Progresses in fracture and strength of materials and structures : selected, peer reviewed papers from the Asian Pacific Conference Fracture and Strength 2006 (APCFS' 06), held at Sanya, Hainan Island, China during November 22-25, 2006

著者

• Asian Pacific Conference Fracture and Strength
• Zhou, Yu
• Tu, Shan-Tung
• Xie, Xishan

書誌事項

Progresses in fracture and strength of materials and structures : selected, peer reviewed papers from the Asian Pacific Conference Fracture and Strength 2006 (APCFS' 06), held at Sanya, Hainan Island, China during November 22-25, 2006

edited by Yu Zhou, Shan-Tung Tu and Xishan Xie

（Key engineering materials, v. 353-358）

Trans Tech Publications, c2007

• pt. 1

注記

Includes bibliographical references

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The collection coveres all aspects of fracture and strength of materials and structure, particularly of advanced materials ranging from nanoscale to macroscale and modern structural systems ranging from large scale plants to micro- devices.

目次

• Interface Strength of Low-Dimensional Nano-Components Metal Working and Dislocation Structures Shape Prediction of Fatigue Crack Based on a Given Stress Intensity Factor Distribution Fatigue Damage Accumulation of Welded Bridge Member during Crack Growth Propagation with Initial Crack Physical Models for Cleavage Fracture at Various Temperatures Study on Fracture Mechanisms of TiAl Alloys by In Situ Tensile Tests Dynamic Analysis of Antiplane Crack under SH-Waves in the Functionally Graded Materials Mode III Yoffe Dynamic Crack Problem on the Interface between Dissimilar Materials Morphology Evolutions of the Short Fatigue Crack Propagation of 1Cr18Ni9Ti Weld Metal The Grain Size and Porosity Dependent Constitutive Modeling for Nanocrystalline Ceramics with Small Plastic Deformation Study on Impact Fatigue Life of 42CrMo Steel with M+F Dual-Phase Structure Thermal Shock Properties of Ternary-Boride-Based Cladding Material Fatigue Reliability Research on RD2 Axle of Railway Freight Car Reconstruction of the Material Probabilistic S-N Relations with Given Confidence Study on Complete Stress-Strain Experiment and Destruction Characteristics of Rock under Lower Confining Pressure Three-Dimensional Elastic Stress Fields of Finite Thickness Plates with Elliptical Hole Failure Analysis of Outer Swirls in the Fuel Nozzle A New Model of Stochastic Crack Growth under Random Loading and Reliability Analysis of Fatigue Life An Effective Energy Criterion on Fatigue Crack Growth of Metal Materials The Evaluation of Fretting Fatigue Behavior in Room Temperature for INCOLOY Alloy 800 Effect of High Tensile Pre-Strain on the Torsional Fatigue Properties of a Structural Steel Failure Assessment Diagrams of Semi-Elliptical Surface Crack with Constraint Effect Contact Damage and Strength Degradation in Nitrided Pressureless Sintered (NPS) Silicon Nitrided Ceramics The Variation of Crack Energy Density (CED) on Creep Crack Growth Dynamic Fracture Behavior of Magnesium Alloy Fatigue Properties of Nanometer-Scale Copper Films High Speed Fracture Phenomena in Dyneema Composite Fatigue Properties of Ni-Base Superalloy in Long Life Region Assessment of Fatigue Life for High-Temperature Pipeline Welds Using X-Ray Diffraction Technique Effect of Contact Pressure and Cyclic Stress Amplitude on Fretting Fatigue of 45-Carbon Steel Room Temperature Creep and its Effect on Fatigue Crack Growth in a X70 Steel with Various Microstructures A Study on Fatigue Behavior of SM490A Steel under Low Temperature Plastic-Factor for the Fracture Toughness Test of the SA508Cl.1a Narrow-Gap Welding Part Fatigue Life Estimation of Leakage for Excitation and Internal Pressure in Brazed Joints Fatigue Crack Propagation Behavior Near Fusion Line between SA508 Steel and Ni-Based Buttering Metal Growth Pattern Study of Closed Surface Flaw under Compression Improvement of Fatigue Strength of Stainless Steel by Using a Cavitating Jet with an Associated Water Jet in Water The Effect of Different Material Parameter Functions in Non-Homogeneous Regions on Eigen-Functions of Crack Tip Fields Effect of Mean Stress on Fatigue Strength of Non-Combustible Magnesium Alloy Influence of Testing Frequency on Fatigue Crack Growth of 6061-T6 Aluminum Alloy in Hydrogen Gas Environment Fatigue Characteristics of Vulcanized Natural Rubber for Automotive Engine Mounting Fracture Mechanics in Design Guidance and Practice Effect of Water Height for Modal Characteristics of the Fuel Channel and Stiffness Analysis Using Modal Test Results Study on Life Prediction Method for Creep-Fatigue Interaction at Elevated Temperature The Fatigue Life Prediction of Multidirectional Laminated Composites Effect of Shot Strip Interval and Shot Times on Laser Shot Peen-Forming with Repetition Laser Pulse Isothermal LCF Behaviors of a NiCrAlYSi Coated Columnar-Grained Directionally Solidified Nickel Base Superalloy Fatigue Property for the Powder Metallurgy Beryllium-Aluminum Composite Materials Tearing Energy for Crack Growth at the Bonds of Cylindrical Rubber Bushes Subjected to Axial Shear The Effect of Hybrid Surface Modification
• Combination of Fine Particle Bombardment Treatment and Nitriding, on Fatigue Properties of Steel Characteristics and Mechanism of High pH Stress Corrosion Cracking of Pipeline Steel X70 Stress Corrosion Cracking of Pipeline Steel in Soil Environments of Eastern China Influence of Loading Frequency on Fatigue Behavior of High Strength Steel A Crack in an Electrode Layer between Two Dissimilar Piezoelectric Materials Investigations on Fatigue Properties of Die Cast Magnesium Alloy AZ91HP at Very High Cycles An Experimental Investigation of Interface Fracture Characteristic of APS Thermal Barrier Coating System under Bending at 1000 DegreesC Fatigue Properties of Austenitic Stainless Steel with Circumferential Notch Ductile Crack Propagation Characteristics in Thin Steel Tubes Experimental Study of the Effects of Surface Defects on Rolling Contact Fatigue Behavior The Non-Local Theory Solution of a Crack in the Functionally Graded Piezoelectric Materials Subjected to the Harmonic Anti-Plane Shear Stress Waves Crack Problem for a Functionally Graded Orthotropic Coating-Substrate Structure Influence of Plasma Radical Nitriding on Fatigue Properties of SCM435 Steel Effect of Physical Property of Water on SCC Growth Rate of 316L Stainless Steels in High-Temperature Water Influence of Deposition Bias Voltage on Fatigue Cracking Behavior of Chromium Nitride Film Deposited on Steel The Relation of the Interlaminar Fracture Toughness and the Acoustic Emission (Ae) under the Enf Test Fatigue Lives of a Ferritic Stainless Steel Containing Deformation Twins Shear-Type Fatigue Crack Growth in SAE52100 Steel Effect of Extrusion Ratio on Fatigue Properties of Hot-Extruded Magnesium Alloys Effects of Microstructures on Strength and Fatigue Properties of Long-Term-Serviced F12 Steels Fatigue Properties of Surface-Micromachined Al-3%Ti Thin Films Life Evaluation of a Disk Brake of Railway Vehicles Considering Pressure Distributions at a Frictional Surface Crack Formation of Ceramic Thin Film on Polymer Substrate Investigation of Mechanical Stability of Thermally Aged a-c:H DLC Films with Different Precursor Gases Thermal Fatigue Properties of the Fin in the Boilers Distributions of ' Martensitic Phase Transformed on Fracture Surfaces of SUS 304 Stainless Steel Having Through- and Part-Through-Thickness Fatigue Cracks An Analysis of the Fatigue Strength of Metals Containing Small Defects Study on the Effect of Cl- Concentration on the Corrosion Fatigue Damage in a Rolled AZ31B Magnesium Alloy by Acoustic Emission The Method to Determine the Expression for Fatigue Curves Effect of Fusing Treatment on Fatigue Strength of Thermally Sprayed Steels with Co-Based Self-Fluxing Alloy Coating Pure Bending Testing of Cr-Mo Alloy in Metal Dusting Condition Bending Strength of Al2O3 Ceramics for Textiles Machinery and Elastic Wave Characteristics by Wavelet Analysis Study on Strengthening of the Solid Contact Alloy CuW80/Cu Analyzing the Microstructure and Tensile Properties of an Al8Si0.35Mg Cast Alloy with Prolonged Aging Effect of Solution Treatment Temperature on Properties of an Al11Si3Cu0.35Mg Cast Alloy Theoretical Analysis and Experimental Research on the Braced Stress of Vacuum Glazing Young's Modulus of In Situ TiB Whiskers in Ti Metal Matrix