absorber Made of Carbon Fiber Membrane and Gypsum Board Effect of Water-Binder Ratio and Mineral Admixture on Frost Scaling Resistance of Concrete The Design and Preparation of Composite Gypsum Boards Absorber Based on Phase Modulation Membrane Research on Compressive Properties of Sea Sand Concrete Well Pattern Optimization Design for CBM Development Chapter 12: Building Materials Heat Transfer Analysis and Energy-Saving Methods of the Exterior Windows in the Northern Area The Influence of Pretreatment and Usage on the Humidity Control Property of a Novel Paperboard Quantitative Phase Analyses of a Slag Using X-Ray Powder Diffraction The Impact of /4 Type Absorber Protective Layer 's Thickness on Absorbing Properties Experiment on Decarburization of High Carbon Fly Ash and Preparation of Concrete Chapter 13: Iron, Steel and Alloys The Research of Hardox400 HSLA Steels Weldability Surface Modification of SS2205 Duplex Stainless Steel by Plasma Nitriding at Anodic Potential On Wear Resistance of Laser-Treated Striated Non-Smooth Surface of Nodular Cast Iron Research on Impact Property of 40Cr Steel under Different Tempering Conditions Corrosion Behavior of ZnAlMg Coating of Dual Phase Steel Sheet The Electrochemistry Behaviour of Carbon Steel in 55% LiBr Solution with A-Mo Inhibitor Study of Heat Treatment Technology on Medium-Carbon-Low-Alloy-Steel Large Hammer Formation of Gradient Performance Properties of P91 Steel Steam Conduit Pipe with Low Hardness in a 600 MW Power Plant The Production and Utilization of Two Smelting Processes for V-Ti Magnetite Investigation on Mechanical Properties and Microstructure of SSM 356-T6 Aluminium Alloy by Diffusion Bonding Experimental Study on Corrosion Prevention of a Multilayer Coating System Cellular Automata Simulation of Grain Growth in Magnesium Alloy Heat Affected Zone of Laser Melt Injection Effect of Heat Treatment Hardness of Al-Cu-Mg-Li-Zr, Al-Mg-Si and and Al-Mg-Zn Alloys-Experimental Correlation Using Factorial DOE and ANOVA Methods Influence of Microstructure and Stress Ratio on Fatigue Crack Propagation in TiAl Alloy Calculations for Diffusion Probability and Diffusivity of Interstitial Atom in one Lattice for -TiAl Alloy Effects of Sm and Nd on Microstructure and Properties of AZ81 Magnesium Alloy Effect of Adding Y2O3 on Synthesis of Al4SiC4 Powders The Effects of Solid-Solution on Properties and Microstructure of 6063 Aluminum Alloy The Effect of Cr Addition on the Microstructure of TiNi: First-Principles Calculations A Study on Thermal Fatigue Behavior of Al-Si-Mg Casting Alloys The Purification of ZL114A Alloy by Means of Bubble Floatation Study of Damage Limit for Aluminum Alloy Plates with Surface Cracks under Cross-Thickness Bending Creep Properties of Mg-12Gd-3Y-1Sm-0.5Zr Alloy Effect of Pre-Treatment on the Precipitation Hardening of a Novel Al-Mg-Si Alloy Effect of Ultrasonic/Electromagnetic Energy-Field on Structure Andproperties of Cast-Rolled 3003 Aluminum Alloy Strips Study on Preparation and the Characteristics of Environment-Friendly Ce-Ti-Mn Conversion Coating on Aluminum Alloy 6061 Effect of AlF3 Addition on Electric Conductivity of NiFe2O4-Based Cermet Inert Anode Microstructure and Mechanical Properties of Magnesium Alloy AZ61with 1%Sn Addition Microstructure and Mechanical Properties of Cobalt Alloy Coating Deposited by Electro-Spark Chapter 14: Materials Processing Technology Characterization of Ni-Based Alloy Submicron WS2/CaF2 Composite Coatings Deposited by High Velocity Oxy-Fuel (HVOF) Spray Process J-Integral and Plastic Limit Load of Hole-Edge Crack in Plate under Biaxial Loadings Experimental Study of Electron Beam Welded QCr0.8 Bronze Joint Finite Element Analysis