Composites Generalized Drucker-Prager Strength Criteria Separation of Primary Stress in Finite Element Analysis of Pressure Vessel with the Principle of Superposition A Proposed Thickness Distribution of Elbow Resisting Ratcheting Study on the Strength of Jointed Rock Mass Effects of Chemical Compositions of the Submerged Arc Welding Wires on Impact Toughness of the Weld Metals for the Pipeline Steel Stress Distribution of the Composites Reinforced by Slub-Like Short Fibers Strength and Toughness of 1.1wt% Li-Containing Al-Zn-Mg-Cu Alloys Experimental Studies of Non-Equilibrium Grain-Boundary Segregations of Phosphorus under Low Tensile Stresses Influence of Residual Stresses on the Interfacial Toughness Measurement by Cross-Sectional Nanoindentation Micorstructure and Properties of 2Cr16Ni2MoN Stainless Steel Stress Relaxation Testing For Analysis of 12Cr1MoVG Steel for Creep Strength Evaluation Compressive Deformation Behavior of the Ferritic Oxide Dispersion Strengthened Alloys at Elevated Temperatures Evaluation of Critical Fracture Stress in Low Alloy Steels by Finite Element Analysis of Small Punch Test Empirical Correlation between Parameters from Small Punch and Tensile Curves of Mn-Mo-Ni Low Alloy Steels by Using Test and FE Analysis Structural Strength and Buckling Analysis for a Steel Derrick after its Members Removed Partly Strengthening of Cu-Ti2SnC Composites due to Microstructural Changes in the Material Impact Toughness of Titanium Alloys with Different Strengthening Methods Strength Calculation of the Screw Conveyor of a Decanter Centrifuge under Normal Operation Conditions The Effect of Heat Treatment on the Properties of LF9 Alloy Creep Behavior of Functionally Graded Material under In-Plane Bending Moment Experimental Study on Residual Stress of K24 Superalloy in Laser Cladding Zone by Laser Shock Processing Effect of Tungsten Addition on Properties of Ni-Based Alloy Sheet Prepared by EB-PVD Influence of Oxidation to Small Punch Creep Test Tensile Properties and Fracture Characteristics of Spray Deposited Ni3Al-Based Superalloy(IC6) Compressive Properties of Quartzite Microcrystallite Glass Ceramics Finite Element Study of Factor Effects on Residual Stresses and Thermal Deformation of Brazed Plate-Fin Structure Research on Physical Significance of the Larson-Miller Parameter and its Electron Theory for Heat-Resistant Steels Microstructure and Tensile Properties of Oxide Dispersion Strengthened Molybdenum Alloys Prepared by Different Doping Process Crack Growth in Stainless Steel 304 under Creep-Fatigue Loading Effect of Microstructure on Thermo-Mechanical and Isothermal Low Cycle Fatigue Failures of a Single Crystal Ni-Base Superalloy Residual Stress Characteristics of Plasma Sprayed CoNiCrAlY Coatings by X-Ray Diffraction The Study on Failure Behavior and Low Cycle Fatigue Life of Hot Gas Casing for Gas Turbine Microstructure and Strength of Oxidation-Bonded Porous Silicon Nitride Ceramics Microstructure and High Temperature Stress Rupture Properties of Ru-Containing Directionally Solidified Ni-Base Superalloy Microstructural Evolution during Tensile Creep of a Single-Crystal Nickel-Base Superalloy Effect of Original Microstructure on the Hot Compression Behavior of Superalloy 718 Welding Characteristic Evaluation of GMAW and Laser Cladding for the Gas Turbine 1st Blade A Study on the Degradation of the Superalloy Inconel 718 Using Ultrasonic Technique Characteristics of High Temperature Tensile Properties and Residual Stresses in Welded Joints of the SM570-TMCP Steel Creep Model Based on Theta Projection and Omega Method for Predicting the Creep Behavior of Alloy Segregation of Alloying Elements of Directionally Solidified Nickel Based Superalloy CM247LC during Creep Degradation Process Artificial Neural Network Models for Predicting Flow Stress and Microstructure Evolution of a Hydrogenized Titanium Alloy Fatigue Crack Growth Rate in Low K Range According to the Microstructure and Temperature in P122 Alloy Weldment Quantitative Characterization of Microstructure of Thermal Deformed TA15 Titanium Alloy by EBSD Uniaxial Cyclic Deformation Behaviors of 42CrMo Steel with Different Heat-Treatments Characteristics of Strength and Deformation of Inner/Outer Local Wall Thinned Straight Pipes Comparison of the Tensile Performance of Polymer PC and PC/ABS Microstructure Reconstruction and Numerical Simulation of Deformation in Particle-Reinforced Composites Deformation Behavior of Metal Rubber Material Effect of Plastic Deformation at Room Temperature on Powder RE-Chrome-Boronizing for Medium Carbon Steel Texture Evolution of Rolled AA3003 Alloy Sheets after Annealing Long Wavelength Buckling of Cubic Open-Cell Foams Subjected to Uniaxial Compression Stiffness and Thermal Conductivity of Carbon Nanotube Containing Aluminum A Thermal Damage Model of UHMWPE Microstructure and Tensile Properties of a Mg-Zn-Y-Zr Alloy Containing Quasicrystal Phase Processed by Equal Channel Angular Pressing An Experimental Investigation on the Tensile Behavior of Silane-Modified MMT/Epoxy Nanocomposites Failure Analysis of Al1060 Sheets under Double-Sided Pressure Deformation Conditions Surface Morphological Changes in CP-Ti and SUS316L under Pure Tensile Loading and Creep Development of Constitutive Equation for Infinite Body of Impact Problem Tensile Behavior of Photonic Crystal Fibers Influence of Temperature and Heat-Aged Condition on the Deformation Behavior of Rubber Material Using SHPB Technique with a Pulse Shaper EBSD Analysis and Theoretical Prediction of Twin Orientations during Compression in Mg-3Al-1Zn Compressive Deformation of ZK60 Magnesium Alloy at Elevated Temperature Research on the Effect of Entry Angle and Pressure-Pad Force on Deep-Draw Thermo-Rheological Forming of a TC1 Ti-Alloy Sheet Texture Development during Cold and Cryogenic Rolling in AA 7055 Aluminum Alloy Dynamic Restoration Process of 7050 Aluminum Alloy during Superplastic Deformation DRX in 7050 Aluminum Alloy during Constraint Deformation Processing at High Temperature Compressive Deformation in Aluminum Foam Investigated Using a 2D Object Oriented Finite Element Modeling Approach In Situ Measurement of Lattice Spacing of Ternary Ni-Ti-Nb Alloys during Hydrogen Absorption Acoustic Emission Investigation of the Anelastic Recovery Behavior of Basal Plane Textured AZ31B as a Function of Loading Direction Formability Analysis of the Mg-Alloy AZ31 Influence of Collision Velocity and Angle on Bullet Deformation Investigated by Reconstruction and FEM Analysis Stress-Assisted Atomic Migration in Thin Copper Films Deformation Behavior and Strength of Beam-To-Column Connections in Steel Portal Frame Effect of an Electric Field on the Texture and Microstructure Evolution during Annealing of High Reduction Cold-Rolled Ni Characteristic of Deformation of Ti-6Al-4V Alloy with Hydrogen at High Temperature Study on Cavity Growth in Uniaxial Tension of ZK60 Magnesium Alloy High Temperature Deformation Mechanism of 7075 Aluminum Alloy Effect of Extruding Technology on Microstructure and Properties of Al-Li Alloy The Influence of Aging Process on Microstructures and Properties of an Al-2.54Li-1.61Cu-1.23Mg-0.22Zr Alloy The Influence of Pre-Annealing on Recrystallization in Heavily Cold-Rolled Nickel Deformation and Annealing Textures of Extruded and Cold Rolled Pure Ni Single Crystals of Cube Orientation Grain Orientation Dependence of Extended Planar Dislocation Boundaries in Cold-Rolled Polycrystalline Aluminium Researches on Microstructures and Mechanical Properties of Extruded Mg-Zn-Zr-Y Alloy The Effect of Heat Treatment on Microstructure and Mechanical Properties of ZK60 Alloy Research on Hot Upsetting Deformation Behavior and Dynamic Recrystallization for AZ31 The Grinding Force Measure and Analysis on the Abrasive Belt Grinding to Magnesium Alloy The Mechanical Property and Microstructure of Ti-4Al-2V Alloy after High Speed Shot Peening Treatment A Preliminary Model Accounting for the Suction Pressure in CMP Process Tilt of Atomic Force Microscope Cantilevers: Effect on Friction Measurements The Application of Wavelet Theory in Analysis of Surface Topography of Rifle Worn Marks The Estimation of Barrel-Rifle Surface Wear Based on Fractal Theory Nonlinear Dynamics of Mechanical Systems with Sectional Frictions Friction Characteristics between Two Bodies under the Vibration Working Condition and their Applications Study on Characteristics of Vibration Friction for Pile-Soil System The Effect of the Microstructure on the Wear-Resistance in the Welding Deposited Metal Capillary Adhesion between the Micro-Cantilever and the Substrate Fracture Toughness Calculation by Movable Cellular Automata Method Temperature Effect on the Friction Behavior of NiTi Shape Memory Alloy Gear Abrasion-Induced System Vibration Tribological Properties of MoS2-Coated Gray Cast Irons with Some Different Matrix Phases under the Boundary Lubricating Conditions Wear Mechanism of Ti(C, N)-Based Cermet Cutting Tools in the Machining of Normalized Medium Carbon Steel AISI1045 Influence of Laser Micro-Mesh Texturing on the Tribological Performance in an EHL Point Contact Reciprocating Triboligical Behavior of PA1010 Filled with ZnOw Unequal Interval Grey Forecast of the Rate of High Temperature Abrasion of Water-Wall Tubes in Circulating Fluidized Bed Boilers Research on Nano-Mechanical and Micro-Tribological Behaviors of C+- Implanted Silicon A Study on Diffusion Wear of Machining Tool and Simulation by Diffusion Couple Analysis of Fretting Problems Using a Numerical Method Based on Cauchy Singular Integral Equation Tribological Behaviors of Bulk Metallic Glasses A Simulation of Hydrodynamic Lubrication on Non-Glazed Surfaces under Different Sliding Velocities and Loads Fracture Healing in the Presence of Polyethylene Wear Debris and Oestrogen Deficiency Effect of Tempering on the Wear Characteristics of Induction-Hardened SPS5 Steel Effect of Sliding Speed and Applied Load on the Wear Behavior of Thermally Sprayed Ni-Based Self-Flux Alloy Coating Sliding Wear Behavior of Al/SiC Composites Fabricated by Thermal Spray Process Against Different Counterparts Microstructure and Wear Behavior of Thermally Sprayed Fe-Based Amorphous Coating Tribological Behavior of Phosphor Bronze against SAE52100 Steel under Different Lubricants Effect of Stress Relief Groove Shape on Fretting Fatigue Strength The Rolling Contact Fatigue Wear of Nylon Composites Filled with Metal-Oxides Stress Analysis of Bonded-Interface Technique on Subsurface Damage Observations of Brittle Porcelains Composite Fretting Wear of Aluminum Alloy Fretting of Human Axial Cortical Bone Tribological Behavior of Laser-Cladding Ni60 and Co-Cr-W Coatings at Elevated Temperature Fretting Fatigue Strength and Life Estimation Considering the Fretting Wear Process The Contact Resistance and Arc Erosion Behavior of Separable CP-Nb-Cr/Cu-Cd Electrical Contact Material Compared Study on Laser Cladding and Plasma Spraying of Nuclear Valve Clacks Sliding and Loosening Behavior of Thread Joints under Transverse Loading Tribological Behaviour of Ceramic Coatings Formed on Titanium Alloy through Miro-Arc Oxidation Technique An Experimental Study of Excavation Damaged Zone in Anisotropic Rock Fatigue Analysis and Life Prediction of Dumpers with Cumulative Fatigue Damage Approach and Finite Element Model Numerical Analysis on Surface Fractures in Two-Layered Materials Subjected to Thermal Loading Influence of Duration of Stress Wave on the Spallation Process in Inhomogeneous Material Three Dimensional Numerical Approach to Splitting Failure of Rock Discs Hot Spot Stress Analysis of Fatigue for Tsing Ma Bridge Critical Members under Traffic Using Finite Element Method Study on Dynamic Behaviors of Thin Plate Structure by DBEM Numerical Simulation on Cracks Propagation and Coalescence Process in Rock The Influence of Stress Ratio on the Fracture Behavior of Brittle Materials Numerical Model for Thermal Cracking of Concrete Digital Image Based Modeling of Rock Failure at Meso-Scale Numerical Simulation of 3-D Failure Process of Reinforced Concrete Specimen under Uniaxial Tension Study of Interface Problems Using Finite Element Method Stress Intensity Determination for MSD Riveted Stiffened Panels in the Presence of Corrosion Numerical Simulation on AE Characteristics of Rock and Concrete Materials Atomistic Finite Element Simulations on the Tensile Properties of Polyhedral Oligomeric Silsesquioxane (POSS) Reinforced Polystyrene Atomistic Simulation of Crack Initiation at Bi-Material Interface Edges Fracture-Damage Model for Anchored Discontinuous Jointed Rockmass and its Application Research on Rubbing Fault in a Dual-Disc Overhung Rotor-Bearing System Study on the Modelling of Microstructure for Polycrystalline Materials Modelling the Behavior of Short Fatigue Cracks under Variable Amplitude Loading Using FEM Simulation on the Short Fatigue Crack Initiation of LZ50 Axle Steel for Railway Vehicles Numerical Simulation on Fracture Formation on Surfaces of Bi-Layered Materials A New Numerical Method for General Failure Probability with Fuzzy Failure Region Improved Line Sampling Reliability Analysis Method and its Application A Fast Approximate Method for Reliability Sensitivity Based on Markov Chain Simulation Iterative Algorithm for Structure Reliability Analysis Based on Support Vector Classification Method Nonlinear Finite Element Analysis of Crack Tip of Rubber-Like Material Research of Fatigue Life Simulations Applied to Large Complex Structure Evaluation of Cracked Beam-to-Column Connection from Brittle Failure Using Finite Element Method Using Transfer Matrix Method and Immune Algorithm to Identify Cracks in Segmented Beams Predictive Model Based on Genetic Algorithm-Neural Network for Fatigue Performances of Pre-Corroded Aluminum Alloys Finite-Element Simulation and Analysis on High Velocity Impact Damage of Aircraft Panel Structure Numerical Simulation of Pressure Grouting in Soil Nail Pull-Out Tests Numerical Simulation of Rock Stability under Dynamic Blasting Load Numerical Simulation of Fracture Process Zone in Concrete Tension Specimen Numerical Studies of End Effect on Crack Propagation Behavior of Brittle Specimen Containing Pre-Existing Crack under Uniaxial Compression On the Relations between the Threshold Values of the Fatigue Crack Growth and the Cyclic Deformation Behavior of Materials Determination of Growing Direction of Fatigue Crack Investigating Morphology Evolution of Damage by a Cellular Automaton Modelling Thermal Strength Evaluation of the Super Alloy Structure with Various Thermal Insulation Performances by FEM and Stress-Rupture Experiment Monte Carlo Simulation of Stress Corrosion Cracking in Structural Metal Materials Taking Account of Surface Crack Effects Dynamic Analysis and Three-Dimensional Finite Element Simulation of Cracked Gear On the Stress Intensity Factor of Cracks in Residual Stress Field Finite Element Analysis of Blower Impeller Using Cyclic Symmetry Discrete Dislocation Dynamics Simulation on Strengths of Dislocation Network Stacks in Multilayered Structures Fatigue Strength of Metals Containing Inclusions and Phase Inhomogeneity Numerical Simulation on Rolling Contact Fatigue with Dent at Rolling Surface Numerical Investigation on the Fracture Behaviors of Three-Dimensional Functionally Graded Materials Simulation of Deformation Behavior in Aluminum Alloys Having Bimodal Structures Based on the Theory of Crystal Plasticity Considering Dislocation Distributions The Evaluation of the Effects of the Maximum Stress Intensity Factor for Fatigue Crack Opening Behavior by Finite Element Analysis Numerical Simulation of Thermal Stress Field of Arc-Shaped Thermal-Protection Component Application of Percolation Theory to Rock Damage and Fracture Experimental Study on Forming Underground Space in Soil Using Explosive Lining Method Analysis of Slant Surface Cracks with Step Notches Subject to Contact Loadings by a Variational Boundary Integral Method Effects of Joint Width on Strength, Stress-Strain Curve and Strain Localization of Rock Mass in Uniaxial Plane Strain Compression Failure Process and Stress-Strain Curve of Plane Strain Rock Specimen with Initially Random Material Imperfections A Statistical Analysis on the Fatigue Life Characteristics of Structural Materials Damage Analysis of Medium Carbon Steel in Low Cycle Fatigue A Simple Plastic-Damage Model for the Cement-Soil Admixture Generalized Thermoelastic Responses of a Piezoelectric Rod Subjected to a Moving Heat Source A Generalized Magneto-Thermoelastic Coupled Problem Study of Damage Mechanism on Aluminum Alloy under Two Kinds of Stress States and FEM Simulation Geometrically Nonlinear Deformation of Circular Sandwich Plates under Transversely Non-Uniform Temperature Rise Investigation