of Rolling Process for Pilger Mill Surface Modification of Magnesium Hydroxide by A-174 Silane The Impact of Sinter and Thermoprint on Film Formation of nanoTiO2 Slurry Design of Lead-Free Solders and Pollution Control of Lead Research on the Coating Surface Microstructure of Coated Paper Related to Binder Migration Effects of Thermal Transfer Paper Performance on Transfer Quality Finite Element Analysis of Temperature Filed and Stress Field of Reducer Describing the Influence of Ink Type on Ink Penetration and Distribution Numerical Optimization of the Parison Thickness of Oil Drum in Extrusion Blow Molding Research on the Relationship between Drying Method and Binder Distribution by Tracing Technique The Effect of Welding Materials on 1Cr18Ni9Ti and 2Cr13 Steel Welding Joints Fracture Microstructure Pattern Light-Gas Eccentrically High Speed Laser Cutting of Silicon Steel on Cold Rolling Production Line Interface Microstructure in Laser Welding-Brazing of AZ31B/TC4 Dissimilar Alloys Research of Milling Technique on V/Si by Mechanical Alloying Laser Glazed Color Surface on Whiteware Research on Mechanochemical of Silica and its Composite Powders Energy Grade Analysis of Liquefied Natural Gas Cold Energy Utilization Study on the Oxidation Degumming of Ramie Fiber Study on the Mechanical Property of Ramie Fiber in Different Temperature A Novel Design of Heat Exchanger for Epsom Salt Cooling Crystallization Modification and Application of Sodium Bentonite in the Coating of Color Ink-Jet Paper Chapter 15: Metallurgical Science and Technology Characteristics of the Sierra Leone High Alumina Iron Ore and Utilization in Sintering Determined the Activation Energy of the Decomposition of Calcium Carbonate by Nonlinear Isoconversional Method Study on the Coupling Behaviour of Microwave Absorption for Sulphide Concentrate Microwave Roasting Pyrite for Removal of the Sulfur and Arsenic Effects of Fuel on Gasification Dephosphorization of High-Phosphorus Oolitic Hematite Ore Study of Optimizing Combined-Blowing in EAF Based on K-Medoids Clustering Algorithm Kinetic Study on Sulfuric Acid Dissolution of NaxH2-xTiO3 from Sodium Hydroxide Molten Method Kinetics of Fe2+ Oxidization at Different Initial Fe2+ and Fe3+ Concentration in the Presence of Moderate Thermophilic Bacteria The Dissolution of Zinc Oxide Ore in Sulfamic Acid Solution Optimization of Soft Reduction Process for Continuous Thick Slab Casting Ca-Si Alloy Addition Followed by Acid Leaching as a Route to Solar-Grade Silicon Study on the Phase Composition and Particle Size of Boron Mud Study on Formation of Bottom Dross in Hot-Dip Zn-0.1%Ni Alloy Thermodynamics Study on the Disproportionation of AlCl in Vacuum Microstructure and Property of Plasma Sprayed TiB2 Wettable Coatings on Carbon Cathodes In Situ Observation of Inclusions Behavior in Molten State and Solidifying Interface of Tire Cord Steel Effects of Solid Solution Temperature on the Structure and Properties of TC16 Titanium Alloy Bars Effect of Semi-Solid Processing on Solidified Microstructure and Mechanical Properties of Rheo-Slurries A356 Sand Cast Elevated Temperature Tensile Behavior of Rheo-Cast 7075-T6 Al Alloy Produced by GISS Technique Chapter 16: Exploration and Extraction of Mineral Resources, Mining Engineering Process Mineralogy Study on a Sandstone Copper Ore Geologic Feature of Shilipo Copper Deposit in Xinjiang Experimental Study on Recovery of Nickel from Nickel-Bearing Laterite The Characters of Bairendaba - Huanggangliang Deposits, Inner Mongolia, China Research on Bulk Floatation Discarding Tailing of Copper and Zinc Polymetallic Sulfide Ores Geological Significance of the Volcanic Rocks in Weinan Area, Eastern