to the Effects of Grain Misorientation on the Performance of Short Cracks Relationship between Fracture Mechanism and Microstructure in PLA/PCL Polymer Blends Failure Mechanism and Mechanical Characteristics of Rockmass Containing Close Intermittent Joints under Plane Stress Condition Nonlinear Dynamics of a Spur Gear Pair with Fault The 3D-Crack Growth Mechanism of Brittle Material under 3D Compression Study on Micro-Mechanism of Crack Initiation and Propagation Induced by Inclusion in Ultra-High Strength Steel Calculation and Analysis on the Thermal Damage at High Temperature Wavelet-Based Modal Parameter Identification through Measurements for Damage Detection Evaluation of a Strain Energy Equivalence Principle (SEEP)-Based Continuum Damage Model The Fracture Mechanism of As-Cast and Extruded SiCp/AZ91 Composites Fabricated by Stir Casting Effect of Residual Stress Field in Front of the Slant Precrack Tip on Bent Fatigue Crack Propagation Estimation of the Elastic-Plastic Fracture Behavior of Fiber Reinforced MMC According to the Change of Interfacial Characteristics Effect of Microstructure on Small Fatigue Crack Initiation and Propagation Behavior of Ti-6Al-4V Alloy On Probabilistic Fatigue Crack Growth Behavior under Constant Amplitude Loads A Study on the Mechanism of Small Fatigue Crack Deflection Behavior in Alpha-Brass by Means of In Situ Atomic Force Microscopy and Crystallo-Graphic Orientation Analysis Viscoelastic Deformation of PC/ABS Alloy Combustion Synthesis of ZrW2O8 and Preparation of its Composite with Near Zero Thermal Expansion Study on Reliability Design of Fiber Wound Reinforced Plastics Pressure Vessel Development of a New Kind of Sealing Composite Material Reinforced with Aramid and Pre-Oxidized Fibers Uniaxial and Multiaxial Cyclic Deformation Behaviors of SiCp/6061Al Alloy Composites Study on the Fracture Energy and Fracture Toughness of the Polypropylene Fiber Reinforced Concrete Fabrication and Properties of a Novel Anti-Radiation BaPb0.6Ce0.4O3/Al Composite Effect of Mechanical Activation on the Morphology and Microstructure of Ni-Al-Ti-B Composite Powders Finite Element Analysis about Effects of Particle Size on Deformation Behavior of Particle Reinforced Metal Matrix Composites Effect of Mg-Based Spherical Quasicrystals on Microstructure and Mechanical Properties of ZA85 Alloy Analysis and Design of Curved Laminated Composite Panels under External Pressure Investigation on the Primary Si Phase Solidification and the Properties of SiCw/Al-18Si Composites Effect of Interphase on Properties of Reaction Sintering Cf/SiC Composites Influence of Extrusion Temperature on Microstructures and Mechanical Properties of Bi2O3-Coated Al18B4O33 Whisker Reinforced Al Composites Effect of Temperature on Strain Softening Behavior of Composites with Small Misaligned Whiskers Measurement of Delamination Strength of Thermal Barrier Coating at High Temperature by Edge-Indent Test Analytical Solutions for Residual Stresses of Functionally Graded Medium with Inhomogeneity Damage Monitoring of Thick CFRP Beam Using Electrical Impedance Changes Biodegradable Composites Based on Polylactic Acid (PLA) and China Jute Fiber Free Vibration of Composite Annular Plates Embedded with SMA Fibers in the Circumferential Direction Formation of Cf/C Composites with SiC Concentration Gradient on the Surface by SHCLD Technique Effects of Polarization Treatment on Mechanical Properties of Al2O3/LiTaO3 Composite Ceramics Microstructure and Hardness Performance of a SiCp/Al Composite by Pressureless Infiltration Technique Effect of Heat-Treatment on the Mechanical Properties of TiB2P/2024Al Composite Influence of Nowonty Phase on the Fracture Toughness of SiC/MoSi2 Composites Statistical Damage Detection of Laminated CFRP Beam Using Electrical Resistance Change Method Effect of Solution Treatment on Tensile Properties of AA2024 Matrix Composite Reinforced with Magnesium Borate Whisker Laser Processed Intermetallic Matrix Composite Coatings on Ni-Based Superalloy Substrate Effect of ECAP on the Microstructure and Tensile Property of SiCp/AZ91 Magnesium Matrix Composite Experimental Study on the Mechanical Properties of Metal Oxides Filled PA1010 Composites Mechanical Alloying Influence on the Sintering of Cu-Fe Compound Powders The Action Mechanism of Preparation of Calcium Carbonate/Titanate Composite Material by Mechano-Activated Method Preparation of Characterization of Calcium Carbonate/Titanate Composite Material by Mechano-Activated Method The Spectroscopy Characterization of Kaolinite-Organic Intercalation Materials The Kinetic Analysis of Thermal Decomposition of PMMA/MMT Nanocomposites Some Crystallographic Features of the Boron-Doped Diamond Single Crystals Synthesized by Fe-Ni-C-B System under HTHP Fabrication and Mechanical Properties of Carbon Nanotubes/Epoxy Resin Composites Prepared by a Sonication Technique Fracture Characteristic of Mg-Al-Zn-Al2O3 Composites FRP Fracture Simulation Using Parallel Processing on a PC Cluster Time-Temperature-Stress Equivalence Applied to Accelerated Characterization of Creep Behavior of Viscoelastic Polymer Microstructure and Mechanical Properties of High Strength Al2O3p/6061Al Composites Effects of Packing Density of Micropowders on the Compressive Strength of Cement Pastes Influences of Micropowder Gradation on Rheological Properties of Cement-Based Composite Pastes Mechanical Properties of SiCp/Cu Composites Prepared by Electric Conduction Sintering Stress-Strain Response in SiC/SiC Composites under Cyclic Loading Study on Solvent Debinding Process of Powder Injection Molded Ti(C, N)-Based Cermets Preparation of Novel Aluminum Hybrid Composite Containing Aluminum Borate Whiskers and Carbon Nanotubes Modeling and Testing Strain Rate-Dependent Tensile Strength of Carbon/Epoxy Composites Diagnostic Method for Delamination Monitoring of CFRP Plate Using Kriging Interpolation Method Monitoring of Delamination of the CFRP Beam by the Smart Structure System Using the SI-F Method Influence of Mischmetal on Performance of Copper Based Electric Contact Materials Stress Field of Fiber-Reinforced Composites with Graded Interphase Microstructure Formation Mechanism of (Al2O3+TiB2+Al3Ti)/Al Composites Fabricated by Reactive Hot Pressing An Experimental Investigation on Composites Through-The-Thickness Stitched Foam Core Sandwich Panels Mechanical Properties of (Al2O3+Ni) and (Al2O3+Ni)/Ni Laminated Materials Study on Process Parameters of Multi-Factor Coupling Fields CVI Influence of Fiber Orientation and Volume Fraction on Tensile Strength and Fatigue Life of CARALL Hybrid Composite Mechanical Properties of High Reinforcement Content TiB2p/Al Composites under Quasi-Static and Dynamic Loading Mechanical Force Induced Grafting Effect on Strengthening HDPE/GF Composites with Maleic Anhydride Fabrication and Dynamic Mechanical Properties Offly Ash/Epoxy Composites Mechanical Properties of Interpenetrating Graphite/2024Al Composites Produced by Improved Squeeze Exhaust Casting Flexural Strength of Superfine Grained Si2N2O-Si3N4 Composites Thermal Physical Properties of Bulk Materials from ZrO2 Nanoparticles by Sintering Process Synthesis and Magnetic Properties of Polymer Derived Metal/SiCN Ceramic Composites Microstructure and Mechanical Properties of 2D Tyranno SA/SiC Composites by Hot Pressing The Micromechanical Stress Field of Cermets Composite Containing Interfacial Arc-Microcracks Influence of Sintering Aids on the Nitridation of Reaction Bonded Si3N4/BN Ceramics In Situ Combustion Synthesis of h-BN-SiC High-Temperature Ceramics BBPPAmorphous Si-B-C-N Ceramics Fabricated by High Energy Ball Milling and Hot Pressing Internal Friction of a 2D-C/SiC Composite from 25 DegreesC to 400 DegreesC Electrically Nonlinear Fracture Analysis of Piezoelectric Materials Based on CED (Crack Energy Density) Synthesis and Properties of AlN-SiC-TiB2 Ceramics by SHS-HIP Investigation on Large-Sized Sapphire Crystalline Perfection by X-Ray Double-Crystal Diffraction Method In Situ Toughened -Sialon Ceramics Doped with Lutecia and Ytterbia Influence of Nano-Silica on Microstructure and Mechanical Properties of SiO2/BN Ceramics Microstructures of ZrO2 (3Y) Ceramics after Dynamic Impact Glass-Forming Ability, Interface Joint Strength and Thermal Properties of Sealing Glasses for SOFC Influence of 3Y-TZP on Microstructure and Mechanical Properties of Al2O3-Based Composites Effect of Electromechanical Loadings on Fracture Strength of Piezoelectric Ceramics Effects of Notch Size on Strength Distribution of Ceramic Components Effects of Particle Distribution on the Residual Thermal Stresses of (W,Ti)C/SiC/Al2O3 Ceramic Composite Bi-Axial Flexure Strength, Weibull Modulus and Fracture Mode of Alumina Glass-Infiltrated Core/Veneer Ceramic Composites Fabrication and Microstructure of SrBi2Ta2O9 Ceramic Mechanical Properties of ZrB2-Based Ceramics Reinforced by Nano-SiC Whiskers Analysis of a Thin Electrode Layer between Two Dissimilar Piezoelectric Solids Effect of Sintering Process on Fabrication of Porous Si3N4/SiC Composites Microhardness and Machinability of Fluorphlogopite-Mullite Glass-Ceramics Tribology of Titanium Boride Sliding against Silicon Carbide at Elevated Temperatures The Group Velocity Change in the Unidirectional Composite Materials Effects of Preparation Processing on Mechanical Properties of TiAl Intermetallic Influence of Y and Ba on Microstructure and Mechanical Properties of AZ91 Magnesium Alloys Research on Weldability for Dual-Phase Steels Using Servo Gun Spot Welding System Effect of Annealing Temperature on Microstructure and Properties of Surface Nanocrystalline Structure in Low Carbon Steel Specimen Ageing Processes of Li-Containing Al-Zn-Mg-Cu Alloys Microstructural Evolution of Inconel 690 Alloy for Steam Generator Tubes Study on Pressure Variations in the Mold of Magnesium Alloy Die Castings High Dense Compressive Residual Stress Produced in Laser Shock Processing on Ti6Al4V Alloys Study on High Performance Warm Compacted Fe-2Ni-2Cu-1Mo-1C Powder Metallurgy Materials Nickel Silicides Synthesized by High Energy Ball Milling Study on the Microstructure and Properties of Prehardened Plastic-Mould SWFT Steel for Big Section Uniform Design and its Application in the Chemical Composition Design of Hot Work Die Steel Microstructure of Fe-Based ODS High-Temperature Alloy Sheet Prepared by EBPVD Effect of Hot Treatment Process on High Performance Alloy Spring Steel D701 Mechanics Properties Investigation of the Anti-Corrosion Ceramic Coating Formed on AZ91D Magnesium Alloy by Micro-Arc Oxidation Tensile Properties and Fatigue Strength of Ultrafine Grained Pure Copper Precipitation Behavior of Warm-Rolled Ti-Stabilized Interstitial-Free (IF) Steel Sheets Mechanical Properties and Microstructures of Ferritic-Rolled Ultra-Low Carbon (ULC) and Ti-Stabilized Interstitial-Free (Ti-IF) Steels Thermodynamic Analysis of EB-PVD Preparing SiC Coating Investigation on Residual Stress and Crystallographic Texture of YSZ Films Prepared by EB-PVD Simulation on Temperature Distribution in Chemical Mechanical Polishing The Improvement of Corrosion Resistant for the Cf/Al Composites by Ni-P Coatings HA Active Coating on Titanium Prepared by Spark Plasma Sintering A Theoretical Model for Squeeze Film Dampers Operating with Air Entrainment Fractal Features of Surface Morphology of Uneven Eroded Hot-Dip Galvanized Steel Study on the Carbides and the Interface Bonding in Surfacing Welding Metal Development of Coating Material by In Situ Reaction Synthesis The Microstructure and Mechanical Properties of Ti/TiN Multilayer Film Synthesized by Unbalanced Magnetron Sputtering Deposition on 17-4PH Stainless Steel Prevention of Stress Corrosion Cracking in Welded Joint of Type 304 Stainless Steel by Laser Peening Study on Surface Metallurgy High Speed Steel Using Double Glow Plasma Technique Preparation and Wear Resistance of TiN/Ti Deposition and Diffusion Multi-Layers by Plasma Alloying Process Microstructure and Properties of Ni3 (Si, Ti) Intermetallic Cladding with Nb Addition Microstructure and Properties of Low Temperature Deposit CrxN Using Unbalanced Magnetron Sputtering Microstructure and Optical Properties of Ag/TiO2 Multilayers Mechanical Properties of Coil Coating Evaluated with Dynamic Mechanical Analysis in Daul Cantilever Study On the Corrosion Resistance Properties of the Ceramic Coating Obtained Through Microarc Oxidation on the Aluminium Alloy Surface Study on Properties of Plasma Sprayed CoCrAlYCoating on TiAl Alloy Surface Plasma Surface Alloying Process of a Fe-W-Mo-Co Surface Age Hardening High Speed Steel Microstructure and Hardness of the Laser Surface Treated Titanium A Special Method to Evaluate the Strong Adhesion between Brittle Coating and Ductile Substrate Coating Influence on Residual Stress in Laser Shock Processing Influence of Ceria on Characterization of Films Prepared by Vapor Deposition of Quasicrystal Application of Wear Resistant Coating Technology on Coating Blade Research on High Temperature Anti-Abrasion Protection Technology of Thermocouple Cannula Study of New Metal/Ceramic Cored Wires Plasma Nitriding Behavior of 1Cr18Ni9Ti Stainless Steel with Nanocrystalline Surface Induced by SMA Thermal Vibration of Functionally Graded Circular Plates Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature Friction and Wear of Lubricated Sliding Surfaces of Coated Vane and Flange in Rotary Compressor with Carbon Dioxide as a Refrigerant CrN Coating on Magnesium Alloy AZ91 by Arc-Glow Plasma Depositing Process Electrochemical Corrosion Behaviors of Ti2AlNb with Double Glow Plasma Surface Molybdenized Research on Surface Low Alloy HSS by Plasma Surface Metallographic W, MO, C Alloying Some Problems on Evaluating Elastic Modulus of APSed Ceramic Top Coat for TBCs by Indentation Method Collaboration Tasks on Physical and Fundamental Properties of Plasma Sprayed Thermal Barrier Coatings in Japan Society of Materials Science Mechanical Properties of 316L Stainless Steel with Nanostructure Surface Layer Induced by Surface Mechanical Attrition Treatment Evaluation of Silica Content on Fracture Toughness of PI/SiO2 Hybrid Films Oxidation Resistance of Ti-6Al-4V by Plasma Niobium Surface Alloying The Processing of Anti-Rust Boronizing Layer on Steel Surface Colossal Magnetoresistance Effects of La1-xSrxMnO3 Effect of R.F. Power on Structures and Properties of Amorphous Fluorinated Carbon Films Prepared by PSII Molecular Dynamics Simulation of Exit Fracture in the Case of Nanometric Cutting Process Surface Plasma Molybdenized Burn-Resistant Titanium Alloy Study of Delamination of Thin Film Coating on Cyclic Nano-Indentation Test Processing of Environment Protective Phosphating and its Coating Properties Synthesis of Boron Carbonitride Films by Plasma-Based Ion Implantation Influence of Temperature on Characteristics of TiAl Plasma Surface Niobiumizing Finite Element Study of the Creep Size-Effect in Thin Metal Films Surface Morphology, Crystal Orientation and Scratch Properties of Au/NiCr/Ta Multi-Layered Metallic Films Microstructure and Resistivity of Low Temperature Deposition ITO Films on PET Substrate by Magnetron Sputtering XPS Analysis of Silicon Oxycarbide Formed on the Surface of Rf-Sputter Deposited SiC Thin Films Effects of Dynamic Ion Mixing Coating Condition for Fatigue Properties of Stainless Steel with TiN Film Improvement of Oxidation Property of SUS304 by Gas Barrier Coating Study of Boron-Doped Diamond Films by Microwave Plasma CVD Method Influence of Ion Bombardment Process on Adhesion between CrN Coatings and Aluminum Alloy Study on Sputtering Characteristics of Ni80Cr20 Alloy Target Microstructure and Properties of Microarc Oxidation Ceramic Coatings on Aluminum Alloy Mo-Si-C-N Multi-Layer Anti-Oxidation Coating on C/C Composites Development of Diamond-Like Carbon (DLC) Coating Compatible Surface by Fine Particle Bombardment (FPB) The Research of Integral Cu-W Electric Contact by Friction Welding Finite Element Simulation for Residual Stresses in Weling Process Study on Al Alloy Welded Joint Performance Deterioration under Thermal Cycling Condition Three Dimensional Monte Carlo Simulation of Grain Growth in HAZ of Stainless Steel SUS316 Static and Dynamic Force Analysis to Large-Scale Bed of Leather Cutting Machine Tool Study on the Process Parameters of MPAW-Based Rapid Prototyping Deformation and Fracture Behaviors in the Freestanding APS-TBC - Effects of Process Parameters and Thermal Exposure Distributions of Residual Stresses in Diffusion Bonding of Dissimilar Materials Intermetallics TiAl to Steel 40Cr and Effect of Interlayer Interfacial Resistance Method for Quality Evaluation of Diffusion Bonded Joints Strength Predication for Load-Bearing Lugs of Three-Dimensional Braided Composites Failure Assessment