Tianshan, China Effect of Feed Solids on High Gradient Magnetic Separation of Cylindrical Magnetic Matrix Study on the Relationship of the Quantity of CO2 Produced and the Wind Speed Application of Reservoir Geological Modeling in the Wang Longzhuang Block Synergic Surface Magnetization of Siderite on Hematite Arsenic Removal from Pyrite Cinders by Oxidizing Roasting with Sodium Hydroxide Addition Recycle of Spent Potlining with Low Carbon Grade by Floatation Floating Separation between Collophanite and Dolomite Affected by Inorganic Interaction The Effect of Ca2+, Mg2+, SO42- and PO43- on Phosphate Ore Flotation The Solution Chemistry of the Effect of the Dissolved Ions on the Flotation Process in Collophane-Dolomite System Theoretical Calculation of Dissolution Equilibrium for Cerussite in Pulp Solution Theoretical Calculation of Dissolution Equilibrium for Galena in Pulp Solution Effect of FeO Content in Ore on the Properties of Sinter The Experimental Research on Combining Binary Compound Flooding and Profile Control Technology to Improve Recovery Efficiency Nonlinear Regression Analysis of Binary Flooding Recovery Influence Factors Research and Implementation on Face-and-Body Detection of the Stray Current of Mine Application of Virtual Instrument Technology in Mine Hoist Control Based on the LabVIEW Study of Luming Molybdenum Mine West Zone EH4 Geophysical Prospecting and the Geological Structure Influence on Slope Stability Experiment Research of Luming Molybdenum Mine Rock Physical and Mechanical Properties The R&D of the Emergency Rescue Vehicles Based on Borehole-Type Refuge Chamber Chapter 17: Measurements and Modeling in Material Science The Revision of Paper Surface Efficiency and its Influences on Printing Qualities Projection Pursuit Regression Based on Hermite Polynomial for Atmospheric Corrosion Data Application An Electromagnetic Parameters Measuring System Based on a Concave Cylindrical Cavity Research on a Ultrasonic Detection Method about Disfigurements of Press Roll Fuzzy Prediction of Molten Iron Silicon Content in BF Based on Hierarchical System New Method of Distinguishing X-Ray Diffraction Curves about Laser Structure Non-Destructive Characterization of Welding Defects Using MMM and ACFM Methods Numerical Simulation and Die Optimization Design of Extrusion Process for a Complex Hollow Aluminum Alloy Multi-Hole Die Activity Calculation Model for Oxygen Converter Final Slag Numerical Simulation of Air Gap Formation in Water-Cooled Mold Casting Application of Electron Probe Microanalyzer (EPMA) to Depositional Environment Identification of Sedimentary Rock Microseismic Monitoring and Numerical Simulation Research of Floor Failure Depth in Extra-Thick Coal Seam Direct Current Heating Model for the Siemens Reactor CFD Simulation Research on Flow Characteristics of Fluidized Beds Study on Kinetic Characteristics of Solid-Liquid Two-Phase in Transporting Pipeline of Natural Gas Hydrate Numerical Simulation of Flue Gas Flow and NH3 Diffusion Properties in SCR System Numerical Investigation on the Stirred Reactor with Rushton Turbine Uncertainty Evaluation of Copper Reference Solution A Coaxial Measurement System for Electromagnetic Parameters at Microwave Frequencies Numerical Simulation of Projectile Material Phase Transformation during Penetration The Material Mechanical Properties Reverse Calculation Method Bases on Depth-Sensing Indentation The Use of Renka Cline Algorithm in X-Ray Diffraction Residual Stress Measurement

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB16017681
• ISBN:
  • 9783037859940
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v. (1872 p.)
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058