Diagrams of Semi-Elliptical Surface Crack with Constraint Effect Application of Twin Laser Beam on AZ31/A5052 Dissimilar Metals Welding Effects of Adhesive Joint on the Failure Strength Properties of Natural Fiber Reinforced Composite Effects of Fiber Layer on Failure Strength Properties of Adhesive - Joined Natural Fiber Reinforced Composites Effects of Chemical Composition and Welding Process on Fracture Resistance of Type 347 Stainless Steel Weld Effects of Resistance Welding on the Failure Strength Properties of Natural Fiber Reinforced Composite A Study on Mechanical Properties and Durability Evaluation of Structure Adhesived and Spot Welded Joints Computer Aided Development of the Crack-Free Laser Welding Processes An Estimation Formula of the Stress Concentration Factor of the Butt-Welded Joint Microstructure in the Interface between CVD Diamond Thick Film and a Ag-Cu-Ti Braze Alloy Method of Lines to Solve 2-D Steady Temperature Field of FGM The Effects of Energy Director Shape on Temperature Field during Ultrasonic Welding of Thermoplastic Composites Modeling of the Temperature Field during Electron Beam Welding of Aluminum Alloy by a Pre-Defined Keyhole Cracking Resistance of Cu-Bearing Age-Hardening Steel Microstructure and Mechanical Properties of Simulated Heat Affected Zone of an Ultrafine Grain Steel Laser Weld Development of Cu Brazing Sheet with Cu-P Composite Plating Effect of Properties of Underfill Materials on Thermal Stress Relief in Lead-Free Solder Joint of Chip Size Package Influence of Content of Ni and Ag on Microstructure and Joint Strength of Lead-Free Solder Joint with Sn-Ag-Cu-Ni-Ge A Study of Self-Loosening and Fatigue Failure of Bolted Joint under Transverse Vibration - Influences of Property Class of Bolt and Plastic Region Tightening A Study on Friction Stir Welding with Heating of Aluminum Alloy Crack Growth Characteristics of Pure Copper for Smart Stress Memory Patch Microstructure and Strength of Alumina-Metal Joint Brazed by Activated Molybdenum-Manganese Method Thermal Fatigue Mechanism of Welding Deposited Metal of Dies Steels Fatigue Properties of a T Type Welded Joint in a Small-Sized Single Pass Boiler Header A Representative Stress Model Removing Weld Joint Type Dependency of S-N Curve Fatigue Durability Analysis Based on FE Modeling Support System for Arc-Welded Members in Automobile Suspension Module Fatigue Strength Evaluation of Load-Carrying Fillet Weldments under Out-of-Plane Bending Load Using Structural Stress Method Evaluation of Local Tensile Properties of Bi-Metallic Weld Joints by Small Tensile and Ball Indentation Tests Effect of Residual Stress and Weld Metal on Hysteretic Behavior of a Welded Tubular T-Joint Assessment of a New Semi-Rigid Model in Steel Beam-to-Column Connections Study on the Evolution of Welding Residual Stress under Tension Loading Condition A New Strategy for In-Service Inspection of Nuclear Piping Considering Piping Failure Frequency Joining of SiC Ceramic to High Strength Graphite Using Polysiloxane with Active Additive Heating Characteristics of Gas Tungsten Arc Welding of Copper Thick Plates with Shielding Gas of Argon, Helium or Nitrogen Effects of the Welding Residual Stress on the Grounding Damage Analysis of a Tanker Synthesis and Characterization of Nanosize Molybdenum Disulfide Particles by Quick Homogeneous Precipitation Method Preparation and Characterization of Cr2O3 Nano-Powders by Sol-Gel Method A Study on Concrescence of Inert Nano Bioceramic Scalpel Wounds Fabrication and Fracture Properties of Nano-Sized HAP-TZP (3Y) Bioceramic for Artificial Joints SEM In Situ Investigation of the Effects of Ca and Sr Additions on Cracking in Cast AZ91D Alloys at Different Temperatures Adhesion Evaluation of Titanium Oxides Films on 316L Stainless Steel Substrate Synthesis of SnO2 Nanoparticles and Their Application on Gas Sensors Ultrafine TiO2 Powders Prepared from Aqueous TiCl4 Solutions at Room Temperature The Synthesis and Properties Studying of 1-D TaS2 Nanostructure Near Full Density Nano Iron-Based Materials by Pulse Current Sintering Lactose Modified Chitosan Scaffold for Hepatocytes Culture Phenomenological Study of the Size Effect on Martensitic Transformation in Nanograined Powders Comparison of Property of Dynamic Melting-Loss H13 Steel by Different Surface Treatment Molecular Aspect of Osteoporotic Fracture Healing Synthesis and Characterizations of Nanocubes, Monodispersed Nanocrystals and Nanospheres of Au Preparation and Performance under Corrosive Environment of Epoxy-Nanocomposite Synthesis of Silicon Carbide Nanowires Doped with Al2O3 Preparation of Iron Oxide Nanoparticles by a Pyrosol Technique Biomechanical Analysis on the Foot under Normal and Abnormal Gait for Orthotics Design Effect of pH Values on Conversion of Calcite Crystals into Calcium Phosphate Phases in Buffer Solutions Compressive Instability of Carbon Nanotubes Effects of Temperature and Concentration on the Nano-Sized Hydroxyapatite Whisker Prepared by Chemical Precipitation Method Mineralization of Chitosan via Alternate Soaking Effective Structural Parameters of Armchair Carbon Nanotubes Studying Effects of Bias Voltage on Properties, Wettability and Platelet Adhered Behavior of DLC Films Prepared By DC-MFCVAD Development of High Technology for Improvement of Fatigue Strength in the Intervertebral Disc Herniation's Cervical Attachment System Evaluation of Fatigue Transverse Cracking Behavior by Cooperation of Sliding Core and Endplate in Artificial Intervertebral Disc Stress Analysis of the Swelling and Deswelling Process of Thermo-Responsive Gel Development of Bone-Like Composite Material and its Properties Evaluations of Elasto-Plastic Properties and Fracture Strength Using Indentation Technique Young's Modulus of Polysilicon Thin Film Evaluated by Finite Element Analysis Biomechanical Analysis of the Musculoskeletal System of Human Foot by Using Passive Elastic Characteristics of Joint Mechanical Behavior during Self-Oscillating of NIPAAm-Co-(Ru(bpy)3 Gel The Swelling Behavior of Organoclays Molecular Modeling of the Dimers from Cyclo-[(1R, 3S)- -Acc-D-Phe]3 Mechanical Properties on Nanoindentation Measurements of Osteonic Lamellae in a Human Cortical Bone Adhesion Test of Nanostructured Materials by a Novel AFM Probe Self-Assembly Effects of Cyclic Peptide Dimers: Molecular Modeling Study Effects of Nitrogen Implantation on the Bonding Strength of Porcelain Fused to Pure Titanium Nanomechanical Properties of Tooth and Bone Revealed by Nanoindentation and AFM Research and Development of Calcium Phosphate Cement The Quantitative Measurement Model of ACFM Based on Swept Frequency Method Nondestructive Evaluation of the Corroded Pipe by Time-Frequency Analysis Wavelet Analysis of Elastic Wave for Wall Thinned Inconel 690 Tube Nondestructive Detection of a Crack in a Triangular Cantilever Beam Based on Frequency Measurement Model Based Online Diagnosis of Rotating Machinery Structural Damage Correlation between Crack Growth Rate and Magnetic Memory Signal of X45 Steel Ultrasonic Fast-Identification Expert System of the Auto Stick-Weld Defect Based on Echo-Characteristics Analyzing Experimental Investigation on Residual Stress of Model S1100 of Crankshaft Chamfer Based on XRD Numerical Analysis of the Measuring Errors in Quantitative Detection of Defects with Shearing Speckle Pattern Interferometry Application of Nondestructive Detecting Technology for Geological Radar in a Large-Scale Highway Lanslide Treatment Infrared Thermal Image Study on Failure of Granite with Hole Damage Detection Based on the Cross Correlation Function Amplitude Vector and its Application to the ASCE Benchmark Structure Influence of Heterogeneity on Direct Tensile Failure Process of Rocks and Associated Fractal Characteristic of AE Damage Identification of Rock Mass with Artificial Neural Networks Experimental Study on Crack Propagation by AE Location under Uniaxial Compression Condition Experimental Verification and Theoretical Analysis on Felicity Effect of Acoustic Emission in Concrete Statistical Damage Detection of Laminated CFRP Beam Using Electrical Resistance Change Method Compaction Quality of Bitumen Mixtures Based on Ultrasonic Methods Non-Destructive Evaluation of a Delamination in Laminates by Lamb Wave Propagation Measurement of Acoustic Impedance of Thin Polymeric Films by Acoustic Resonant Spectroscopy Crack Growth Mechanisms from 3-D Surface Flaw with Varied Dipping Angle under Uniaxial Compression The Crack Growth Mechanism from 3-D Surface Flaw with Strain and Acoustic Emission Measurement under Axial Compression Quantitative Evaluation of Cracks under Water by Microwaves A Study on the Vibration Characteristics of Symmetry and Asymmetry Laminated Composite Materials by Using ESPI A Study of Magnetic Charge per Unit Area of Dipole Model for the NDE Improvement of Crack Detection Probability by Using Magnetic Camera and Image Processing Development of Signal Processing Circuit of a Magnetic Camera for the NDT of a Paramagnetic Material Development of Numerical Analysis Software for the NDE by Using Dipole Model Understanding and Detecting Early Stages of SCC Initiation in Sensitized Stainless Steel by Means of Electrochemical Potential Transients Non-Destructive Evaluation of Creep Damage of Ni-Based Superalloy Using A Scanning Blue Laser Microscope In Situ X-Ray Stress Measurement in Electrodeposited Cu Foils under Tensile and Fatigue Loading Analysis of High Active AE Signal by Continuous Waveform Recorder In-Process Damage Monitoring and Stress Analysis of Thermal Spray Coating Pressurized Water Corrosion Resistance of Carbon Steels and Their Nondestructive Characterization An Evaluation on Corrosion Effect of Carbon Steel Using the NDT Study on Damage Mechanism of Pipe Using Ultrasonic Wave and Acoustic Emission Technique Measurement of Residual Stress in Water Pipe Welds Using the Hole-Drilling Technique X-Ray Stress Measurement of Fiber Reinforced Plastics Composite Material Study on Fault Detection and Diagnosis of the Edge-Transmission Ball Mill System Damage Detection and Quantitative Assessment for the Cracked Beam Structures Quantitative Estimation of the Fastening Condition of a Bolt with Using Piezoceramic (PZT) Sensors Identification of a Defect Using the Equivalent Load Method Influence of Observation Errors on the Identification of External Loads Analysis of Stress Intensity Factors of a Planar Rectangular Interfacial Crack in Three Dimensional Bimaterials Coupling Analysis of Fluid Film and Thermal Deformation of Sealing Members in Spiral Groove Mechanical Seal Reliability-Based Sensitivity Design of Beam Structure with Non-Normal Distribution ANN-Based Crack Identification in Rotor System with Multi-Crack in Shaft The Inhibition Effect of Imidazoline and Diethylene Triamine on the Stress Corrosion Cracking of 08Cr2AlMo Steel in H2S Solution Research on the Control Function and Control Arithmetic of Automobile Automatic Brake A Method to Determine the Periodic Solution Based on Observed State Information and Nonlinear Analysis of Hydrodynamic Bearing-Rotor System Study on Looseness and Impact - Rub Coupling Faults of a Vertical Dual-Disk Cantilever Rotor- Bearing System Investigation on Levitation and Restitution Mechanisms of FPD Air Handling System Probabilistic Cyclic Constitutions and Design Curves of 0Cr18Ni10Ti Pipe Steel Statistical Reconstruction of the One-Dimensional Mechanical and Fatigue Strengths A Statistical Load Weighted Average Fatigue Reliability Model for Uncertain Constant Amplitude Cyclic Load Stability of Two-Span Rotor-Bearing System with Coupling Faults of Crack and Rub-Impact Correction on Parameters in Torsion Vibration Model for Turbine-Generator Shafts Stability Analysis of Cut Rock Slope with Reinforcement by Steel Cables Effects of External Loads on the Reliability of Welded Pipe with Circumferential Crack One Method of System Analysis Based on Some Parameters in the Underground Chambers and Application Reliability Analysis of Railway Tunnel Construction Process within Soft and Weak Rock Mass Using the Unified Elasto-Plastic Strength Criterion A New Concept for Assessing System Reliability Based on Probability Decomposition Method Mechanical Reliability of a Segmented Silicon Layer on Ultra-Thin Polyimide Substrates The Relation of the Geometric Parameters to the Maximal Principal Stress of Crankshaft Analyzing the Strength and Stability of Large Underground Cavern Group with Different Generator Socket Construction Schemes Based on Three Dimensional Numerical Simulation Reliability Analysis for Rotor-Stator Systems with Rubbing First Passage of Uncertain Nonlinear MDOF Systems with Uncorrelated Failure Modes Study on the Relationship of Hydrogen Content and Ultrasonic Propagation Properties Influence of Different Loading Modes on Rock Tensile Strength Fuzzy Method to Determine Probability Distribution Type of Fatigue Crack Data Effects of Various Types of Distribution on Probabilistic Method and FAD Experimental Study on Cracking and Integrity Stability of Xiluodu Arch Dam The Safety Assessment of Wheelchair Occupants in Road Passenger Vehicles in a Frontal Crash: A Computer Simulation Study on the Mechanical Bend Fatigue of Micro-Joining Soldered Joint with Lead-Free Solder Expansion Behavior of Portland Cement Mortars under Sulfate Attack A Study on the Static Buckling Load Estimation of the Spacer Grid in the Pressurized Water Reactor Fuel Assembly Precision Diagnosis of Electric Multiple Units for Performance Evaluation Optimal Placement of Multi Circular Heat Sources of HANARO Irradiation Test Comparison of Reliability of Solder Joints by FORM and SORM Damping Analysis of Asymmetrical Comb Accelerometer Safety Evaluation of Pressure Piping with Weld Flaw after Long Time Service in a Water Power Plant Research on Crack Measurement Technique in Solids Material with Digital Image Correlation (DIC) Corrosion Behavior of Thixoformed AZ91D Magnesium Alloy in NaCl Aqueous Solution Corrosion of 16Mn in High Pressure Carbon Dioxide Saturated NACE Solutions with Hydrogen Sulfide Study on Reliability Analysis of Tailings Dam Stability Risk Based Approach of In-Service Inspection and Maintenance for Petrochemical Industries Fault Diagnosis Expert System Integrated Developing Environment Based on CLIPS Status Monitoring and Fault Diagnosis Network System Based on UPnP Resonance Reliability Assessment of Turbine Blade with Parametric Uncertainty Heat-Aging Effect on the Material Properties and Useful Life Prediction of Rubber Materials Creep Life Prediction of Waspaloy Using the Initial Strain Parameter Technique Evaluation of Drop Impact Load for Thin Cone-Shaped Structures Increasing Damping Ratios in a Tuned Liquid Damper Using Damping Bars Influence of Tapered Cross Section on Fatigue Damage of Cladding Fasteners on Side Faces of Tall Buildings Influence of Non-Gaussian Local Wind Pressures on Fatigue Damage of a Cladding Fastener on a Side Face of a Tall Building Stress Analysis of Automotive Engine Cover under Static and Vibration Load Impact Analysis for the Egg-Crate Structure of a Nuclear Fuel Assembly by Using FEM Structural Response and Behavior Analyses of Steel Joint Components at Elevated Temperatures Numerical Simulation of Deformation and Strength of Reinforced Concrete Slabs under Thermal-Mechanical Loads Fracture Characteristics of a Hybrid Composite Joint Beam for the Tilting Car Body under Static and Fatigue Transverse Loads A Simple Spline Integral Equation Method for Circular Plates with Variable Thickness Design Technology of -Shaped Seal Ring Based on Plastic Limit Analysis Uniform Wearing Optimum Design of Extrusion Die Profile A New Numerical Method for Axisymmetrical Bending of Circular Plates with Large Deflection Stability Analysis on Surrounding Rockmass of Deep Tunnel Based on YAI and FD Concepts 12Finite Element Analysis of an Automobile Clutch System Prediction of Cutting Chatter Based on Hidden Markov Model An Integrated Neural Classifier for Stream Turbine Damage Identification Based on PSO Nonlinear Response of Clamped Circular Plates Subjected to Transverse Excitation Load The Application of ISDG Method on the Mechanical Property Measurement of the Welding-Line Material Structural Strength Evaluation of a Carbody by Finite Element Analysis and Load Test Effect of Nonlinear Shear Strength Characteristic on the Slope Stability of Super High Rockfill Dam Wetting Effects of Rockfill on the Deformation of the Yellow River Xiaolangdi Dam Performance Evaluations of the 3rd Rail Type Power Collector for Rubber-Tired Vehicles Fatigue Properties of Spherical Graphite Iron Crankshafts Calculation of Dynamic Parameters of Elastic Thin Plates under Blast Loading Application of the Rubber Panel Structure for Railway Crossings Application of Distance Evaluation and its Improved Algorithms in Engineering Materials Selection On Stress Concentration Character at the Abnormal Cross-Section of the Concentric Shaft with Bigger Diameter Ratio Analysis of Performance Characteristics in Deteriorated Subway Rolling Stock Application of Data Mining Technology in Structural Strength Design The Microstructures and Catalysis of Metallic Films Covering Diamond Single Crystals Synthesized from Fe-Ni-C System Design of a Novel Micromachined Gyroscope with Compensatory Capacitance Effects of Phase-Equilibrium Temperature and Pressure on the Thickness Decision of a Methane Hydrate Container Fatigue Assessment for Ship Structure Acted on Non-Linear Wave Loads Quantitative Analysis of Transmission Shafts after Torsion Fatigue Test Wavelet Denoising of the Horizontal Vibration Signal for Identification of the Guide Rail Irregularity in Elevator An Enhanced Pre & Post Processing Technique for the Three Dimensional Tunnel Analysis: Tunnel Modelling Wizard Development of 3-Axis Load Cell for Measuring the Side-Force of the Rear Damper of MPV Fatigue Design of Gas Welded Joint for the Railroad Car Body Using the Hot Spot Stress Fatigue Design of the Railroad Car Body Member Using a Simulated Single Spot Welded Joint Square-Structure Estimation of Bolt Fastening Conditions with Using PZT Patches Structural Analysis of Boom System in 42m Aerial Platform Truck Mechanical Behaviors of a Power Steering Hose Assembly during the Swaging Process Codes and Practice of Fatigue Design for Welded Structure Development of a Material Mixing Method for Topology Optimization of a Structure with Multiple Thermal Criteria Optimum Design of a Dynamic Micro-Mixer for Multiphase Flow Optimum Design of a Planar Micromanipulator Using Displacement Amplifier Axiomatic Design of a Spatial Micromanipulator and Experimental Verification Topology Optimization of the Inner Reinforcement for a Vehicle's Hood Using Smoothing Scheme Optimization of Materials and Modal Analysis for Motorcycle Frame Structural Stability Evaluation for Lifting Lug Design of Large Marine Engine by Finite Element Analysis Static and Fatigue Analysis of a Hybrid Joint Part for the Tilting Car Body Degradation and Failure Mechanisms of EPDM Rubbers for Automotive Radiator Hoses Thermal Deformation Analysis of Copper Microbridges with Speckle Interferometry and Finite Element The Mechanisms Analysis of the ACF Bonding Strengths after the High Temperature/ Humidity Environment Test Effects of Nano Fillers on the Conductivity, Adhesion Strength and Reliability of Isotropic Conductive Adhesives (ICAs) Microstructure and Mechanical Properties of High Densification Mo/Cu Composites Microstructure and Properties of Environmental-Friendly Sip/4032Al Composites Used for Electronic Packaging A Study on Failure Prediction of Airborne Electronic Equipment Study on the Service Life of Electronic Equipment Thermal Stress Distribution in the Corner of IC Package Structure Thermal Stress Analysis of MCM Package Using Diamond Material Torsional Fatigue of 63Sn-37Pb and Sn-0.7Cu Solders Research on Creep Properties of Sn2.5Ag0.7CuXRE Lead-Free Soldered Joints for Surface Mount Technology In Situ Thermal-Mechanical Fatigue Testing of Thin Au Lines Theoretical Analysis of Young's Modulus and Dielectric Constant for Low-k Porous Silicon Dioxide Films Micro/Nano Film Getters for Vacuum Maintenance of MEMS Isothermal Aging Effects on the Microstructure, IMC and Strength of SnAgCu/Cu Solder Joint A Comparative Study of the Solder Joint Reliability in Flip Chip Assemblies with Compliant and Rigid Substrates Behavior of Anisotropic Conductive Joints under Hygrothermal Conditions Interface Cracking of Plastic Electronic Package under Temperature and Humidity Environment Shape Prediction and Reliability Design of Ball Grid Array Solder Joints Low-Temperature Sintering of Nanoscale Silver Paste for Large-Area Joints in Power Electronics Modules Fluctuation Mechanism of Mechanical Properties of Electroplated-Copper Thin Films Used for Three Dimensional Electronic Modules Threshold Current Density of Electromigration Damage in Angled Polycrystalline Line Crack Propagation Behavior at Sn37Pb-Copper Interface in Low Cycle Fatigue Hardness and Elastic Modulus of ZnO Thin Films Fabricated by PLD Method On Using Discrete Particle Approaches for Simulating the Perforation Process of Concrete Slab by Hard Projectile Fractal Characterization of Sealing Surface Topography and Leakage Model of Metallic Gaskets Effect of C/Ti Ratio and Al Powder Size on Microstructure and Performance of Al-Ti-C Grain Refiner The Analysis to the Correlation between Cooling Medium and Cooling Result of DWTT Specimen Effect of Spring Pressure on Basic Performance of Contacting Mechanical Seals Finite Element Analysis of Dongjusi Railway Tunnel within Hard Rock Mass Based on the Unified Rock Mass Strength Criterion Analysis of Valence Electron Theory on the Catalytic Mechanism of Diamond Single Crystal Growth Exact Relationships between Eigenvalues of FGM Circular Plates Based on RPT and those of Isotropic Homogeneous Circular Plates Based on CPT Application of Innovative GFRP Pipe Soil Nail System in Hong Kong The Abnormal Viscosity Variation Behavior of Melt Bi Modeling of the Effect of Excavation Mode on the Extent of the Anisotropic Zone Surrounding Deep Tunnels Effect of Rotation to a Half-Sapce in Magneto-Thermoelasticity with Thermal Relaxations Analysis on the Gravel Stratum Deformation by Dewatering Study on the Electrochemical Behavior of the Weldment for SPV50Q Steel in H2S-Containing Environment Evaluation of Stress Corrosion Cracking of Type 304L Stainless Steel in Low Concentration Sodium Hydroxide Solution with High Temperature Research on the Non-Contact Manipulation of Biomaterials in the Stationary Sound Field of Ultrasonic Transducers Application of Superelasticity of SMAs in Bolted End-Plate Connection Crystal Structure of the New Compound NdFeSb3 The Deformation of Discontinuity in the DDA Method Investigation on Purification and Degassing of TiB2/Al Composite Fabricated by LSM Method Polyimide-Epoxy Blend for Binding Silicon Steel Sheets of Aerospace Electrical Machineries Investigations on Hydrogen Content Change in Melt Aluminum during Casting under Adjusted Pressure Investigation on Friction and Thermal Expansion Coefficients of Al-Sn Bearing Alloys Steel Water Continuous Casting Slag Detection System Based on Wavelet The Cutting Energy of Rubber Cutting by a Sharp Cutter Study on Structure of the New Polymer-Poly (Propylene-Co- -Butyrolactone Carbonate) with Molecular Model Experimental Analysis of Chemical Damage of Water to Soil Structure Research on Mechanism of Stabilized Soil Mechanics Enhanced by Con-Aid Liquid Stabilizer The Carbonyl Group Measurement of the Membrane Copolymerized by Low-Temperature Plasma at Atmospheric Pressure of C2H2 and CO2 Influence of the Thickness and Frequency in the Infrared Hybrid Method in Consideration of Heat Conduction Accuracy of Measurement of the Infinitesimal Deformation in Digital Image Correlation and the Intelligent Hybrid Method Intensity of Singular Stress at the End of a Fiber under Pull-Out Force Free-Edge Stress Singularity of Bonded Dissimilar Materials with an Interlayer Structural Human Impact Analysis on Shooting: Experimental and Simulation Computer-Aided Optimized Design for Multi-Alloyed Steels Specifying Hardenability Requirements Flow-Induced Corrosion Simulation on a Plate by Finite Element Methods "Glass Cullet" Generation Technique by Underwater Shockwave for Recycling System of Glass Bottles Accurate Determination of Stress Intensity Factor for Interface Crack by Finite Element Method Influence of the Various Li/Nb Ratios on Defect Structure and Photorefractive Properties of In: Eu: Fe: LiNbO3 Crystals Grain Refinement and Eutectic Solidification Mechanism of Al-Si Hypoeutectic Alloy in Centrifugal Casting with Electromagnetic Field Microstructure and Ferroelectric Domains of SrBi2Ta1.6Nb0.4O9

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB16117369
• ISBN:
  • 9780878494569
• LCCN: 2008272994
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zurich, Switzerland
• ページ数/冊数: xlvi, 734 p.
• 大きさ: 25 cm
• 分類:
  • LCC : TA401.3
  • DC22 : 620.1/126
• 件名:
  • LCSH : Fracture mechanics -- Congresses
  • LCSH : Strength of materials -- Congresses
• 親書誌ID:
  • BA1292205X